三维编织复合材料研究进展

Abstract

Abstract:

This article provides a review of studies about three-dimensional (3D) braided composites, focusing on the key achievements of various stages. Important developments in the field, including the latest work of our group, are discussed in terms of research method and orientation. With regard to the braided process of composites, the application of meso-structures and their influences on the maximum fiber volume fraction are revealed, and the popular modeling methods are also reviewed. Moreover, the partition schemes of periodical cells and the simulation of the fiber section patterns are viewed as the two key points in parameterized modeling. In the experimental studies, the effect of braiding angle on the mechanical properties of composites is emphasized, while in theoretical investigation, the multiscale methods and the eigenelement method are stressed. Finally, problems that deserve further studies are presented.

Key words: composite materials, 3D braided fabrics, mechanical property, model building, homogenization method, multiscale

CLC Number:

V258
TB330.1

Wang Xingming;Xing Yufeng. Developments in Research on 3D Braided Composites[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(5): 914-927.

References

［1］Mouritz A P, Bannister M K, Falzon P J, et al. Review of applications for advanced three-dimensional fiber textile composites［J］. Composites Part A: Applied Science and Manufacturing, 1999, 30(12): 1445-1461.

［2］Brown R T. Design and manufacturing of 3-D braided preforms［C］∥Proceedings of the Fifth Textile Structural Composites Symposium. 1991.

［3］严实, 吴林志, 孙雨果, 等. 三维四向编织复合材料有效性能的预报［J］. 复合材料学报, 2007, 24(1): 158-166.  Yan Shi, Wu Linzhi, Sun Yuguo, et al. Evaluation of elastic properties of 3D 4-directional braided composites［J］. Acta Materiae Compositae Sinica, 2007, 24(1): 158-166. (in Chinese).

［4］Popper P, McConnell R F. Complex shaped braided structures: US 4719837［P］. 1988.

［5］李嘉禄, 孙颖. 二步法方型三维编织复合材料的细观结构［J］. 复合材料学报, 2002, 19(4): 69-75.  Li Jialu, Sun Ying. Microstructure of the two-step rectangle 3D braided composites［J］. Acta Materiae Compositae Sinica, 2002, 19(4): 69-75. (in Chinese).

［6］Brookstein D S. Interlocked fiber architecture: braided and woven［C］∥Proceedings of the 35th International SAMPE Symposium. 1990: 746-756.

［7］Ko F K. Braiding［M］∥Dostal C A. Engineered materials handbook, Vol.1: Composites. ASM International, 1987: 519-528.

［8］Li W, Hammad M, El Shiekh A. Structural analysis of 3-D braided preforms for composites. PartⅡ: The two-step preforms［J］. Journal of Textile Institute, 1990, 81(4): 515-537.

［9］Byun J H, Whitney T J, Du G W, et al. Analytical characterization of two-step braided composites［J］. Journal of Composite Materials, 1991, 25(12): 1599-1618.

［10］Wang Y Q, Wang A S D. On the topological yarn structure of 3-D rectangular and tubular braided preforms［J］. Composites Science and Technology, 1994, 51(4): 575-586.

［11］Pandey R, Hahn H T. Visualization of representative volume elements for three-dimensional four-step braided composites［J］. Composites Science and Technology, 1996, 56(2): 161-170.

［12］Mohajerjashi S. More on the fiber architecture of 3-D braided composites［R］. AIAA-1997-1404, 1997.

［13］卢子兴, 杨振宇, 李仲平. 三维编织复合材料力学行为研究进展［J］. 复合材料学报, 2004, 21(2): 1-7.  Lu Zixing, Yang Zhenyu, Li Zhongping. Development of investigation into mechanical behaviour of three dimensional braided composites［J］. Acta Materiae Compositae Sinica, 2004, 21(2): 1-7. (in Chinese).

［14］马文锁, 赵允岭, 冯伟. 三维编织复合材料理论研究进展［J］. 材料科学与工程学报, 2006, 24(2): 631-636.  Ma Wensuo, Zhao Yunling, Feng Wei. Progressing in the research on 3D braided composites［J］. Journal of Materials Science & Engineering, 2006, 24(2): 631-636. (in Chinese).

