大型客机信息化研制支撑体系架构研究

doi:10.7527/S1000-6893.2018.22736

总设计师论述

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

大型客机信息化研制支撑体系架构研究

吴光辉^1,2, 陈子坤¹, 田永亮¹

1. 北京航空航天大学航空科学与工程学院, 北京 100083;
2. 中国商用飞机有限责任公司, 上海 200210

收稿日期:2018-10-18 修回日期:2018-11-02 出版日期:2019-01-15 发布日期:2018-11-16
通讯作者: 田永亮 E-mail:tianyongliang_buaa@163.com

Architecture of informatization support systems for development of large airliners

WU Guanghui^1,2, CHEN Zikun¹, TIAN Yongliang¹

1. School of Aeronautic Science and Engineering, Beihang University, Beijing 100083, China;
2. Commercial Aircraft Corporation of China Ltd., Shanghai 200210, China

Received:2018-10-18 Revised:2018-11-02 Online:2019-01-15 Published:2018-11-16

摘要/Abstract

摘要： 大型客机的研制具有复杂程度高、技术难度大、协作范围广等特点，随着研制要求的不断提高与研制范围的不断扩大，传统研制模式已经发生重大转变，需要将信息化技术融入大型客机研制过程，以提高大型客机的研制质量和效率。本文提出了大型客机信息化研制支撑体系的基本概念以及总体架构，包括业务应用平台、数据管理平台、基础技术平台，并通过产品生命周期、管理业务流程、产业价值链3个方面的应用管理，可实现对大型客机研制过程的有效支撑。经过实际型号工程研制的验证，该体系能够支撑大型客机研制的全过程，大幅度地提高研制质量、缩短研制周期、降低研制成本。

关键词: 大型客机, 研制过程, 信息化技术, 支撑体系, 架构

Abstract: The development of large airliners is characterized by high complexity, big technical difficulty and wide range of cooperation. With the continuously rising development requirements and the continuous expansion of cooperation scope, the traditional development model has undergone a major transformation. Therefore, it is necessary to integrate the informational technology with the development process improving the quality and efficiency of the development of large airliners. The basic concept and overall architecture of the large airliners informatization development support systems are proposed, including business application platform, data management platform, and basic technology platform. Through the application management of product life cycle, management business process, and industrial value chain, the effective support for the development of large airliners can be realized. The verification of the actual engineering development shows that the systems can support the whole process of large airliners development, greatly improving its quality, shortening its cycle and reducing its cost.

Key words: large airliners, development process, information technology, support systems, architecture

中图分类号:

V221
V37

吴光辉, 陈子坤, 田永亮. 大型客机信息化研制支撑体系架构研究[J]. 航空学报, 2019, 40(1): 522736-522736.

WU Guanghui, CHEN Zikun, TIAN Yongliang. Architecture of informatization support systems for development of large airliners[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522736-522736.

