SA和SST湍流模型对高超声速边界层强制转捩的适应性

doi:10.7527/S1000-6893.2014.0292

流体力学与飞行力学

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

SA和SST湍流模型对高超声速边界层强制转捩的适应性

涂国华^1,2, 燕振国¹, 赵晓慧^1,2, 马燕凯¹, 毛枚良^1,3

1. 中国空气动力研究与发展中心空气动力学国家重点实验室, 绵阳 621000;
2. 中国空气动力研究与发展中心超高速空气动力研究所高超声速冲压发动机技术重点实验室, 绵阳 621000;
3. 中国空气动力研究与发展中心计算空气动力研究所, 绵阳 621000

收稿日期:2014-05-06 修回日期:2014-10-20 出版日期:2015-05-15 发布日期:2014-11-06
通讯作者: 涂国华Tel.: 0816-2463223 E-mail: ght@skla.cardc.cn E-mail:ght@skla.cardc.cn
作者简介:涂国华男, 博士。主要研究方向:高阶精度格式,高超声速空气动力学,高超声速转捩。 Tel: 0816-2463223 E-mail: ght@skla.cardc.cn;燕振国男, 硕士。主要研究方向:计算流体力学,高阶精度格式,隐式时间推进方法。 Tel: 0816-2463209 E-mail: zhgyan@outlook.com
基金资助:
国家自然科学基金 (11072259);高超声速冲压发动机技术重点实验室开放课题

SA and SST turbulence models for hypersonic forced boundary layer transition

TU Guohua^1,2, YAN Zhenguo¹, ZHAO Xiaohui^1,2, MA Yankai¹, MAO Meiliang^1,3

1. State Key Laboratory of Aerodynamics, China Aerodynamics Research and Development Center, Mianyang 621000, China;
2. Science and Technology on Scramjet Key Laboratory, Hypervelocity Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China;
3. Computational Aerodynamics Institute, China Aerodynamics Research and Development Center, Mianyang 621000, China

Received:2014-05-06 Revised:2014-10-20 Online:2015-05-15 Published:2014-11-06
Supported by:
National Natural Science Foundation of China (11072259); The Open Foundation of Science and Technology on Scramjet Key Laboratory

摘要/Abstract

摘要：

凸起物是高超声速流动中常用的一种人工转捩装置。采用高阶精度算法模拟了高超声速进气道压缩面上的强制转捩流动,转捩装置为一排高度为1 mm的钻石型凸起物和斜坡型凸起物。考察了Spalart-Allmaras (SA)模型和剪切应力输运(SST)湍流模型对该问题的适应性。在考察过程中通过丰富的算例分析了网格规模、可压缩修正和空间离散格式等对计算结果的影响。在层流区,计算能与试验取得非常一致的结果。但在湍流区,计算得到的热流通常高出试验数据。经分析发现其原因是强制转捩的湍流边界层与自然转捩的湍流边界层在涡结构上存在较大差别,使得湍流模型的效果较差。针对高超强制转捩湍流涡结构丰富的特点,对SST湍流模型进行了修改。计算结果表明,该修改方法对提高热流精度具有一定效果。

关键词: 湍流模型, 边界层转捩, 涡流发生器, 高阶格式, 可压缩修正

Abstract:

Protuberances are widely used for the trip laminar-turbulent transition of boundary layers. A row of 1 mm height diamond and slop protuberances are installed on the compression surface of a hypersonic inlet model. High-order schemes are applied to simulating the forced-transition flows. The Spalart-Allmaras (SA) and shear stress transport (SST) turbulence models are investigated for this kind of flow. Quite a number of numerical tests are taken to examine to what extent grid sizes, compressibility corrections and spatial discrete schemes influence the numerical accuracy. It turns out that the computed results are well consistent with experimental results in the laminar region, while the computed heating transfer rates are much larger than experimental data in the turbulent region. The inconsistency is suspected to be caused by the vortex structure of forced transitional flows which are quite different from natural transitional flows. The abundant vortices in forced transitional boundary layers may degrade the effectiveness of turbulence models. According to the characteristics of vortex structures, a modification to the SST model is suggested for hypersonic turbulent boundary layers caused by forced transition. Numerical tests indicate that the modification can enhance the accuracy of computed heating transfer rates.

Key words: turbulence models, boundary layer transition, vortex generators, high-order schemes, compressibility corrections

中图分类号:

V211.3
O355

涂国华, 燕振国, 赵晓慧, 马燕凯, 毛枚良. SA和SST湍流模型对高超声速边界层强制转捩的适应性[J]. 航空学报, 2015, 36(5): 1471-1479.

