航空铆钉连接件的抗冲击性能

doi:10.7527/S1000-6893.2018.22484

Abstract

Abstract: Using the split Hopkinson tensile bar device, a series of special riveting specimens for MS20615 rivet are designed, and the dynamic mechanical tests of riveting structures are performed under different loading angles and loading rates. In addition, the quasi-static mechanical properties of riveting structures are also obtained by conducting tests of the pure shear, 30°tension-shear coupling, 45°tension-shear coupling, 60°tension-shear coupling, and pure tension. Results show that the failure modes of riveting structures are significantly influenced by the loading angles and loading rates. Moreover, using the financial software LS-Dyna, the simplified finite element models (FE models) are established. The comparisons of force-displacement curves for the experiments and simulations are conducted to verify the feasibility of the simplified model. Meanwhile, the mesh correlation analysis is also performed as a supplementary verification.

Key words: split Hopkinson tension bar, riveting structures, mechanical property, failure load, failure mode, finite element simulation

CLC Number:

V214.9

WANG Cunxian, GAO Haomai, GONG Xu, SUO Tao, LI Yulong, TANG Zhongbin, XUE Pu, HOU Liang, LIN Jiajian. Impact responses of aeronautic riveting structures[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522484-522484.

References

[1] KULAK G L, FISHER J W, STRUIK J H A. Guide to design criteria for bolted and riveted joints[M]. New York:Wiley, 1987:27-35.
[2] 吴建国. 裂纹扩展与损伤演化理论与应用研究[D]. 北京:北京航空航天大学, 2009:119. WU J G. Theoretical and applied research on crack growth and damage evolution[D]. Beijing:Beihang University, 2009:119(in Chinese).
[3] 崔卫民, 杨智春, 诸强. 离散源撞击下结构生存力研究中的若干问题初探[J]. 机械科学与技术, 2000(S1):70-71. CUI W M, YANG Z C, ZHU Q. Studies on several problems of structure survivability subjected to discrete impact[J]. Mechanical Science and Technology, 2000(S1):70-71(in Chinese).
[4] PORCARO R, HANSSEN A G, AALBERG A, et al. Joining of aluminum using self-piercing riveting:Testing, modelling and analysis[J]. International Journal of Crashworthiness, 2004, 9(2):141-154.
[5] PORCARO R, HANSSEN A G, LANGSETH M, et al. The behaviour of a self-piercing riveted connection under quasi-static loading conditions[J]. International Journal of Solids & Structures, 2006, 43(17):5110-5131.
[6] PORCARO R, HANSSEN A G, LANGSETH M, et al. An experimental investigation on the behaviour of self-piercing riveted connections in aluminium alloy AA6060[J]. International Journal of Crashworthiness, 2006, 11(5):397-417.
[7] LENNON R, PEDRESCHI R, SINHA B P. Comparative study of some mechanical connections in cold formed steel[J]. Construction & Building Materials, 1999, 13(3):109-116.
[8] LORENZO G D, LANDOLFO R. Shear experimental response of new connecting systems for cold-formed structures[J]. Journal of Constructional Steel Research, 2004, 60(3):561-579.
[9] SUN X, STEPHENS E V, KHALEEL M A. Fatigue behaviours of self-piercing rivets joining similar and dissimilar sheet metals[J]. International Journal of Fatigue, 2007, 29(2):370-386.
[10] LI B, FATEMI A. An experimental investigation of deformation and fatigue behavior of coach peel riveted joints[J]. International Journal of Fatigue, 2006, 28(1):9-18.
[11] LI Q M, MINES R A W, BIRCH R S. Static and dynamic behaviour of composite riveted joints in tension[J]. International Journal of Mechanical Sciences, 2001, 43(7):1591-1610.
[12] WOOD P K C, SCHLEY C A, WILLIAMS M A, et al. A model to describe the high rate performance of self-piercing riveted joints in sheet aluminum[J]. Materials & Design, 2011, 32(4):2246-2259.
[13] LIU X C, GUO C Y, BAI C, et al. Drop test and crash simulation of a civil airplane fuselage section[J]. Chinese Journal of Aeronautics, 2015, 28(2):447-456.
[14] PORCARO R, LANGSETH M, HANSSEN A G, et al. Crashworthiness of self-piercing riveted connections[J]. International Journal of Impact Engineering, 2008, 35(11):1251-1266(in Chinese).
[15] LANGRAND B, PATRONELLI L, DELETOMBE E, et al. An alternative numerical approach for full scale characterisation for riveted joint design[J]. Aerospace Science & Technology, 2002, 6(5):343-354.
[16] LANGRAND B, PATRONELLI L, DELETOMBE E, et al. Full scale experimental characterisation for riveted joint design[J]. Aerospace Science & Technology, 2002, 6(5):333-342.
[17] LANGRAND B, DELETOMBE E, MARKIEWICZ E, et al. Numerical approach for assessment of dynamic strength for riveted joints[J]. Aerospace Science & Technology, 1999, 3(7):431-446.
[18] LANGRAND B, DELETOMBE E, MARKIEWICZ E, et al. Riveted joint modeling for numerical analysis of airframe crashworthiness[J]. Finite Elements in Analysis & Design, 2001, 38(1):21-44.
[19] ANDRIEUX F, SUN D Z, RIEDEL H. Development and application of a micromechanical model for description of the growth and coalescence of spheroidal voids[C]//4th International Forum on Advanced Material Science and Technology, 2014.
[20] SOMMER S. Modeling of the fracture behavior of spot welds using advanced micro-mechanical damage models[J]. Materials Science and Engineering, 2010,10(1):012057.
[21] HANSSEN A G, OLOVSSON L, PORCARO R, et al. A large-scale finite element point-connector model for self-piercing rivet connections[J]. European Journal of Mechanics-A/Solids, 2010, 29(4):484-495.
[22] HUANG L, MORAES J F C, SEDIAKO D, et al. Finite element and residual stress and analysis of self-pierce riveting in dissimilar metal sheets[J]. Journal of Manufacturing Science & Engineering, 2017, 139(2):021007.
[23] 张旭. 电磁铆接过程铆钉动态塑性变形行为及组织性能研究[D]. 哈尔滨:哈尔滨工业大学, 2016. ZHANG X. Research on dynamic plastic deformation behavior and microstructure and mechanical properties of rivets in elec-tromagnetic riveting[D]. Harbin:Harbin Institute of Technology, 2016(in Chinese).
[24] 《航空制造工程手册》总编委会. 航空制造工程手册[M]. 北京:航空工业出版社, 1997. Aviation Manufacturing Engineering Manual Editorial Board. Aviation manufacturing engineering manual[M]. Beijing:Aviation Industry Press, 1997(in Chinese).
[25] KOLSKY H. An investigation of the mechanical properties of materials at very high rates of loading[J]. Proceedings of the Physical Society B, 1949, 62(11):676.
[26] 张盛, 李新文, 杨向浩. 线性增加冲击荷载作用下圆盘试样的动态应力平衡[J]. 中国有色金属学报, 2014, 24(1):75-81. ZHANG S, LI X W, YANG X H. Dynamic stress equilibrium of disc specimen under linear increase impact loading[J]. The Chinese Journal of Nonferrous Metals, 2014, 24(1):75-81(in Chinese).

