串件拼修对策下多级维修供应的装备系统 可用度评估

doi:CNKI:11-1929/V.20111223.1225.001

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

串件拼修对策下多级维修供应的装备系统可用度评估

阮旻智¹, 李庆民¹, 彭英武¹, 黄傲林^1,2, 王慎¹

1. 海军工程大学兵器工程系, 湖北武汉 430033;
2. 海军工程大学电子工程学院指挥自动化系, 湖北武汉 430033

收稿日期:2011-06-20 修回日期:2011-08-14 出版日期:2012-04-25 发布日期:2012-04-20
通讯作者: 李庆民 E-mail:licheng0001@hotmail.com
基金资助:
国防预研项目(51304010206,51327020105)

Evaluation of Equipment System Availability for Multi-echelon Maintenance Supply with Cannibalization

RUAN Minzhi¹, LI Qingmin¹, PENG Yingwu¹, HUANG Aolin^1,2, WANG Shen¹

1. Department of Weaponry Engineering, Naval University of Engineering, Wuhan 430033, China;
2. Department of Command and Robotization, School of Electronic Engineering, Naval University of Engineering, Wuhan 430033, China

Received:2011-06-20 Revised:2011-08-14 Online:2012-04-25 Published:2012-04-20

摘要/Abstract

摘要： 实施串件拼修对策是提高装备保障效能的有效途径,能够在现有保障条件下使装备可用度达到上限。针对该问题,在备件多级维修供应模式下,根据串件拼修的特点,并结合可修复备件库存分配建模理论(METRIC),建立了非串件系统、串件系统以及不完全串件系统可用度评估模型。研究了串件对策下装备保障效能的分析流程和方法。通过实验设计,确定初始备件库存方案,在给定的方案下,对不同串件对策下装备的可用度进行评估。采用VMETRIC平台对模型进行验证,结果表明,本文模型结果与VMETRIC仿真结果具有相当高的吻合度,证明了模型的正确性。

关键词: 装备保障工程, 多级维修供应, 串件拼修, METRIC模型, 可用度, 备件

Abstract: Cannibalization policy is an effective approach to improve support effectiveness. Under the current support condition, it can make equipment availability reach the upper limit. This paper establishs respectively availability models of a non-cannibalization system, a cannibalization system and a partial cannibalization system under the mode of multi-echelon maintenance supply in accordance with the characteristics of cannibalization combined with multi-echelon technique for recoverable item control(METRIC) theory. The analysis flow and method of support effectiveness are studied. In a given example, The initial spare parts inventory project is obtained under which the equipment availability is analyzed with different cannibalization policies. VMETRIC simulation is used to test the results, and the verification shows that there is high consistency between the two results, which proves the validity of the model.

Key words: equipment support engineering, multi-echelon maintenance supply, cannibalization, METRIC model, availability, spare part

中图分类号:

V215.7

阮旻智, 李庆民, 彭英武, 黄傲林, 王慎. 串件拼修对策下多级维修供应的装备系统可用度评估[J]. 航空学报, 2012, (4): 658-665.

RUAN Minzhi, LI Qingmin, PENG Yingwu, HUANG Aolin, WANG Shen. Evaluation of Equipment System Availability for Multi-echelon Maintenance Supply with Cannibalization[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, (4): 658-665.

参考文献

[1] Shah J,Avittathur B.The retailer multi-item inventory problem with demand cannibalization and substitution.International Journal of Production Economics,2007,106(1): 104-114.
[2] Sherbrooke C C.METRIC:a multi-echelon technique for recoverable item control.Operations Research,1968,16(1): 122-141.
[3] de Haas H F M,Verrijdt J H C M.Target setting for the departments in an aircraft repairable item system.European Journal of Operational Research,1997,99(3): 596-602.
[4] Yoon K B, Sohn S Y.Finding the optimal CSP inventory level for multi-echelon system in Air Force using random effects regression model.European Journal of Operational Research,2007,180(3): 1076-1085.
[5] Wang N C,Kang R.Optimization of multi-echelon repairable item inventory systems with fill rate as objective.Acta Aeronautica et Astronautica Sinica,2009,30(6):1043-1047.(in Chinese) 王乃超,康锐.基于备件保障概率的多级库存优化模型.航空学报,2009,30(6): 1043-1047.
[6] Lee L H, Chew E P, Teng S Y, et al.Multi-objective simu-lation-based evolutionary algorithm for an aircraft spare parts allocation problem.European Journal of Operational Research, 2008,189(2): 325-341.
[7] Sleptchenko A,van der Heijden M C,van Harten A.Effects of finite repair capacity in multi-echelon,multi-indenture service part supply systems.International Journal of Production Economics, 2002, 79(3): 209-230.
[8] Rustenburg W D,van Houtum G J,Zijm W H M.Spare parts management at complex technology-based organizations: an agenda for research.International Journal of Production Economics, 2001, 71(1): 177-193.
[9] Jung W.Recoverable inventory systems with time-varying demand.Production and Inventory Management Journal,1993, 34 (1): 77-81.
[10] Liu Y,Wu C,Li Y,et al.Evaluation model of equipment time-varying availability in two-echelon spare support system.Acta Armanentarii, 2010, 31(2): 253-256.(in Chinese) 刘勇,武昌,李阳,等.两级备件保障系统的装备时变可用度评估模型.兵工学报, 2010, 31(2): 253-256.
[11] Lau H C, Song H W, See C T, et al.Evaluation of time-varying availability in multi-echelon spare parts systems with passivation.European Journal of Operational Research, 2006, 170(1): 91-105.
[12] Sun J C, Li S J, Lu Y M,et al.Simulation and research on the three-echelon storage model of the valuable spare parts in weapon equipment.Acta Armanentarii,2008,29(7):854-858.(in Chinese) 孙江生,李苏剑,吕艳梅,等.武器贵重备件三级库存模型仿真研究.兵工学报, 2008, 29(7): 854-858.
[13] Fisher W W,Brennan J J.Performance of cannibalization policies in a maintenance system with spares,repair,and resource constraints.Naval Research Logistics Quarterly,1986, 33(1): 1-15.
[14] Fisher W W, Brennan J J. Model for cannibalization policy performance comparisons in a complex maintenance system.Proceedings of the Summer Computer Simulation Conference.San Diego,CA,USA:North-Holland, 1985:585-589.
[15] Byrkett D L.Units of equipment available using cannibalization for repair-part support.IEEE Transactions on Reliability, 1985, 34(1): 25-28.
[16] Salman S,Cassady C R, Pohl E A, et al.Evaluating the impact of cannibalization on fleet performance.Quality and Reliability Engineering International,2007,24(4):445-457.
[17] Fisher W W.Markov process modeling of a maintenance system with spares,repair,cannibalization and manpower constraints.Mathematical and Computer Modeling,1990,13(7): 119-125.
[18] Li L W, Zhang J J, Zhang T, et al.Mission oriented cannibalization policy problem and its solving algorithm.Systems Engineering Theory & Practice,2009,29(7): 97-104.(in Chinese) 李羚伟,张建军,张涛,等.面向任务的拼修策略问题及其求解算法.系统工程理论与实践, 2009, 29(7): 97-104.
[19] Sherbrooke C C.Optimal inventory modeling of system:multi-echelon techniques.2nd ed.Boston:Artech House,2004.
[20] Sherbrooke C C.Estimation of the variance-to-mean ratio for AFLC recoverable items.Potomac,MD: Sherbrooke & Associates, 1984.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

串件拼修对策下多级维修供应的装备系统可用度评估

Evaluation of Equipment System Availability for Multi-echelon Maintenance Supply with Cannibalization

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王俊龙, 楼京俊, 阮旻智, 徐立. 面向满足率与利用率的通用备件优化配置方法[J]. 航空学报, 2022, 43(5): 226978-226978.
[2]	何勇, 王红, 李晶, 齐彦昆. 基于振动监测的部件状态维修与备件订购联合决策[J]. 航空学报, 2022, 43(5): 225304-225304.
[3]	徐立, 阮旻智, 李华, 周亮. 威布尔型通用件配置方案评估及优化[J]. 航空学报, 2021, 42(9): 224655-224655.
[4]	黎放, 何有宸, 狄鹏, 陈童, 尹东亮. 考虑维修力量影响及载荷动态分配的k/n系统模糊可靠性分析[J]. 航空学报, 2018, 39(4): 221718-221718.
[5]	邵松世, 张志华, 李华, 刘任洋. 正态型有寿件的备件方案确定方法[J]. 航空学报, 2018, 39(1): 221147-221147.
[6]	周亮, 李庆民, 彭英武, 李华. 串件拼修对策下K/N(G)结构系统可用度评估建模[J]. 航空学报, 2017, 38(4): 220319-220319.
[7]	刘任洋, 李华, 李庆民. 任务期间考虑故障件报废无补给下的多级装备可用度评估[J]. 航空学报, 2017, 38(4): 220465-220465.
[8]	夏国清, 栾添添, 孙明晓, 仲伟东, 刘彦文. 考虑调运时间的舰载机备件供应系统模糊优化[J]. 航空学报, 2017, 38(12): 321234-321234.
[9]	周亮, 李庆民, 彭英武, 李华. 动态保障结构下多级多层备件配置优化建模[J]. 航空学报, 2017, 38(11): 220822-220822.
[10]	徐宗昌, 张永强, 呼凯凯, 岳付昌. 备件携行量研究方法综述[J]. 航空学报, 2016, 37(9): 2623-2633.
[11]	刘任洋, 李庆民, 李华, 熊宏锦. 多指标约束下考虑报废的可修复备件携行方案优化[J]. 航空学报, 2016, 37(10): 3131-3139.
[12]	刘任洋, 黎放, 李庆民, 李华. 基于横向转运策略的不完全修复件库存配置与订购模型[J]. 航空学报, 2015, 36(6): 1964-1974.
[13]	王蕴, 王乃超, 马麟, 李铁, 邓浩然. 考虑备件约束的多部件串联系统使用可用度计算方法[J]. 航空学报, 2015, 36(4): 1195-1201.
[14]	徐立, 李庆民, 李华. 考虑多类维修优先权的多级维修供应系统库存控制[J]. 航空学报, 2015, 36(4): 1185-1194.
[15]	卢雷, 杨江平. k/N（G）结构系统初始备件配置方法[J]. 航空学报, 2014, 35(3): 773-779.

串件拼修对策下多级维修供应的装备系统 可用度评估

Evaluation of Equipment System Availability for Multi-echelon Maintenance Supply with Cannibalization

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

串件拼修对策下多级维修供应的装备系统可用度评估