［15］邵将, 温卫东, 崔海涛. 三维编织复合材料刚度和强度性能研究进展［J］. 材料科学与工程学报, 2007, 25(3): 460-467.  Shao Jiang, Wen Weidong, Cui Haitao. Advances of study on stiffness and strength of three-dimensional braided composites［J］. Journal of Materials Science & Engineering, 2007, 25(3): 460-467. (in Chinese).

［16］Ko F K, Pastore C M. Structure and properties of integrated 3D fabric for structural composites［C］∥Vinson J R, Taya M. Recent Advances in Composites in the United States and Japan. Philadelphia: American Society for Test-ing Material, 1985: 428-439.

［17］Ma C L, Yang J M, Chou T W. Elastic stiffness of three-dimensional braided textile structural composites［C］∥Whitney J M. Composite Materials: Testing and Design. Philadelphia: American Society for Testing Material, 1986: 404-421.

［18］Yang J M, Ma C L, Chou T W. Fiber inclination model of three-dimensional textile structural composite［J］. Journal of Composite Materials, 1986, 20(5): 472-484.

［19］Du G W, Chou T W, Popper P. Analysis of three-dimensional textile preforms for multidirectional reinforcement of composites［J］. Journal of Materials Science, 1991, 26(1): 3438-3448.

［20］Du G W, Ko F K. Unit cell geometry of 3-D braided structures［J］. Journal of Reinforced Plastics and Compo-sites, 1993, 12(7): 752-768.

［21］吴德隆, 郝照平. 五向编织结构复合材料的分析模型［J］. 宇航学报, 1993(3): 13-16.  Wu Delong, Hao Zhaoping. 5D braided structural composites［J］. Journal of Astronautics, 1993(3): 13-16. (in Chinese).

［22］Wang Y Q, Wang A S D. Microstructure/property relationships in three-dimensionally braided fiber composites［J］. Composites Science and Technology, 1995, 53(2): 213-222.

［23］Byun J H, Chou T W. Process micro-structure relationships of 2-step and 4-step braided composites［J］. Compo-sites Science and Technology, 1996, 56(3): 235-251.

［24］韩其睿, 李嘉禄, 李学明. 复合材料三维编织结构的单元体模型［J］. 复合材料学报, 1996, 13(3): 76-80.  Han Qirui, Li Jialu, Li Xueming. Unit cell geometry of 3-D braided structure of composites［J］. Acta Materiae Compositae Sinica, 1996, 13(3): 76-80. (in Chinese.

［25］Chen L, Tao X M, Choy C L. Mechanical analysis of 3D braided composites by the finite multiphase element me- thod［J］. Composites Science and Technology, 1999, 59(16): 2383-2391.

［26］Chen L, Tao X M, Choy C L. On the microstructure of three-dimensional braided preforms［J］. Composites Science and Technology, 1999, 59(3): 391-404.

［27］庞宝君, 杜善义, 韩杰才. 三维四向编织复合材料细观组织及分析模型［J］. 复合材料学报, 1999, 16(3): 135-139.  Pang Baojun, Du Shanyi, Han Jiecai. Meso-structure and modeling of thee-dimensional multi-directional composites［J］. Acta Materiae Compositae Sinica, 1999, 16(3): 135-139. (in Chinese).

［28］徐孝诚, 孙德海, 黄小平. 三维编织复合材料细观结构的几何学分析［J］. 强度与环境, 1999(2): 37-43. Xu Xiaocheng, Sun Dehai, Huang Xiaoping. Geometry analysis on microstructure of 3-D braided composite［J］. Structure & Environment Engineering, 1999(2): 37-43. (in Chinese).

［29］黄小平, 孙良新, 徐孝诚. 复合材料三维四向矩形编织物角柱结构研究［J］. 复合材料学报, 2001, 18(4): 11-15.  Huang Xiaoping, Sun Liangxin, Xu Xiaocheng. Corner microstructure of 3-D rectangular braided preforms for composites［J］. Acta Materiae Compositae Sinica, 2001, 18(4): 11-15. (in Chinese).

