航空学报 > 2012, Vol. Issue (4): 666-671   doi: CNKI:11-1929/V.20111011.1411.007

基于CDM-CZM的复合材料补片补强参数分析

姚辽军, 赵美英, 万小朋   

  1. 西北工业大学 航空学院, 陕西 西安 710072
  • 收稿日期:2011-07-05 修回日期:2011-08-08 出版日期:2012-04-25 发布日期:2012-04-20
  • 通讯作者: 赵美英 E-mail:zhaomeiying@nwpu.edu.cn

Parameter Analysis of Composite Laminates with Patched Reinforcement Based on CDM-CZM

YAO Liaojun, ZHAO Meiying, WAN Xiaopeng   

  1. School of Aeronautics, Northwestern Polytechnical University, Xi’an 710072, China
  • Received:2011-07-05 Revised:2011-08-08 Online:2012-04-25 Published:2012-04-20

摘要: 复合材料开口补强设计参数的确定对于结构设计具有重要的意义。针对复合材料层合板开口区补片补强结构,采用各向异性材料连续介质损伤力学模型(CDM)对复合材料层合板的损伤演化进行描述,采用粘聚区模型(CZM)对补片与母板间界面材料的分层损伤进行模拟,建立了复合材料开口区补片补强结构三维非线性渐进损伤模型,模型可预测补强结构强度和损伤演化过程。应用本文模型分析了补片铺层方式、补片厚度和补片半径3个主要设计参数对补强效果的影响,明确了补片与母板间界面材料分层损伤破坏是导致补强结构最终失效的主要原因。

关键词: 复合材料, 连续介质损伤力学模型, 粘聚区模型, 开口结构, 补强, 强度

Abstract: It is of engineering significance to determine the parameters of reinforcement design of notched composite laminates. In order to understand the influence of these parameters on the structure strength and damage propagation, a three-dimension anisotropic continuum damage model (CDM) is developed to describe the onset and damage evolution in a notched composite laminate under tensile loading condition. A cohesive zone model (CZM) is used to simulate the damage evolution of an adhesive material between the notched composite laminate and the patched reinforcement structure. Good agreement is obtained between the numerical and the experimental results. Based on the validated model, three main parameters for reinforcement design are discussed, i.e., the lay-up configuration, patch thickness and radius of patch reinforcement. Furthermore, the delamination of the adhesive layer between the laminate and the patch is found to be the primary reason for the final failure of the reinforced structure.

Key words: composite materials, continuum damage model, cohesive zone model, notched structure, reinforcement, strength

中图分类号: