| [1] HADA S, TSUKAGOSHI K, JUNICHIRO M. Test results of the world's first 1600℃ J-series gas turbines[J]. MHI Technical Review, 2012, 49(1):18-23.[2] LEE D H, SONG J, JO M C. The effects of nozzle diameter on impinging jet heat transfer and fluid flow[J]. Journal of Heat Transfer, 2004, 126(4):554-557.[3] KATTI V, PRABHU S V. Influence of spanwise pitch on local heat transfer distribution for in-line arrays of circular jets with spent air flow in two opposite directions[J]. Experimental Heat Transfer, 2009, 22(4):228-256.[4] DAILEY G M, CHAMBERS A C, GILLESPIE D R H, et al. The effect of initial cross flow on the cooling performance of a narrow impingement channel[J]. Journal of Heat Transfer, 2005, 127(4):358-365.[5] LI W H, LI X Y, REN J. Effect of Reynolds number, hole patterns and hole inclination on cooling performance of an impingement jet array:Part Ⅰ-Convective heat transfer results and optimization:GT2016-56205[R]. New York:ASME, 2016.[6] SHAN Y, ZHANG J Z, XIE G N. Convective heat transfer for multiple rows of impinging air jets with small jet-to-jet spacing in a semi-confined channel[J]. International Journal of Heat and Mass Transfer, 2015, 86:832-842.[7] CHANG H P, ZHANG D L, HUANG T P. Impingement heat transfer from rib roughened surface within arrays of circular jet:The effect of the relative position of the jet hole to the ribs:GT1997-331[R]. New York:ASME, 1997.[8] ANDREWS G, HUSSAIN R A A A, MKPADI M C. Enhanced impingement heat transfer:Comparison of co-flow and cross-flow with rib turbulators:IGTC-2003-075[R]. Tokyo:Gas Turbine Society of Japan, 2003.[9] ZHANG J Z, LI L G. High-resolution heat transfer coefficients measurement for jet impingement using thermochromic liquid crystals[J]. Chinese Journal of Aeronautics, 2001, 14(4):205-209.[10] XING Y, SPRING S, WEIGAND B. Experimental and numerical investigation of impingement heat transfer on a flat and micro-ribs roughened plate with different crossflow schemes[J]. International Journal of Thermal Sciences, 2011, 50(7):1293-1307.[11] DEVORE M A, PAAUWE C S. Turbine airfoil with improved cooling:7600966 B2[P]. 2009-10-13.[12] CHYU M K, SIW S H. Recent advances of internal cooling techniques for gas turbine airfoils[J]. Journal of Thermal Science and Engineering Applications,2013, 5(2):021008.[13] ZHANG J Z, XIE H, YANG C F. Numerical study of flow and heat transfer characteristics of impingement/effusion cooling[J]. Chinese Journal of Aeronautics, 2009, 22(4):343-348.[14] 郑杰,朱惠人.微尺度冲击冷却通道换热特性实验研究[J]. 推进技术, 2015, 36(1):82-88. ZHENG J, ZHU H R. Experimental investigation on jet impingement heat transfer for micro-channel[J]. Journal of Propulsion Technology, 2015, 36(1):82-88(in Chinese).[15] IRELAND P T, JONES T V. Liquid crystal measurements of heat transfer and surface shear stress[J]. Measurement Science and Technology, 2000, 11(7):969-986.[16] KLINE S J, MCCLINTOCK F A. Describing uncertainties in single-sample experiments[J]. Mechanical Engineering, 1953, 75(1):3-8.[17] KINGSLEY-ROWE J R, LOCK G D, OWEN J M. Transient heat transfer measurements using thermochromic liquid crystal:Lateral-conduction error[J]. International Journal of Heat and Fluid Flow, 2005, 26(2):256-263.[18] XING Y, SPRING S, WEIGAND B. Experimental and numerical investigation of heat transfer characteristics of inline and staggered arrays of impinging jets[J]. Journal of Heat Transfer, 2010, 132(9):092201.[19] ROACHE P J. Perspective:A method for uniform reporting of grid refinement studies[J]. Journal of Fluids Engineering, 1994, 116(3):405-413.[20] EI-GABRY L A, KAMINSKI D A. Experimental investigation of local heat transfer distribution on smooth and roughened surfaces under an array of angled impingement jets[J]. Journal of Turbomachinery, 2005, 127(3):532-544.[21] KERCHER D, TABAKOFF W. Heat transfer by a square array of round air jets impinging perpendicular to a flat surface including the effect of spent air[J]. Journal of Engineering for Power, 1970, 92(1):73-82. |
CJA