［30］Wang Y Q, Wang A S D. Spatial distribution of yarns and mechanical properties in 3D braided tubular composites［J］. Applied Composite Materials, 1997, 4(2): 121-132.

［31］Makiko T, Tadashi U, Asami N, et al. Structure and machine braiding procedure of coupled square braids with various cross sections［J］. Composites Part A: Applied Science and Manufacturing, 2001, 32(10): 1485-1489.

［32］Lomov S V, Ivanov D S, Verpoest I, et al. Meso-FE modeling of textile composites: road map, data flow and algorithms［J］. Composites Science and Technology, 2007, 67(9): 1870-1891.

［33］Tang X D, Whitcomb J D, Goyal D. Effect of braid angle and waviness ratio of effective moduli of 2×2 biaxial braided composites［R］. AIAA-2003-1877, 2003.

［34］Miravete A, Bielsa J M, Chiminelli A, et al. 3D mesomechanical analysis of three-axial braided composite materials［J］. Composites Science and Technology, 2006, 66(15): 2954-2964.

［35］田金梅, 邢誉峰. 一种新的三维四步编织复合材料几何模型及其在宏观弹性性能预测中的应用［J］. 航空学报, 2007, 28(1): 130-134.  Tian Jinmei, Xing Yufeng. Unit cell eigen-element of 3-D orthogonal woven composites and its applications［J］. Acta Aeronautica et Astronautica Sinica, 2007, 28(1): 130-134. (in Chinese).

［36］李金超, 张一帆, 孙菲, 等. 三维五向编织复合材料的力学性能分析Ⅰ: 细观结构模型［J］. 复合材料学报, 2009, 26(1): 150-155. Li Jinchao, Zhang Yifan, Sun Fei, et al. Mechanics analysis of three-dimensional five-directional braided composites Ⅰ: microstructural model［J］. Acta Materiae Compositae Sinica, 2009, 26(1): 150-155. (in Chinese).

［37］Ko F K. Tensile strength and modulus of a three-dimensional braid composite［C］∥Whitney J M. Composite materials: testing and design. Philadelphia: American Society for Testing Material, 1986: 392-403.

［38］Macander A B, Crane R M, Camponeschi E T, et al. Fabrication and mechanical properties of multi-dimensionally (X-D) braided composite materials［C］∥Whitney J M. Composite Naterials: Testing and Design (7th Conf.). Philadelphia: American Society for Testing Material, 1986: 422-443.

［39］Yau S S, Chou T W, Ko F K. Flexural and axial compressive failures of three-dimensionally braided composite I—beams［J］. Composites, 1986, 17(3): 227-232.

［40］Shivakumar K N, Emehel T C, Avva V S, et al. Compression strength and failure mechanisms of 3D textile composites［R］. AIAA-1995-1159, 1995.

［41］Kalidindi S R, Abusafieh A. Longitudinal and transverse moduli and strengths of low angle 3-D braided composites［J］. Journal of Composite Materials, 1996, 30(8): 885-905.

［42］李嘉禄, 肖丽华, 董孚允. 立体多向编织结构对复合材料性能的影响［J］. 复合材料学报, 1996, 13(3): 71-75.  Li Jialu, Xiao Lihua, Dong Fuyun. Influence of three dimensional and multidirectional braid structures on the properties of composites［J］. Acta Materiae Compositae Sinica, 1996, 13(3): 71-75. (in Chinese).

［43］孙慧玉, 吴长春. 纺织结构复合材料力学性能的实验研究［J］. 实验力学, 1997, 12(3): 335-341.  Sun Huiyu, Wu Changchun. Experimental research on mechanical properties of composite materials with textile structure［J］. Journal of Experimental Mechanics, 1997, 12(3): 335-341.

［44］卢子兴, 冯志海, 寇长河, 等. 编织复合材料拉伸力学性能的研究［J］. 复合材料学报, 1999, 16(3): 129-134.  Lu Zixing, Feng Zhihai, Kou Changhe, et al. Studies on tensile properties of braided structural composite materials［J］. Acta Materiae Compositae Sinica, 1999, 16(3): 129-134. (in Chinese).

