| [1] Cooper A A G. Trajectory fiber reinforcement of composite structure. St. Louis: Washington University in St. Louis (MO), 1972.[2] Katz Y, Haftka R T, Altus E. Optimization of fiber directions for increasing the failure load of a plate with a hole. Proceedings of the American Society of Composites 4th Technical Conference. Lancaster, PA: Technomic, 1989: 62-71.[3] Hyer M W, Charette R F. Use of curvilinear fiber format in composite structure design. Proceedings of the 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference and Exhibit. Washington, DC: American Institute of Aeronautics and Astronautics, 1989: 2137-2145.[4] Hyer M W, Lee H H. The use of curvilinear fiber format to improve buckling resistance of composite plates with central holes. Composites Structures, 1991, 18(3): 239-261.[5] Jones S E, Platts M J. Using internal fiber geometry to improve the performance of pin-loaded holes in composite materials. Applied Composite Materials, 1996, 3(2): 117-134.[6] Pratt W F, Rotz C A, Jensen C G. Improved damping and stiffness in composite structures using geometric fiber wave patterns. Proceedings of the ASME Noise Control and Acoustics Division, Advanced Materials for Vibroacoustic Applications (2nd Edition), Vol. 2, New York: American Society for Mechanical Engineers, 1996: 37-43.[7] Reuschel D, Mattheck C. Three-dimensional fiber optimization with computer aided internal optimization. Aeronautical Journal, 1999, 109(1027): 415-420.[8] Gurdal Z, Olmedo R. In-plane response of laminates with spatially varying fiber orientations: variable stiffness concept. AIAA Journal, 1993, 31(4): 751-758.[9] Olmedo R, Gurdal Z. Buckling response of laminates with spatially varying fiber orientations. Proceedings of the AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. La Jolla, CA: AIAA Press, 1993: 2261-2269.[10] Waldhart C, Gurdal Z, Ribbens C. Analysis of tow placed, parallel fiber, variable stiffness laminates. Proceedings of the 1996 37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Salt Lake City, UT: AIAA Press, 1996: 2210-2220.[11] Eschenauer H, Schuhmacher G, Krammer J. Constructive design models for multidisciplinary optimization of fiber composite structures. AIAA/USAF/NASA/OAI Symposium on Multidisciplinary Analysis and Optimization, 4th. Cleveland, OH: AIAA Press, 1992: 1142-1152.[12] Nagendra S, Kodiyalam S, Davis J E, et al. Optimization of tow fiber paths for composite design. Proceedings of the 36th Structures, Structural Dynamics, and Materials Conference. New Orleans, LA: Structures, Structural Dynamics, and Materials Conference, 1995: 1031-1041.[13] Berchtold G, Klenner J. The integrated design and manufacturing of composite structures for aircraft using an advanced tape laying technology. Bermen: DGLR-Jahrestagung, 1992.[14] Hale R D, Moon R, Lim K, et al. Integrated design and analysis tools for reduced weight, affordable fiber steered composites. Lawrence, Kansas: University of Kansas, 2004.[15] Shao G J, You Y P, Xiong H. Optimal fiber placement paths for free-form surface parts. Journal of Nanjing University of Aeronautics & Astronautics, 2005, 37(S1): 144-148. (in Chinese) 邵冠军, 游有鹏, 熊慧. 自由曲面构件的纤维铺放路径规划. 南京航空航天大学学报, 2005, 37(S1): 144-148.[16] Huan D J, Xiao J, Li Y. Trajectory generation algorithm for automated fiber placement with given fiber orientations of key points. Journal of Nanjing University of Science and Technology, 2011, 35(3): 410-414. (in Chinese) 还大军, 肖军, 李勇. 给定点纤维方向的自动铺丝轨迹规划算法. 南京理工大学学报, 2011, 35(3): 410-414.[17] Wang P Y. Research on fiber placement trajectory design algorithm for the free-form surface with given ply orientation information. Nanjing: College of Materials Science & Technology, Nanjing University of Aeronautics & Astronautics, 2011. (in Chinese) 王培源. 基于铺层承载信息的自由曲面自动铺丝轨迹规划技术研究. 南京: 南京航空航天大学材料科学与技术学院, 2011.[18] Xiong W L, Xiao J, Wang X F, et al. Algorithm of adaptive path planning for automated placement on meshed surface. Acta Aeronautica et Astronautica Sinica, 2013, 34(2): 434-441. (in Chinese) 熊文磊, 肖军, 王显峰, 等. 基于网格化曲面的自适应自动铺放轨迹算法. 航空学报, 2013, 34(2): 434-441.[19] Gutowski T G. Advanced composites manufacturing.New York: John Wiley & Sons Inc, 1997.[20] Mei X M, Huang J Z. Differential geometry. Beijing: Higher Education Press, 2005: 145-146. (in Chinese) 梅向明, 黄敬之. 微分几何. 北京: 高等教育出版社, 2005: 145-146.[21] Zeng W, Xiao J, Li Y, et al. Research on path planning and coverability analysis of automatic fiber placement for structures in revolving shell. Journal of Astronautics, 2010, 31(1): 239-243 (in Chinese) 曾伟, 肖军, 李勇, 等. 回转体自动铺丝轨迹规划与覆盖性分析. 宇航学报, 2010, 31(1): 239-243.[22] Zhou Y, An L L, Zhou L S. Research on composite fiber placement path generation algorithm. Aviation Precision Manufacturing Technology, 2006, 42(2): 39-41. (in Chinese) 周燚, 安鲁陵, 周来水. 复合材料自动铺丝路径生成技术研究. 航空精密制造技术, 2006, 42(2): 39-41.[23] An L L, Zhou Y, Zhou L S. Composite fiber placement path planning and fiber number determination. Acta Aeronautica et Astronautica Sinica, 2007, 28(3): 745-750. (in Chinese) 安鲁陵, 周燚, 周来水. 复合材料纤维铺放路径规划与丝数求解. 航空学报, 2007, 28(3): 745-750.[24] Wang N D, Liu Y, Xiao J. Fiber-placement path design for composite structures in pipy-form. Journal of Computer-Aided Design & Computer Graphics, 2008, 20(2): 228-233. (in Chinese) 王念东, 刘毅, 肖军. 复合材料管状结构自动铺丝路径算法. 计算机辅助设计与图形学学报, 2008, 20(2): 228-233.[25] Shao Z X, Fu H Y, Han Z Y, et al. Path planning and optimization algorithm for fiber placement of S-shaped inlet. Journal of Astronautics, 2010, 31(3): 855-861. (in Chinese) 邵忠喜, 富宏亚, 韩振宇, 等. S形进气道纤维铺放轨迹规划和优化方法. 宇航学报, 2010, 31(3): 855-861.[26] Han Z Y, Shao Z X, Fu H Y, et al. Meshing method of fiber placement track for S-shaped inlet. Aeronautical Manufacturing Technology, 2009(19): 72-78. (in Chinese) 韩振宇, 邵忠喜, 富宏亚, 等. S型进气道纤维铺放轨迹网格化生成. 航空制造技术, 2009(19): 72-78.[27] Xu T. Research on trajectory planning of automatic fiber placement for structures in similar revolving shell. Nanjing: College of Materials Science & Technology, Nanjing University of Aeronautics & Astronautics, 2011. (in Chinese) 徐涛. 不可解析的类回转体自动铺丝轨迹规划的研究. 南京:南京航空航天大学材料科学与技术学院, 2011. |
CJA