TU Guohua, YAN Zhenguo, ZHAO Xiaohui, MA Yankai, MAO Meiliang. SA and SST turbulence models for hypersonic forced boundary layer transition[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(5): 1471-1479.

参考文献

[1] Zhao H Y, Zhou Y, Ni H L, et al. Test of forced boundary-layer transition on hypersonic inlet[J]. Journal of Experiments in Fluid Mechanics, 2012, 26(1): 1-6 (in Chinese). 赵慧勇, 周瑜, 倪鸿礼, 等. 高超声速进气道边界层强制转捩试验[J]. 实验流体力学, 2012, 26(1): 1-6.
[2] Berry S A, Daryabeigi K, Wurster K, et al. Boundary-layer transition on X-43A[J]. Journal of Spacecraft and Rockets, 2010, 47(6): 922-934.
[3] Berry S A, Auslender A H, Dilley A H, et al. Hypersonic boundary layer trip development for Hyper-X[J]. Journal of Spacecraft and Rockets, 2001, 38(6): 853-864.
[4] Yan Z G. Investigation of implicit time integration methods with HDCS schemes[D]. Mianyang: China Aerodynamics Research and Development Center, 2013 (in Chinese). 燕振国. 高精度混合线性紧致格式的隐式时间推进方法研究[D]. 绵阳: 中国空气动力研究与发展中心, 2013.
[5] Tu G H, Deng X G, Mao M L. Validation of a RANS transition model using a high-order weighted compact nonlinear scheme[J]. Science in China: Physics, Mechanics & Astronomy, 2013, 56(4): 805-811.
[6] Tu G H, Deng X G, Mao M L. Assessment of two turbulence models and some compressibility corrections for hypersonic compression corners by high-order difference schemes[J]. Chinese Journal of Aeronautics, 2012, 25(1): 25-32.
[7] Deng X G, Zhang H X. Developing high-order weighted compact nonlinear schemes[J]. Journal of Computational Physics, 2000, 165(1): 24-44.
[8] Tu G H, Deng X G, Mao M L. A staggered non-oscillatory finite difference method for high-order discretization of viscous terms[J]. Acta Aerodynamica Sinica, 2011, 29(1): 10-15 (in Chinese). 涂国华, 邓小刚, 毛枚良. 消除黏性项高阶离散数值振荡的半结点-结点交错方法[J]. 空气动力学学报, 2011, 29(1): 10-15.
[9] Deng X G, Mao M L, Tu G H, et al. Geometric conservation law and applications to high-order finite difference schemes with stationary grids[J]. Journal of Computational Physics, 2011, 230(4): 1100-1115.
[10] Yan Z G, Liu H Y, Mao M L, et al. Development of 3rd order HWCNS scheme and its application in hypersonic flow simulations[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(5): 1460-1470 (in Chinese). 燕振国, 刘化勇, 毛枚良, 等.三阶HWCNS 格式的构造及在高超流动中的应用[J]. 航空学报, 2015, 36(5): 1460-1470
[11] Deng X G, Mao M L, Tu G H, et al. Extending weighted compact nonlinear schemes to complex grids with characteristic-based interface conditions[J]. AIAA Journal, 2010, 48(12): 2840-2851.
[12] Tu G H, Mao M L, Deng X G. Implementing high-order weighted compact nonlinear scheme on patched grids with a nonlinear interpolation[J]. Computers & Fluids, 2013, 77: 181-193.
[13] Deng X G, Mao M L, Tu G H, et al. High-order and high accurate CFD methods and their applications for complex grid problems[J]. Communication in Computational Physics, 2012, 11(4): 1081-1102.
[14] Deng X B. Freestream noise impact on forced transition of hypersonic boundary layer[C]//CCTAM-2013. Beijing: Chinese Mechanics Society, 2013: 1-8 (in Chinese). 邓小兵. 来流噪声对高超声速进气道强制转捩的影响[C]//中国力学大会-2013. 北京: 中国力学学会, 2013:1-8.
[15] Yan Z G, Liu H Y, Mao M L, et al. Convergence property investigation of GMRES method based on high-order dissipative compact scheme[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(5): 1181-1192 (in Chinese). 燕振国, 刘化勇, 毛枚良, 等.基于高阶耗散紧致格式的GMRES方法收敛特性研究[J]. 航空学报, 2014, 35(5): 1181-1192.
[16] Wilcox D C. Turbulence modeling for CFD[M]. 3rd ed. La Canada: DWC Industries, 2006.
[17] Wilcox D C. Formulation of the k-omega turbulence model revisited[J]. AIAA Journal, 2008, 46(11): 2823-2838.
[18] Dacles-Mariani J, Kwak D, Zlliac G G. On numerical errors and turbulence modeling in tip vortex flow prediction[J]. International Journal for Numerical Methods in Fluids, 1999, 30(1): 65-82.
[19] Denissen N A, Yoder D A, Georgiadis N J. Implementation and validation of a laminar-to-turbulent transition model in the Wind-US code, NASA/TM-2008-215451[R]. Washington, D.C.: NASA, 2008.
[20] Dhawan S, Narasimha R. Some properties of boundary-layer flow during transition from laminar to turbulent motion[J]. Journal of Fluid Mechanics, 1958, 3(4): 414-436.
[21] Fu S, Wang L. RANS modeling of high-speed aerodynamic flow transition with consideration of stability theory[J]. Progress in Aerospace Sciences, 2013, 58: 36-59.
[22] Langtry R B, Menter F R. Correlation-based transition modeling for unstructured parallelized computational fluid dynamics codes[J]. AIAA Journal, 2009, 47(12): 2894-2906.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