［45］卢子兴, 胡奇. 三维编织复合材料压缩力学性能的实验研究［J］. 复合材料学报, 2003, 20(6): 67-72.  Lu Zixing, Hu Qi. Experimental investigation into the compressive mechanical properties of three dimensional braided composites［J］. Acta Materiae Compositae Sinica, 2003, 20(6): 67-72. (in Chinese).

［46］庞宝君, 杜善义, 严勇, 等. 三维四向碳-环氧编织复合材料剪切力学性能实验研究［J］. 实验力学, 1999, 14(2): 209-215.  Pang Baojun, Du Shanyi, Yan Yong, et al. An experimental investigation for the shearing mechanical properties of three-dimension four-direction braided carbon/epoxy composite［J］. Journal of Experimental Mechanics, 1999, 14(2): 209-215. (in Chinese).

［47］庞宝君, 杜善义, 韩杰才, 等. 三维四向编织碳-环氧复合材料实验研究［J］. 复合材料学报, 1999, 16(4): 136-141.  Pang Baojun, Du Shanyi, Han Jiecai, et al. Experimental investigation of three-dimensional four-directional braided carbon/epoxy composites［J］. Acta Materiae Compositae Sinica, 1999, 16(4): 136-141. (in Chinese).

［48］Lee W, Kim J H, Shin H J, et al. Constitutive equations based on cell modeling method for 3D circular braided glass fiber reinforced composites［J］. Fibers and Polymers, 2003, 4(2): 77-83.

［49］沈怀荣. 三维编织复合材料冲击实验与分析［J］. 装备指挥技术学院学报, 2002, 13(2): 84-86.  Shen Huairong. Impact experiment and analysis of three braided composite materials［J］. Journal of Institute of Command and Technology of Equipment, 2002, 13(2): 84-86. (in Chinese).

［50］刘宁, 姚学锋, 陈俊达, 等. 编织复合材料的冲击损伤与断裂行为研究［J］. 实验力学, 2002, 17(2): 184-189.  Liu Ning, Yao Xuefeng, Chen Junda, et al. Research on the impact damage and fracture behavior of braided composites［J］. Journal of Experimental Mechanics, 2002, 17(2): 184-189. (in Chinese).

［51］姚学锋, 林碧森, 张志勇, 等. 编织复合材料的裂纹损伤与增长行为研究［J］. 工程力学, 2002, 19(5): 118-122.  Yao Xuefeng, Lin Bisen, Zhang Zhiyong, et al. Crack damage and growth behavior of braided composite［J］. Engineering Mechanics, 2002, 19(5): 118-122. (in Chinese).

［52］王玉果, 王玉林, 吴广顺. 三维编织复合材料在润滑条件下的摩擦性能［J］. 材料科学与工艺, 2005, 13(4): 365-367.  Wang Yuguo, Wang Yulin, Wu Guangshun. Friction and wear characteristics of 3-D braided carbon composites under lubricated condition［J］. Materials Science & Technology, 2005, 13(4): 365-367. (in Chinese).

［53］Wan Y Z, Luo H L, Wang Y L, et al. Friction and wear behavior of three-dimensional braided carbon fiber/epoxy composites under lubricated sliding conditions［J］. Journal of Materials Science, 2005, 40(17): 4475-4481.

［54］李嘉禄, 杨红娜, 寇长河. 三维编织复合材料的疲劳性能［J］. 复合材料学报, 2005, 22(4): 172-176.  Li Jialu, Yang Hongna, Kou Changhe. Fatigue properties of three dimensional braiding composites［J］. Acta Materiae Compositae Sinica, 2005, 22(4): 172-176. (in Chinese).

［55］Calme O, Bigaud D, Hamelin P. 3D braided composite rings under lateral compression［J］. Composites Science and Technology, 2005, 65(1): 95-106.

