一种用于机载设备的高精度转动型柔性铰链

doi:10.7527/S1000-6893.2013.0108

Abstract

Abstract:

Current joints used for airborne equipment suffer from problems of friction, wear, and thermal gradients. Flexure pivots, on the other hand, achieve their motion by the deflection of their flexible members, so the performance increases and the cost reduces. At present, the cross-spring pivot cannot satisfy the positioning requirements for some ultra-precision airborne equipment. Consequently, the intersection point is generalized to arbitrary position in order to improve the performance. Firstly, considering the mechanical interface, a model for the generalized cross-spring pivot is developed. The relationships between stiffness/accuracy and design parameters are analyzed, and the influence is evaluated of two different length leaves resulting from manufacturing errors on its performance. Therefore, a flexure pivot with constant stiffness or small center shift is obtained. Furthermore, the characteristics revealed by the analysis model are verified by finite element analysis (FEA). Finally, taking the advantage of building block method, a complex flexure pivot with higher precision is proposed. When the rotational angle is up to 15° and a vertical load is applied, the center shift of the complex flexure pivot is less than 3 μm, and its precision is even better than the butterfly pivot, which is extensively utilized abroad.

Key words: flexure pivot, stiffness, center shift, precision machine, airborne equipment

CLC Number:

LIU Chengping, ZHAO Hongzhe, BI Shusheng, XU Yi. A Precise Rotational Flexure Pivot for Airborne Equipment[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, doi: 10.7527/S1000-6893.2013.0108.

References

[1] Howell L L. Compliant mechanisms. New York: Johm Wiley & Sons, Inc., 2001: 136-162.

[2] Smith S T. Flexures: elements of elastic mechanisms. New York: Gordon and Breach Science Publishers, 2000: 193-198.

[3] Henein S, Spanoudakis P, Droz S, et al. Flexure pivot for aerospace mechanisms. Proceedings of 10th European Space Mechanisms and Tribology Symposium. 2003:1-4.

[4] Huang J, Ge W J, Yang F. Topology optimization of the compliant mechanism for shape change of airfoil leading edge. Acta Aeronautica et Astronautica Sinica, 2007, 28(4): 988-992. (in Chinese) 黄杰, 葛文杰, 杨方. 实现机翼前缘形状连续变化柔性机构的拓扑优化. 航空学报, 2007, 28(4): 988-992.

[5] Zago L, Mayor J M, Droz S, et al. High-accuracy hexapods for the alignment of secondary mirrors of advanced astronomical telescopes. Neuchatel: CSEM, 2004.

[6] Li H X, Ding Y L, Hui S W, et al. Design of compliance factor experiment setup for single-axis flexure hinge. Optics and Precision Engineering, 2011, 19(7): 1552-1559. (in Chinese) 李海星, 丁亚林, 惠守文, 等. 单轴柔性铰链柔度系数试验装置的设计. 光学精密工程, 2011, 19(7): 1552-1559.

[7] Chen G M, Han Q. Deep-notch elliptical flexure hinges. Optics and Precision Engineering, 2009, 17(3): 570-575. (in Chinese) 陈贵敏, 韩琪. 深切口椭圆柔性铰链. 光学精密工程, 2009, 17(3): 570-575.

[8] Hu J F, Zhang X M. Active vibration control and its simulation of a novel 2-DOF flexible parallel manipulator. China Mechanical Engineering, 2010, 21(17): 2017-2020. (in Chinese) 胡俊峰, 张宪民. 一种新型两自由度柔性并联机械手的主动振动控制及其仿真. 中国机械工程, 2010, 21(17): 2017-2020.

[9] Trease B P, Moon Y M, Kota S. Design of large-displacement compliant joints. ASME Journal of Mechanical Design, 2005, 127(4): 788-798.

[10] Fowler R M, Howell L L, Magleby S P. Compliant space mechanisms: a new frontier for compliant mechanisms. Mechanical Sciences, 2011, 2(2): 205-215.