参考文献

[1] 王波. 制造企业信息化需求分析框架与方法研究[J]. 中国信息化, 2018(8):85-87. WANG B. Research on analysis framework and method of manufacturing enterprise informationization requirement[J]. Informatization Research, 2018(8):85-87(in Chinese).
[2] 宁振波. 飞机制造业信息化技术应用与发展[J]. 航空精密制造技术, 2009, 45(1):16-19. NING Z B. Application and development of information technology in aircraft manufacturing industry[J]. Aviation Precision Manufacturing Technology, 2009, 45(1):16-19(in Chinese).
[3] 于勇, 陶剑, 范玉青. 大型飞机数字化设计制造技术应用综述[J]. 航空制造技术, 2009(11):56-60. YU Y, TAO J, FAN Y Q. Summarization of large commercial jet digital design and manufacturing technology application[J]. Aeronautical Manufacturing Technology, 2009(11):56-60(in Chinese).
[4] 陈金兰, 刘海滨. PLM助波音787飞机项目实现全球化虚拟生产[J]. 军民两用技术与产品, 2008(9):37-38. CHEN J L, LIU H B. Realizing global virtual production in Boeing 787 project through PLM[J]. Dual Use Technologies & Products, 2008(9):37-38(in Chinese).
[5] 刘冰. 民用飞机型号信息化规划方法研究[J]. 航空科学技术, 2014, 25(8):74-78. LIU B. Research of information planning method on civil aircraft[J]. Aeronautical Science & Technology, 2014, 25(8):74-78(in Chinese).
[6] 李荣耀, 李蒙. 国内科研院所类企业信息化规划方法与思路[J]. 制造业自动化, 2013, 35(22):94-96. LI R Y, LI M. Thinking and methods of IT strategy planning for scientific research institutions[J]. Manufacturing Automation, 2013, 35(22):94-96(in Chinese).
[7] 梁可. 数字化协同制造平台在C919研制过程中的应用研究[D]. 哈尔滨:哈尔滨工业大学, 2016:4-10. LIANG K. Research on the application of digital collaborative manufacturing platform in the development of C919[D]. Harbin:Harbin Institute of Technology, 2016:4-10(in Chinese).
[8] 管林, 小城. 管林航空信息化技术专家[J]. 航空制造技术, 2013(18):32-33. GUAN L, XIAO C. Guan lin aviation information technology expert[J]. Aeronautical Manufacturing Technology, 2013(18):32-33(in Chinese).
[9] 王钢林, 刘洋辉, 罗明强. 大型客机总体设计系统的框架与原型研究[J]. 飞机设计, 2015, 35(4):14-22. WANG G L, LIU Y H, LUO M Q. Research on open framework and prototype system for civil aircraft conceptual design[J]. Aircraft Design, 2015, 35(4):14-22(in Chinese).
[10] 陈振, 丁晓, 唐健钧, 等. 基于数字孪生的飞机装配车间生产管控模式探索[J]. 航空制造技术, 2018, 61(12):46-50. CHEN Z, DING X, TANG J J, et al. Digital twin-based production management and control mode for aircraft assembly shop-floor[J]. Aeronautical Manufacturing Technology, 2018, 61(12):46-50(in Chinese).
[11] 孙雪, 马静华. 飞机全生命周期的大数据[J]. 大飞机, 2017(11):18-21. SUN X, MA J H. Big data for the aircraft entire life cycle[J]. Jetlines, 2017(11):18-21(in Chinese).
[12] 邢作纯. 某航空企业信息化管理实践与探索[J]. 信息与电脑(理论版), 2018(4):188-189. XING Z C. Practice and exploration of information management in an aviation enterprise[J]. China Computer & Communication, 2018(4):188-189(in Chinese).
[13] 宋利康. 航空企业管理中数字化驱动技术研究与应用[D]. 南京:南京航空航天大学, 2007:15-17. SONG L K. Study and application of digital driven technology in aviation enterprise management[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2007:15-17(in Chinese).
[14] 张亚豪, 李晓华. 复杂产品系统产业全球价值链的升级路径:以大飞机产业为例[J]. 改革, 2018(5):76-86. ZHANG Y H, LI X H. Upgrading path of complex product system industry in global value chain:Taking big airplane industry as an example[J]. Reform, 2018(5):76-86(in Chinese).
[15] 王翯华, 张瑜. 大型客机主-供模式协同研制初创期的特征分析[J]. 物流工程与管理, 2018, 40(7):120-124. WANG H H, ZHANG Y. Property comprehensive evaluation on coordination development of large aircraft main manufacture-vendor model of start-up period[J]. Logistics Engineering and Management, 2018, 40(7):120-124(in Chinese).
[16] TANG C S, ZIMMERMAN J D, NELSON J I. Managing new product development and supply chain risks:The Boeing 787 case[J]. Supply Chain Forum An International Journal, 2009, 10(2):74-86.
[17] TCHOFFA D, FIGAY N, GHODOUS P, et al. Digital factory system for dynamic manufacturing network supporting networked collaborative product development[J]. Data & Knowledge Engineering, 2016, 105:130-154.
[18] VIPAVETZ K, MURPHY D, INFELD S. Model-based systems engineering pilot program at NASA Langley[C]//AIAA Space 2012 Conference & Exposition. Reston, VA:AIAA, 2012.
[19] UCKUN S, KURTOGLU T, FRITZ C, et al. META Ⅱ:Formal co-verification of correctness of large-scale cyber-physical systems during design. Volume 1[R]. Palo Alto, CA:Palo Alto Research Center, 2011.
[20] 周兵. 支持MBSE的企业信息管理系统发展与启示[J]. 电讯技术, 2018, 58(7):852-858. ZHOU B. Enterprise information management system supporting MBSE:Development and inspiration[J]. Telecommunication Engineering, 2018, 58(7):852-858(in Chinese).
[21] 赵群, 张翔, 杜呈信. 基于物联网时代的我国制造业信息化发展趋势[J]. 机械制造, 2012, 50(4):1-5. ZHAO Q, ZHANG X, DU C X. The development trend of China's manufacturing industry informatization based on the Internet of Things (IOT) era[J]. Machinery, 2012, 50(4):1-5(in Chinese).
[22] 贾晨曦, 王林峰. 国内基于模型的系统工程面临的挑战及发展建议[J]. 系统科学学报, 2016, 24(4):100-104. JIA C X, WANG L F. Challenges and development suggestions of the model based systems engineering in China[J]. Journal of Systems Science, 2016, 24(4):100-104(in Chinese).
[23] 李辉. 探究基于单一数据源飞机产品的全生命周期数据管理[J]. 科技传播, 2017, 9(9):54-55. LI H. Explore aircraft products lifecycle data management based on single data source[J]. Public Communication of Science & Technology, 2017, 9(9):54-55(in Chinese).
[24] 周永, 罗小琦, 李荣强, 等. 面向全生命周期的飞机产品数据架构技术[J]. 航空学报, 2016, 37(1):324-334. ZHOU Y, LUO X Q, LI R Q, et al. Technology of lifecycle oriented aircraft product data architecture[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(1):324-334(in Chinese).
[25] 程永波, 陈洪转, 何利芳, 等. 复杂装备主制造商-供应商主从合作激励协调Stackelberg模型[J]. 中国管理科学, 2016, 24(1):91-96. CHENG Y B, CHEN H Z, HE L F, et al. The Stackelberg model of optimal incentive cooperation between main manufacturer and suppliers of complex equipment[J]. Chinese Journal of Management Science, 2016, 24(1):91-96(in Chinese).
[26] LEMKE F, SZWEJCZEWSKI M, GOFFIN K. Manufacturer-supplier relationships:An empirical study of German manufacturing companies[J]. International Journal of Operations & Production Management, 2005, 25(9):875-897.
[27] 李海涛. 并行工程在商用飞机研制中的应用[J]. 民用飞机设计与研究, 2017(1):99-105. LI H T. Application of concurrent engineering in commercial aircraft development[J]. Civil Aircraft Design & Research, 2017(1):99-105(in Chinese).
[28] 贺东风, 赵越让, 钱仲焱, 等. 中国商用飞机有限责任公司系统工程手册[M]. 上海:上海交通大学出版社, 2017:260-276. HE D F, ZHAO Y R, QIAN Z Y, et al. COMAC system engineering manual[M]. Shanghai:Shanghai Jiao Tong University Press, 2017:260-276(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

大型客机信息化研制支撑体系架构研究

Architecture of informatization support systems for development of large airliners

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	周贵荣, 徐见源, 马少博, 宗军耀, 沈金清, 朱海杰. 大型客机航电系统综合集成关键技术综述[J]. 航空学报, 2024, 45(5): 529956-529956.
[2]	高一凡, 何锋, 于思凡. 基于发布订阅架构的在线时间触发调度方法[J]. 航空学报, 2023, 44(18): 328125-328125.
[3]	曹传军, 刘天一, 朱伟, 王进春. 民用大涵道比涡扇发动机高压压气机技术进展[J]. 航空学报, 2023, 44(12): 27824-027824.
[4]	黄雄, 曲仕茹, 张恒, 陈显调. 大型客机增升构型缝翼除冰状态失速特性[J]. 航空学报, 2023, 44(1): 627077-627077.
[5]	胡嘉悦, 李广文, 章卫国, 张超, 贾乾磊. 面向有人/无人机协同远程作战的IVMS架构[J]. 航空学报, 2022, 43(3): 325199-325199.
[6]	向锦武, 董希旺, 丁文锐, 索津莉, 沈林成, 夏辉. 复杂环境下无人集群系统自主协同关键技术[J]. 航空学报, 2022, 43(10): 527570-527570.
[7]	贾朝文, 冯兵, 鄢勃, 杨洋, 张学帅, 刘翔, 李燕平. 战斗机电子战系统架构总体设计[J]. 航空学报, 2021, 42(2): 324507-324507.
[8]	符弘岚, 张皓, 高扬. 基于可靠性分析的立方星网络维护架构优化[J]. 航空学报, 2020, 41(7): 323696-323696.
[9]	何萌, 杨体浩, 白俊强, 杨一雄. 基于后缘襟翼偏转的大型客机变弯度技术减阻收益[J]. 航空学报, 2020, 41(7): 123462-123462.
[10]	张立新, 钟顺录, 刘小冬, 付焕兵, 兑红娜, 刘栋梁, 敬禄云, 牟彬杰, 石上路. 先进战斗机强度设计技术发展与实践[J]. 航空学报, 2020, 41(6): 523480-523480.
[11]	王继明, 高云海, 焦仁山. 大型客机低速构型高雷诺数风洞腹撑支架干扰数值模拟[J]. 航空学报, 2020, 41(4): 123526-123526.
[12]	王祥科, 刘志宏, 丛一睿, 李杰, 陈浩. 小型固定翼无人机集群综述和未来发展综述[J]. 航空学报, 2020, 41(4): 23732-023732.
[13]	刘冰雁, 叶雄兵, 高勇, 王新波, 倪蕾. 基于分支深度强化学习的非合作目标追逃博弈策略求解[J]. 航空学报, 2020, 41(10): 324040-324040.
[14]	谭伟伟, 颜洪, 聂智军, 马涂亮, 梁益华. 大型客机涡扇发动机动力特性模拟[J]. 航空学报, 2019, 40(1): 522428-522428.
[15]	陈迎春, 张美红, 张淼, 毛俊, 毛昆, 王祁旻. 大型客机气动设计综述[J]. 航空学报, 2019, 40(1): 522759-522759.