［56］李典森, 李嘉禄, 陈利, 等. 三维编织复合材料蠕变行为的试验研究［J］. 航空材料学报, 2006, 26(1): 76-79.  Li Diansen, Li Jialu, Chen Li, et al. Studies on creep behavior of three dimensional braiding composite［J］. Journal of Aeronautical Material, 2006, 26(1): 76-79. (in Chinese).

［57］Sun B Z, Gu B H. High strain rate behavior of 4-step 3D braided composites under compressive failure［J］. Journal of Materials Science, 2007, 42(7): 2463-2470.

［58］Norman T, Allison P, Baldwin J W, et al. Effect of tow alignment on the mechanical performance of 3D woven textile composites［J］. Composites Manufacturing, 1993, 4(4): 209-215.

［59］Pastore C M, Gowayed Y A. A self-consistent fabric geometric model: modification and application of a fabric geometry model to predict the elastic properties of textile composites［J］. Journal of Composite Technology and Research, 1994, 16(1): 32-36.

［60］Chen Z, Zhu D, Lu M, et al. A homogenization scheme and its application to evaluation of elastic properties of three-dimensional braided composites［J］. Composites Part B: Engineering, 2001, 32(1): 67-86.

［61］Sun H Y, Di S L, Zhang N, et al. Micromechanics of braided composites via multivariable FE［J］. Computers and Structures, 2003, 81(20): 2021-2027.

［62］Li W, Hammad M, EI Shiekh A. Structural analysis of 3-D braided performs for composites, Part I: the four-step preforms［J］. Journal of Textile Institute, 1990, 81(4): 491-514.

［63］Wu D L. Three-cell model and 5D braided structural composites［J］. Composites Science and Technology, 1996, 56(3): 225-233.

［64］Mohajerjasbi S. Fiber architecture of three-dimensional braided composites［J］. AIAA Journal, 1998, 36(4): 613-617.

［65］Liu Z G, Zhang H G, Lu Z X, et al. Investigation on the thermal conductivity of 3-dimensional and 4-directional braided composites［J］. Chinese Journal of Aeronautics, 2007, 20(4): 327-331.

［66］Benssousan A, Lions J, Papanicolaou G. Asymptotic analysis for periodic structures［M］. North-Holland: Amsterdam, 1978.

［67］Yu X G, Cui J Z. The prediction on mechanical properties of 4-step braided composites via two-scale method［J］. Composites Science and Technology, 2007, 67(3-4): 471-480.

［68］Weinan E, Engquist B. The heterogeneous multiscale methods［J］. Communications in Mathmatical Sciences, 2003, 1(1): 87-132.

［69］Hou T, Wu X. A multiscale finite element method for elliptic problems in composite materials and porous media［J］. Journal of Computational Physices, 1997, 134: 169-189.

［70］Strouboulis T, Copps K, Babuka I. The generalized finite element method: an example of its implementation and illustration of its performance［J］. International Journal for Numerical Methods in Engineering, 2000, 47(8): 1401-1417.

［71］Strouboulis T, Zhang L, Babuka I. p-version of the generalized FEM using mesh-based handbooks with applications to multiscale problems［J］. International Journal for Numerical Methods in Engineering, 2004, 60(10): 1639-1672.

［72］Babuka I, Nistor V, Tarfulea N. Generalized finite element method for second-order elliptic operators with Dirichlet boundary conditions［J］. Journal of Computational and Applied Mathematics, 2008, 218(1): 175-183.

［73］Xing Y F, Tian J M. The homogenization method based on eigenvector expansions for woven fabric composites［J］. International Journal for Multi-scale Computational Engineering, 2006, 4(1): 197-206.

［74］邢誉峰, 田金梅. 三维正交机织复合材料的单胞特征单元及其应用［J］. 航空学报, 2007, 28(4): 881-885.  Xing Yufeng, Tian Jinmei. Unit cell eigen-element of 3-D orthogonal woven composites and its applications［J］. Acta Aeronautica et Astronautica Sinica, 2007，28(4): 881-885. (in Chinese).

［75］Xing Y F, Wang X M. An eigenelement method and two homogenization conditions［J］. Acta Mechanica Sinica, 2008, 25(3): 1614-3116.

