考虑吸气影响的层流翼型梯度优化设计

doi:10.7527/S1000-6893.2022.27323

论文

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

考虑吸气影响的层流翼型梯度优化设计

王一雯¹, 兰夏毓², 史亚云³, 华俊⁴, 白俊强¹, 周铸⁵

1. 西北工业大学无人系统技术研究院, 西安 710072;
2. 西北工业大学航空学院, 西安 710072;
3. 西安交通大学航天航空学院, 西安 710049;
4. 中国航空研究院, 北京 100012;
5. 中国空气动力研究与发展中心计算空气动力研究所, 绵阳 621000

收稿日期:2022-04-26 修回日期:2022-07-05 出版日期:2022-11-15 发布日期:2022-07-14
通讯作者: 史亚云,E-mail:yayunshi@xjtu.edu.cn E-mail:yayunshi@xjtu.edu.cn
基金资助:
中国博士后科学基金（2021M692569）

Gradient optimization design for laminar airfoil considering inspiration effect

WANG Yiwen¹, LAN Xiayu², SHI Yayun³, HUA Jun⁴, BAI Junqiang¹, ZHOU Zhu⁵

1. Unmanned System Research Institute, Northwestern Polytechnical University, Xi'an 710072, China;
2. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
3. School of Aerospace, Xi'an Jiaotong University, Xi'an 710049, China;
4. Chinese Aeronautical Establishment, Beijing 100012, China;
5. Computational Aerodynamic Research Institute, China Aerodynamics Research and Development, Mianyang 621000, China

Received:2022-04-26 Revised:2022-07-05 Online:2022-11-15 Published:2022-07-14
Supported by:
China Postdoctoral Science Foundation (2021M692569)

摘要/Abstract

摘要： 针对层流翼优化设计问题，推导考虑吸气影响的层流-湍流转捩耦合伴随方程，并结合链式求导法则、自动微分技术及CK （Coupled Krylov）算法实现耦合伴随方程的高效求解，构建基于离散伴随理论的混合层流（HLF）翼梯度优化设计系统。转捩预测采用基于扰动放大因子模型（AFM）的e^N方法。层流飞行试验结果表明，基于AFM的转捩预测方法能够有效捕捉吸气控制影响下T-S （Tollmien-Schlichting）扰动波失稳诱导的转捩现象。利用构建的梯度优化系统开展层流翼型多点设计，并与非梯度优化方法的优化结果进行对比。自然层流设计结果对比显示，不同优化方法得到的设计结果呈现出较强的一致性。混合层流翼型多点设计结果显示，混合层流优化具有比自然层流优化更强的减阻能力。相比于自然层流优化翼型，混合层流优化翼型分别减阻6.1%、5.9%、33.3%、9.5%。本文构建的基于离散伴随的层流翼梯度优化方法能使混合层流机翼的气动性能得到大幅提升，可为未来混合层流机翼减阻设计提供方法支撑。

关键词: 自然层流, 混合层流, 离散伴随, 梯度优化, 气动设计

Abstract: The coupled adjoint equation of laminar-turbulent transition considering the suction control effect is derived for the aerodynamic design of Hybrid Laminar Flow Control (HLFC) airfoils. The chain rule, automatic differentiation algorithm, and CK (Coupled Krylov) algorithms are used to accurately and efficiently solve the coupled adjoint equations. Finally, the gradient-based optimization framework, based on the discrete adjoint equations, for HLFC airfoil is constructed. The transition prediction model adopts the e^N method based on the Amplification Factor Model (AFM). The laminar flight test results show that the transition prediction method based on the AFM can effectively capture the transition phenomenon induced by T-S (Tollmien-Schlichting) waves instability under the influence of suction control. The multi-point design of the laminar airfoil is carried out using the gradient-based optimization framework, and comparison of the results with those of the gradient-free optimization. The comparison of natural laminar flow design results show that the gradient-free optimization has a deformation trend similar to the gradient-free optimization. The results of multi-point design of the hybrid laminar flow airfoil show that the hybrid laminar flow optimization has stronger drag reduction ability than the natural laminar flow optimization. Compared with that of the natural laminar airfoil, the total drag of the hybrid laminar airfoil is reduced by 6.1%, 5.9%, 33.3%, 9.5%, respectively. In conclusion, the gradient-based optimization method based on the discrete adjoint equations can effectively improve the aerodynamic performance of the HLFC airfoil, thereby providing methodological support for the future drag reduction design of HLFC.