SA和SST湍流模型对高超声速边界层强制转捩的适应性

SA and SST turbulence models for hypersonic forced boundary layer transition

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	韩少强, 宋文萍, 韩忠华, 许建华. 高速共轴刚性旋翼非定常流动高精度数值模拟[J]. 航空学报, 2024, 45(9): 529064-529064.
[2]	汪洪波, 曾宇, 熊大鹏, 杨揖心, 孙明波. SST湍流模型的激波与可压缩效应改进[J]. 航空学报, 2024, 45(3): 128694-128694.
[3]	李学良, 李创创, 苏伟, 吴杰. 分布式粗糙元对高超声速边界层不稳定性的影响试验[J]. 航空学报, 2024, 45(2): 128627-128627.
[4]	张恺玲, 李思怡, 段毅, 阎超. 进气道流动中SST湍流模型参数的不确定度量化[J]. 航空学报, 2023, 44(S2): 729429-729429.
[5]	曾宇, 汪洪波, 孙明波, 王超, 刘旭. SST湍流模型改进研究综述[J]. 航空学报, 2023, 44(9): 27411-027411.
[6]	刘宏康, 陈坚强, 向星皓, 赵雅甜. 改进k-ω-γ转捩模式对不同雷诺数下HIAD的转捩预测[J]. 航空学报, 2023, 44(6): 126868-126868.
[7]	王梦格, 何小明, 王娟娟, 张悦, 汪昆, 谭慧俊, 李留刚. 基于振荡式涡流发生器的激波/边界层干扰控制方法[J]. 航空学报, 2023, 44(20): 128503-128503.
[8]	刘锬韬, 李瑞宇, 高丽敏, 赵磊. 基于数据同化的试验数据驱动的叶栅流场预测[J]. 航空学报, 2023, 44(14): 628201-628201.
[9]	陈涛, 徐兴平, 张宏达, 韩省思. 自适应湍流耦合建表燃烧模型的振荡燃烧数值模拟[J]. 航空学报, 2023, 44(14): 628207-628207.
[10]	陈伟芳, 孙精华, 田得阳, 陈烨斯. 物理化学模型对流场电磁散射特性的影响[J]. 航空学报, 2023, 44(12): 127707-127707.
[11]	田得阳, 平熠, 陈烨斯, 陈伟芳. 物理化学模型对流场电磁波传播特性影响[J]. 航空学报, 2022, 43(S2): 214-224.
[12]	刘强, 涂国华, 罗振兵, 陈坚强, 赵瑞, 袁先旭. 延迟高超声速边界层转捩技术研究进展[J]. 航空学报, 2022, 43(7): 25357-025357.
[13]	张昊元, 孙东, 邱波, 朱言旦, 王安龄. 湍动能在激波/边界层干扰流动中的影响[J]. 航空学报, 2022, 43(7): 125504-125504.
[14]	李强, 万兵兵, 杨凯, 朱涛. 高超声速尖锥边界层压力脉动和热流脉动特性试验[J]. 航空学报, 2022, 43(2): 124956-124956.
[15]	舒博文, 杜一鸣, 高正红, 夏露, 陈树生. 典型航空分离流动的雷诺应力模型数值模拟[J]. 航空学报, 2022, 43(11): 526385-526385.