Impact responses of aeronautic riveting structures

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Fangyi SHENG, Guolin YANG, Fantong MENG, Zhigang DONG, Renke KANG. Finite element simulation analysis in helical milling of countersunk hole [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(1): 428690-428690.
[2]	Haolei MOU, Jiang XIE, Zhenyu FENG, Kun CHENG, Yi LIU. Crashworthiness characteristics analysis of typical fuselage section of large transport aircraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 227512-227512.
[3]	Zhiqiang ZHANG, Ziming YU, Tiangang ZHANG, Qian YANG, Hao WANG. Microstructure of TiC _x reinforced Ti-based composite coating prepared by laser cladding and first principle study on reinforced phase [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(8): 427294-427294.
[4]	Liping LIU, Yuyang QI, Yueguo LIN, Rui BAO, Jianxin XU, Zhenyu FENG, Guanghui QING. Tensile failure of carbon fiber composite material bonded-rivet hybrid repaired structure [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 428676-428676.
[5]	Tianchun ZOU, Yuezhang JU, Yuxi GUAN, Zegang LI, Hongcheng CHEN. Effect of stacking sequence on fatigue behavior of CFRP⁃Al joint [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(18): 428264-428264.
[6]	Jiangbo CHEN, Kai ZENG, Baoying XING, Hongshen ZHANG, Yanfang DING, Xiaocong HE. Aluminum alloy clinch-bonding with hot melt adhesive film and joint failure analysis [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 428029-428029.
[7]	LIU Zengfei, LIU Kai, ZHANG Binbin, LI Xuefeng, GE Jingran, HUANG Jian, LI Chao, SUN Xinyang, SUN Yu, LIANG Jun. Effect of yarn size on tensile properties of 3D woven composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 525453-525453.
[8]	ZHAO Tian, LI Ying, ZHANG Chao, YAO Liaojun, HUANG Yixing, HUANG Zhixin, CHEN cheng, WANG Wandong, ZU Lei, ZHOU Huamin, QIU Jinhao, QIU Zhiping, FANG Daining. Fundamental mechanical problems in high-performance aerospace composite structures: State-of-art review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526851-526851.
[9]	FENG Zhenyu, CHI Qilin, CUI Huaitian, XIE Jiang, MU Haolei. Comparison of ballistic impact behaviors between plain woven and 2.5D woven fabric composite plates [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 425116-425116.
[10]	ZHAO Kehan, LIU Duo, ZHU Haitao, CHEN Bin, HU Shengpeng, SONG Xiaoguo. Effect of brazing temperature on microstructure and mechanical property of C/C/AgCuTi+C_f/TC4 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525007-525007.
[11]	WANG Miao, WANG Wei, YANG Yunlong, TAN Caiwang, WANG Gang. Effect of brazing time on microstructure and properties of SiC ceramic brazed with CoFeNiCrCu [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525057-525057.
[12]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.
[13]	LI Xiaopeng, HAN Rui, QIAN Xusheng, ZHANG Binggang, WANG Kehong. Effect of adding boron element on microstructure and shear strength of Ni-25at%Si/Ti600 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625069-625069.
[14]	YANG Bingxin, MA Yunwu, SHAN He, YANG Tianhao, SUN Jing, LI Yongbing. Mechanical performance of friction self-piercing riveted joint for 2A12-T4 aluminum alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625111-625111.
[15]	LU Chuanyang, CHEN Gangqiang, TANG Xiatao, HE Yanming, YANG Jianguo, ZHENG Wenjian, MA Yinghe, LI Huaxin, GAO Zengliang. Microstructure and mechanical properties of Hastelloy N superalloy joints brazed using BNi71CrSi filler alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625040-625040.