Key words: natural laminar flow, hybrid laminar flow control, discrete adjoint equations, gradient-based optimization, aerodynamic design

中图分类号:

V224

王一雯, 兰夏毓, 史亚云, 华俊, 白俊强, 周铸. 考虑吸气影响的层流翼型梯度优化设计[J]. 航空学报, 2022, 43(11): 527323-527323.

WANG Yiwen, LAN Xiayu, SHI Yayun, HUA Jun, BAI Junqiang, ZHOU Zhu. Gradient optimization design for laminar airfoil considering inspiration effect[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 527323-527323.

参考文献

[1] AGARWAL R. Environmentally responsible air and ground transportation[C]//49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston:AIAA, 2011.
[2] DI SANTE R. Fibre optic sensors for structural health monitoring of aircraft composite structures:Recent advances and applications[J]. Sensors, 2015, 15(8):18666-18713.
[3] GOHARDANI A S, DOULGERIS G, SINGH R. Challenges of future aircraft propulsion:A review of distributed propulsion technology and its potential application for the all electric commercial aircraft[J]. Progress in Aerospace Sciences, 2011, 47(5):369-391.
[4] KAWAI R, FRIEDMAN D, SERRANO L. Blended wing body (BWB) boundary layer ingestion (BLI) inlet configuration and system studies:NASA/CR-2006-214534[R]. Washington D.C.:NASA, 2013.
[5] DRELA M. Development of the D8 transport configuration[C]//29th AIAA Applied Aerodynamics Conference. Reston:AIAA, 2011.
[6] GUR O, BHATIA M, SCHETZ J A, et al. Design optimization of a truss-braced-wing transonic transport aircraft[J]. Journal of Aircraft, 2010, 47(6):1907-1917.
[7] VERMEERSCH O, YOSHIDA K, UEDA Y, et al. Natural laminar flow wing for supersonic conditions:Wind tunnel experiments, flight test and stability computations[J]. Progress in Aerospace Sciences, 2015, 79:64-91.
[8] RONALD D. Overview of laminar flow control:NASA/TP-1998-208705[R]. Washington D.C.:NASA, 1998.
[9] STREIT T, HORSTMANN K, SCHRAUF G, et al. Complementary numerical and experimental data analysis of the ETW telfona pathfinder wing transition tests[C]//49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. Reston:AIAA, 2011.
[10] KRISHNAN K S G, BERTRAM O, SEIBEL O. Review of hybrid laminar flow control systems[J]. Progress in Aerospace Sciences, 2017, 93:24-52.
[11] COLLIER J F Jr. An overview of recent subsonic laminar flow control flight experi-ments[C]//23rd Fluid Dynamics, Plasmadynamics, and Lasers Conference. Reston:AIAA, 1993.
[12] HENKE R. "A 320 HLF Fin" flight tests completed[J]. Air & Space Europe, 1999, 1(2):76-79.
[13] 陈静, 宋文萍, 朱震, 等. 跨声速层流翼型的混合反设计/优化设计方法[J]. 航空学报, 2018, 39(12):122219. CHEN J, SONG W P, ZHU Z,et al. A hybrid inverse/direct optimization design method for transonic laminar flow airfoil[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(12):122219(in Chinese).
[14] 杨体浩, 白俊强, 史亚云, 等. 考虑吸气分布影响的HLFC机翼优化设计[J]. 航空学报, 2017, 38(12):121158. YANG T H, BAI J Q, SHI Y Y,et al. Optimization design for HLFC wings considering influence of suction distribution[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(12):121158(in Chinese).
[15] 史亚云, 郭斌, 刘倩, 等. 基于能量观点的混合层流优化设计[J]. 北京航空航天大学学报, 2019, 45(6):1162-1174. SHI Y Y, GUO B, LIU Q,et al. Hybrid laminar flow optimization design from energy view[J]. Journal of Beijing University of Aeronautics and Astronautics, 2019, 45(6):1162-1174(in Chinese).