［76］邢誉峰, 杨阳. 形函数分段定义的弯矩梁特征单元［J］. 力学学报, 2008, 40(2): 1-7.  Xing Yufeng, Yang Yang. A bending moment beam eigen-element with piecewise shape functions［J］. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(2): 1-7. (in Chinese).

［77］Xing Y F, Yang Y. A new rod eigenelement and its application to structural static and dynamic analysis［C］∥Computational Mechanics Proceedings of “International Symposium on Computational Mechanics”. Heidelberg: Springer, 2007.

[1]	Zhiting GAO, Zhuang MA, Yanbo LIU. Effect of CVD-SiC array structure on ablation resistance of ZrB₂/SiC coatings [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(3): 428842-428842.
[2]	Chao ZHANG, Yong CAO, Zhenqiang ZHAO, Haiyang ZHANG, Jianbo SUN, Zhihua WANG, Duokui YU. Applications and key challenges of polymer composites in civil aero⁃engines: State⁃of⁃art review [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(2): 28556-028556.
[3]	Qian YANG, Yanzhe WANG, Di YANG, Zezhong LI, Weiwei QU. Prediction and planning of automatic laying speed for fiber reinforced composite materials based on data⁃driven model [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(10): 429313-429313.
[4]	Zhifan YE, Jin ZHAO, Zhihui LI, Xiangchun SUN, Dongsheng WEN. Multiscale coupling simulation method for thermal protection material ablation based on thermochemical interfacial reactive model [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(S2): 729469-729469.
[5]	Jian HAN, Shiyong SUN, Bin NIU, Rui YANG, Dongjiang WU. Progress in manufacturing technologies of resin⁃based composite lattice structures [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 628255-628255.
[6]	Zhiqiang ZHANG, Ziming YU, Tiangang ZHANG, Qian YANG, Hao WANG. Microstructure of TiC _x reinforced Ti-based composite coating prepared by laser cladding and first principle study on reinforced phase [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(8): 427294-427294.
[7]	Liping LIU, Yuyang QI, Yueguo LIN, Rui BAO, Jianxin XU, Zhenyu FENG, Guanghui QING. Tensile failure of carbon fiber composite material bonded-rivet hybrid repaired structure [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 428676-428676.
[8]	Xiaoqian CHEN, Yong ZHAO, Senlin HUO, Zeyu ZHANG, Bingxiao DU. A review of topology optimization design methods for multi-scale structures [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(15): 528863-528863.
[9]	WAN Aoshuang. Probabilistic assessment on damage tolerance of composite helicopter horizontal tail structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 525557-525557.
[10]	ZHAO Tian, LI Ying, ZHANG Chao, YAO Liaojun, HUANG Yixing, HUANG Zhixin, CHEN cheng, WANG Wandong, ZU Lei, ZHOU Huamin, QIU Jinhao, QIU Zhiping, FANG Daining. Fundamental mechanical problems in high-performance aerospace composite structures: State-of-art review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526851-526851.
[11]	LIU Zengfei, LIU Kai, ZHANG Binbin, LI Xuefeng, GE Jingran, HUANG Jian, LI Chao, SUN Xinyang, SUN Yu, LIANG Jun. Effect of yarn size on tensile properties of 3D woven composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 525453-525453.
[12]	WANG Miao, WANG Wei, YANG Yunlong, TAN Caiwang, WANG Gang. Effect of brazing time on microstructure and properties of SiC ceramic brazed with CoFeNiCrCu [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525057-525057.
[13]	ZHAO Kehan, LIU Duo, ZHU Haitao, CHEN Bin, HU Shengpeng, SONG Xiaoguo. Effect of brazing temperature on microstructure and mechanical property of C/C/AgCuTi+C_f/TC4 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525007-525007.
[14]	LIU Tianyuan, ZHENG Hangbin, YANG Changqi, BAO Jinsong, WANG Junliang, GU Jun. Explainable deep learning method for laser welding defect detection [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 524961-524961.
[15]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.

Developments in Research on 3D Braided Composites

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments