[1] 郭亚军, 吴学仁. 纤维金属层板疲劳裂纹扩速率与寿命预测的唯像模型[J]. 航空学报, 1998, 19(3):275-282. GUO Y J,WU X R. Phenomenological model for predicting fatigue crack growth in fiber reinforced metal laminates[J]. Acta Aeronautica et Astronautica Sinica, 1998, 19(3):275-282(in Chinese).
[2] 陈琪, 关志东, 黎增山. GLARE层板性能研究进展[J]. 科技导报, 2013, 31(7):50-56. CHEN Q, GUAN Z D, LI Z S. Review of GLARE technology[J]. Technology Review, 2013, 31(7):50-56(in Chinese).
[3] 孟维迎, 谢里阳, 刘建中, 等. 玻璃纤维增强铝锂合金层板单峰过载疲劳寿命性能对比研究[J]. 航空学报, 2016, 37(5):1536-1543. MENG W Y, XIE L Y, LIU J Z, et al. Contrast study on fatigue life performance of glass fiber reinforced Al-Li alloy laminates under unimodal overload[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(5):1536-1543(in Chinese).
[4] CHEN J L, SUN C T. Modeling of orthotropic elastic-plastic properties of ARALL laminates[J]. Composites Science & Technology, 1989, 36(4):321-337.
[5] XIA Y, WANG Y, ZHOU Y, et al. Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates[J]. Materials Letters, 2007, 61(1):213-215.
[6] KAWAI M, MORISHITA M, TOMURA S, et al. Inelastic behavior and strength of fiber-metal hybrid composite:Glare[J]. International Journal of Mechanical Sciences, 1998, 40(2-3):183-198.
[7] WU G, YANG J M. Analytical modelling and numerical simulation of the nonlinear deformation of hybrid fibre metal laminates[J]. Modelling & Simulation in Materials Science & Engineering, 2005, 13(3):413-425.
[8] CARRILLO J G, CANTWELL W J. Scaling effects in the tensile behavior of fiber-metal laminates[J]. Composites Science & Technology, 2007, 67(7):1684-1693.
[9] RAJKUMAR G R, KRISHNA M, NARASIMHAMURTHY H N, et al. Investigation of tensile and bending behavior of aluminum based hybrid fiber metal laminates[J]. Procedia Materials Science, 2014(5):60-68.
[10] 马宏毅, 李小刚, 李宏运. 玻璃纤维-铝合金层板的拉伸和疲劳性能研究[J]. 材料工程, 2006(7):61-64. MA H Y, LI X G, LI H Y. Tension and fatigue properties of glass fiber reinforced aluminumlaminates[J]. Journal of Materials Engineering, 2006(7):61-64(in Chinese).
[11] 廖建, 曹增强, 代瑛, 等. GLARE层板偏轴拉伸性能[J]. 塑性工程学报, 2007, 14(5):67-70. LIAO J, CAO Z Q, DAI Y, et al. The off-axis properties ofGLRAE plates[J]. Journal of Plasticity Engineering, 2007, 14(5):67-70(in Chinese).
[12] 王时玉. 纤维金属层板的制备及力学性能研究[D]. 哈尔滨:哈尔滨工业大学, 2012:9-28. WANG S Y. Preparation and mechanical properties of fiber metallaminates[D].Harbin:Harbin Institute of Technology, 2012:9-28(in Chinese).
[13] 王亚杰, 王波, 张龙, 等. 玻璃纤维-铝合金正交层板的拉伸性能研究[J]. 材料工程, 2015, 43(9):60-65. WANG Y J, WANG B, ZHANG L, et al. Tensile properties of glass giber reinforced aluminum orthorhombiclaminate[J]. Journal of Materails Engineering, 2015, 43(9):60-65(in Chinese).
[14] 杨文珂. Glare纤维金属层合板的机械性能仿真分析及其实验验证[D]. 长春:吉林大学, 2016:51-93. YANG W K. Experimental and numerical simulation on mechanical properties of glare fiber metal laminates[D]. Changchun:Jilin University, 2016:51-93(in Chinese).
[15] RAO P M, SUBBA RAO V. Estimating the failure strength of fiber metal laminates by using a hybrid degradation model[J]. Journal of Reinforced Plastics & Composites, 2010, 29(20):3058-3063.
[16] TAY T E, LIU G, TAN V B C, et al. Progressive failure analysis of composites[J]. Journal of Composite Materials, 2008, 42(18):1921-1966.
[17] TAN S C, PEREZ J. Progressive failure of laminated composites with a hole under compressive loading[J]. Journal of Reinforced Plastics & Composites, 1993, 12(10):1043-1057.
[18] TAN S C. A Progressive failure model for composite laminates containing openings[J]. Journal of Composite Materials, 1991, 25(5):556-577.
[19] CAMANHO P P. A progressive damage model for mechanically fastened Joints in composite laminates[J]. Journal of Composite Materials, 1999, 33(24):2248-2280.
[20] IRHIRANE E H, ECHAABI J, ABOUSSALEH M, et al. Matrix and fibre stiffness degradation of a quasi-isotrope graphite epoxy laminate under flexural bending test[J]. Journal of Reinforced Plastics & Composites, 2009, 28(2):201-223.
[21] CORTÉS P, CANTWELL W J. The prediction of tensile failure in titanium-based thermoplastic fibre-metal laminates[J]. Composites Science & Technology, 2006, 66(13):2306-2316.
[22] IACCARINO P, LANGELLA A, CAPRINO G. A simplified model to predict the tensile and shear stress-strain behaviour of fibre glass/aluminium laminates[J]. Composites Science & Technology, 2007, 67(9):1784-1793.
[23] PAN B, QIAN K, XIE H, et al. Topical review:Two-dimensional digital image correlation for in-plane displacement and strain measurement:A review[J]. Measurement Science & Technology, 2009, 20(6):152-154.
[24] HOULT N A, TAKE W A, LEE C, et al. Experimental accuracy of two dimensional strain measurements using digital image correlation[J]. Engineering Structures, 2013, 46(46):718-726.
[25] SOUSA A M R, XAVIER J, VAZ M, et al. Cross-correlation and differential technique combination to determine displacement Fields[J]. Strain, 2011, 47(S2):87-98. |