[11] Zelenika S, DeBona F. Analytical and experimental characterisation of high-precision flexural pivots subjected to lateral load. Precision Engineering, 2002, 26(4): 381-388.

[12] Jensen B D, Howell L L. The modeling of cross-axis flexural pivots. Mechanism and Machine Theory, 2002, 37(5): 461-476.

[13] Riverhawk Company. Flexural pivot catalog. 2004:1-6.

[14] Wittrick W H. The properties of crossed flexural pivots and the influence of the point at which the strips cross. The Aeronautical Quarterly, 1951, 2: 272-292.

[15] Awtar S, Slocum A H, Sevincer E. Characteristics of beam-based flexure modules. Journal of Mechanical Design, 2007, 129(6): 625-639.

A Precise Rotational Flexure Pivot for Airborne Equipment

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Fanmin MENG, Nuo MA, Wenchao MA, Junhui MENG, Wenguang LI. Wet modal analysis and tests for inflatable wing with swept air-beams [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(2): 227098-227098.
[2]	WANG Bo, GAO Peixin, MA Hui, SUN Wei, LIN Junzhe, LI Hui, HAN Qingkai, LIU Zhonghua. Dynamic characteristics of aero-engine pipeline system: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 25332-025332.
[3]	YUE Bo, XU Yingjie, XU Ningxin, ZHANG Weihong. Topology optimization of frame mold for autoclave process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425141-425141.
[4]	GAO Zhongxin, WANG Xiaoguang, WU Jun, LIN Qi. Hybrid force/pose control of wire-driven parallel suspension system based on stiffness optimization [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 324373-324373.
[5]	MA Yanhong, NI Yaoyu, CHEN Xueqi, DENG Wangqun, YANG Hai. Bending stiffness loss of rod-rabbet joints and its effect on vibration response of rotor systems [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 223861-223861.
[6]	LI Kangkang, CHEN Weiwei. Variable stiffness design of flapping wings and its effects on lift and thrust [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 423785-423785.
[7]	TANG Xiaofeng, HE Zhenwei, CHANG Hongzhen, SHI Xiaoming, PAN Qiang, TANG Guoan. Thermo-modal test on an axle bearing supported rudder and identification of its supporting stiffness [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 222617-222617.
[8]	TENG Xiaoyan, FENG Guobao, JIANG Xudong, ZHAO Hetao. Analytical model of high-frequency energy flow response for a beam with free layer damping [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(4): 222616-222616.
[9]	WU Huisong, LIN Qi, PENG Miaojiao, LIU Ting, JI Yangfeng, WANG Xiaoguang. Wire-driven parallel suspension mechanism for aircraft model of formation flight in low-speed wind tunnel [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(11): 123144-123144.
[10]	LI Qiang, DONG Guangxu, ZHANG Xinong, LUO Yajun, ZHANG Yahong, XIE Shilin. Design and parameter optimization of a new tunable dynamic vibration absorber [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(6): 221721-221721.
[11]	OUYANG Xiaosui, LIU Yi. Panel flutter of variable stiffness composite laminates in supersonic flow [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(3): 221539-221539.
[12]	PENG Xiao, SHU Zhan, DU Tao, XU Qiang. Peel simulating and test verification of prepreg based on laying process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(12): 422246-422246.
[13]	WU Jing, HU Guocai, LIU Quan, LIU Xiangyi. Optimal design for landing gear stiffness and damping based on helicopter ground resonance requirements [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(12): 222027-222027.
[14]	LIU Yongquan, XIAO Sen, HONG Jie, MA Yanhong. Excitation characteristic and dynamic response of misalignment of flexible rotor system with three supportings [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(3): 220470-220470.
[15]	LIU Kai, CAO Yi, ZHOU Rui, GE Shuyi, DING Rui. Analysis and optimization of two-degree of freedom LEMs flexure hinge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(2): 420317-420326.