[16] HAN Z H, ZHANG Y, SONG C X, et al. Weighted gradient-enhanced Kriging for high-dimensional surrogate modeling and design optimization[J]. AIAA Journal, 2017, 55(12):4330-4346.
[17] LYU Z J, MARTINS J R R A. Aerodynamic design optimization studies of a blended-wing-body aircraft[J]. Journal of Aircraft, 2014, 51(5):1604-1617.
[18] HE P, MADER C A, MARTINS J R R A, et al. DAFoam:An open-source adjoint framework for multidisciplinary design optimization with OpenFOAM[J]. AIAA Journal, 2020, 58(3):1304-1319.
[19] DRIVER J, ZINGG D W. Numerical aerodynamic optimization incorporating laminar-turbulent transition prediction[J]. AIAA Journal, 2007, 45(8):1810-1818.
[20] RASHAD R, ZINGG D W. Aerodynamic shape optimization for natural laminar flow using a discrete-adjoint approach[J]. AIAA Journal, 2016, 54(11):3321-3337.
[21] SHI Y Y, MADER C A, HE S C, et al. Natural laminar-flow airfoil optimization design using a discrete adjoint approach[J]. AIAA Journal, 2020, 58(11):4702-4722.
[22] SHI Y Y, MADER C A, MARTINS J R R A. Natural laminar flow wing optimization using a discrete adjoint approach[J]. Structural and Multidisciplinary Optimization, 2021, 64(2):541-562.
[23] 史亚云. 基于离散伴随的层流翼优化设计方法及应用研究[D]. 西安:西北工业大学, 2019. SHI Y Y. Discrete adjoint-based optimization methodology and applied research for laminar flow wing[D]. Xi'an:Northwestern Polytechnical University, 2019(in Chinese).
[24] KAYA H, TUNCER I·H. Discrete adjoint-based aerodynamic shape optimization framework for natural laminar flows[J]. AIAA Journal, 2022, 60(1):197-212.
[25] CEBECI T, KAUPS K, RAMSEY J. A general method for calculating three-dimensional compressible laminar and turbulent boundary layers on arbitrary wings:NASA-CR-2777[R]. Washington D.C.:NASA, 1977.
[26] SHI Y Y, MADER C A, HE S C, et al. Natural laminar-flow airfoil optimization design using a discrete adjoint approach[J]. AIAA Journal, 2020, 58(11):4702-4722.
[27] GLEYZES C, COUSTEIX J, BONNET J L. A calculation method of leading-edge separation bubbles[M].Numerical and Physical Aspects of Aerodynamic Flows II. Berlin:Springer, 1984:173-192.
[28] DRELA M, GILES M B. Viscous-inviscid analysis of transonic and low Reynolds number airfoils[J]. AIAA Journal, 1987, 25(10):1347-1355.
[29] SHI Y Y, CAO T S, YANG T H, et al. Correction:Estimation and analysis of hybrid laminar flow control on a transonic experiment[J]. AIAA Journal, 2020, 58(1):118-132.
[30] WONG P, MAINA M. Flow control studies for military aircraft applications[C]//2nd AIAA Flow Control Conference. Reston:AIAA, 2004.
[31] YANG T H, CHEN Y F, SHI Y Y, et al. Stochastic investigation on the robustness of laminar-flow wings for flight tests[J]. AIAA Journal, 2022, 60(4):2266-2286.
[32] YANG T H, ZHONG H, CHEN Y F, et al. Transition prediction and sensitivity analysis for a natural laminar flow wing glove flight experiment[J]. Chinese Journal of Aeronautics, 2021, 34(8):34-47.
[33] FUJINO M, YOSHIZAKI Y, KAWAMURA Y. Natural-laminar-flow airfoil development for a lightweight business jet[J]. Journal of Aircraft, 2003, 40(4):609-615.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

考虑吸气影响的层流翼型梯度优化设计

Gradient optimization design for laminar airfoil considering inspiration effect

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李广佳, 王红波, 张凯, 仪志胜. 临近空间太阳能无人机增升减阻技术综述[J]. 航空学报, 2024, 45(5): 529644-529644.
[2]	杨晓飞, 孙太璐, 孟德君, 尹海宝, 王咏梅. 兼顾多模式的核心机驱动风扇级气动设计方法[J]. 航空学报, 2024, 45(2): 128625-128625.
[3]	陈艺夫, 马宇航, 蓝庆生, 孙卫平, 史亚云, 杨体浩, 白俊强. 基于多项式混沌法的翼型不确定性分析及梯度优化设计[J]. 航空学报, 2023, 44(8): 127446-127446.
[4]	李春鹏, 钱战森, 孙侠生. 远程民机变弯度机翼后缘外形变形矩阵气动设计[J]. 航空学报, 2023, 44(7): 127335-127335.
[5]	曹文博, 刘溢浪, 张伟伟. 基于降阶模型和梯度优化的流场加速收敛方法[J]. 航空学报, 2023, 44(6): 127090-127090.
[6]	刘红阳, 宋超, 罗骁, 周铸, 吕广亮. 考虑三维流动效应的自然层流短舱压力分布反设计[J]. 航空学报, 2023, 44(5): 126862-126862.
[7]	刘超宇, 屈峰, 孙迪, 刘传振, 钱战森, 白俊强. 基于离散伴随的高超声速密切锥乘波体气动优化设计[J]. 航空学报, 2023, 44(4): 126664-126664.
[8]	张旭辉, 解春雷, 刘思佳, 闫溟, 邢思远. 智能变形飞行器发展需求及难点分析[J]. 航空学报, 2023, 44(21): 529302-529302.
[9]	王晓峰, 屈峰, 付俊杰, 王泽宇, 刘超宇, 白俊强. 基于离散伴随的高超内转式进气道气动优化设计[J]. 航空学报, 2023, 44(19): 128352-128352.
[10]	李昊歌, 杨华, 杨雨欣, 陈伟芳. 高超声速升力体迎风面精细化降热优化设计[J]. 航空学报, 2022, 43(S2): 124-137.
[11]	梁宽, 付莉莉, 张晓鹏, 罗阳军. 基于材料场级数展开的结构动力学拓扑优化[J]. 航空学报, 2022, 43(9): 226002-226002.
[12]	杨体浩, 王一雯, 王雨桐, 史亚云, 周铸. 基于离散伴随的层流翼优化设计方法[J]. 航空学报, 2022, 43(12): 126132-126132.
[13]	姜丽红, 饶寒月, 兰夏毓, 杨体浩, 耿建中, 白俊强. 混合层流机翼气动设计与综合收益影响[J]. 航空学报, 2022, 43(11): 526791-526791.
[14]	周桢尧, 吕飞, 周斌, 杨钊. 自然层流减阻验证方法及验证翼段布局设计[J]. 航空学报, 2022, 43(11): 526751-526751.
[15]	聂晗, 宋文萍, 韩忠华, 陈坚强, 段茂昌, 万兵兵. 面向超声速民机层流机翼设计的转捩预测方法[J]. 航空学报, 2022, 43(11): 526342-526342.