导航
Archive
Advance in the study on wing aeroelasticity with concentrated nonlinearity
YANG Zhichun, TIAN Wei, GU Yingsong, HE Shun
doi: 10.7527/S1000-6893.2016.0140
2016, (7): 2013-2044.
PDF [ 12044 K ]( 919 ) HTML
Current situation and development trend of polishing technology for blisk
HUANG Yun, XIAO Guijian, ZOU Lai
doi: 10.7527/S1000-6893.2016.0055
2016, (7): 2045-2064.
PDF [ 15737 K ]( 1206 ) HTML
Laminar flow active/passive control technology
ZHU Ziqiang, JU Shengjun, WU Zongcheng
doi: 10.7527/S1000-6893.2016.0113
2016, (7): 2065-2090.
PDF [ 15864 K ]( 1222 ) HTML
A quasi-one-dimensional nonlinear model of an open-closed standing-wave thermoacoustic engine
HOU Wei, WANG Xiaoyu, JING Xiaodong, SUN Xiaofeng
doi: 10.7527/S1000-6893.2015.0207
2016, (7): 2091-2101.
PDF [ 5738 K ]( 400 ) HTML
Frequency optimization and vortex dynamic process analysis of separated flow control by nanosecond pulsed plasma discharge
DU Hai, SHI Zhiwei, CHENG Keming, LI Ganniu, SONG Tianwei, LI Zheng
doi: 10.7527/S1000-6893.2015.0246
2016, (7): 2102-2111.
PDF [ 9879 K ]( 589 ) HTML
Laminar separation control at low Reynolds numbers using plasma actuation
MENG Xuanshi, YANG Zeren, CHEN Qi, BAI Peng, HU Haiyang
doi: 10.7527/S1000-6893.2015.0244
2016, (7): 2112-2122.
PDF [ 8061 K ]( 740 ) HTML
Flow direction effect on heat transfer of supercritical CO2 in helically coiled tube
LI Hongrui, XU Xiaoxiao, LIU Chao, LIU Xinxin
doi: 10.7527/S1000-6893.2015.0245
2016, (7): 2123-2131.
PDF [ 66566 K ]( 423 ) HTML
Numerical simulation of CH4-LO<i>x non-premixed turbulent combustion at supercritical pressures
WANG Qiuxiao, HUANG Dongxin, MENG Hua
doi: 10.7527/S1000-6893.2015.0279
2016, (7): 2132-2143.
PDF [ 9662 K ]( 576 ) HTML
Efficient aerodynamic optimization method using hierarchical Kriging model combined with gradient
SONG Chao, YANG Xudong, SONG Wenping
doi: 10.7527/S1000-6893.2015.0260
2016, (7): 2144-2155.
PDF [ 7212 K ]( 505 ) HTML
An efficient mesh deformation method based on radial basis functions and peak-selection method
WEI Qi, LI Chunna, GU Liangxian, GONG Chunlin
doi: 10.7527/S1000-6893.2015.0343
2016, (7): 2156-2169.
PDF [ 10276 K ]( 680 ) HTML
Parameter design of helicopter with optimum speed rotor based on uncertainty optimization
XU Ming, LI Jianbo, PENG Minghua, LIU Cheng
doi: 10.7527/S1000-6893.2015.0285
2016, (7): 2170-2179.
PDF [ 5223 K ]( 413 ) HTML
Effects of defects in cylindrical panels and fix-errors on buckling behavior
ZHU Lin, YU Yin, WANG Hai
doi: 10.7527/S1000-6893.2015.0352
2016, (7): 2180-2188.
PDF [ 3508 K ]( 479 ) HTML
Study on a low frequency vibration isolator based on combined positive and negative stiffness
DONG Guangxu, LUO Yajun, YAN Bo, ZHANG Xinong
doi: 10.7527/S1000-6893.2015.0297
2016, (7): 2189-2199.
PDF [ 13004 K ]( 570 ) HTML
Fatigue life prediction for titanium plate considering impact defect
ZHAN Zhixin, TONG Yang, LI Binkai, HU Weiping, MENG Qingchun
doi: 10.7527/S1000-6893.2015.0298
2016, (7): 2200-2207.
PDF [ 4575 K ]( 495 ) HTML
Flight performance of helicopter rotors with Gurney flaps
ZHANG Yonggang, CUI Zhao, HAN Dong, LI Jianbo
doi: 10.7527/S1000-6893.2015.0299
2016, (7): 2208-2217.
PDF [ 8306 K ]( 582 ) HTML
Retraction load equivalent research of a certain airplane nose gear
SHEN Wenjing, PENG Zhijun, LI Bin, YE Bin
doi: 10.7527/S1000-6893.2015.0272
2016, (7): 2218-2224.
PDF [ 3452 K ]( 1139 ) HTML
Experimental research on mechanical properties of 3D full 5-direactional braided composites lugs
LIU Zhenguo, LIN Qiang, YA Jixuan, HU Long, WANG Yibo
doi: 10.7527/S1000-6893.2015.0265
2016, (7): 2225-2233.
PDF [ 5720 K ]( 481 ) HTML
A Kriging surrogate model method for moment-independent importance analysis
ZHAO Hailong, YUE Zhufeng, LIU Wei
doi: 10.7527/S1000-6893.2015.0248
2016, (7): 2234-2241.
PDF [ 3396 K ]( 505 ) HTML
Mathematical modelling and calibration experiment of new electrostatic sensor in aviation
MAO Huijie, ZUO Hongfu, HUANG Wenjie, YIN Yibing, LIU Chenning
doi: 10.7527/S1000-6893.2015.0007
2016, (7): 2242-2250.
PDF [ 4874 K ]( 558 ) HTML
Emitter recognition algorithm based on compressively collaborative representation
ZHOU Zhiwen, HUANG Gaoming, GAO Jun
doi: 10.7527/S1000-6893.2015.0313
2016, (7): 2251-2258.
PDF [ 3958 K ]( 448 ) HTML
A CFAR outlier detection method under varying SNR conditions
RU Xiaohu, LIU Zheng, JIANG Wenli, HUANG Zhitao
doi: 10.7527/S1000-6893.2015.0348
2016, (7): 2259-2268.
PDF [ 5503 K ]( 434 ) HTML
A 2D DOA estimation method for sparse array
ZENG Wenhao, ZHU Xiaohua, LI Hongtao, MA Yigeng, CHEN Cheng
doi: 10.7527/S1000-6893.2015.0346
2016, (7): 2269-2275.
PDF [ 3591 K ]( 745 ) HTML
A waveform optimization designing method for cognitive radar with stepped-frequency signal
CHEN Chunhui, ZHANG Qun, LUO Ying
doi: 10.7527/S1000-6893.2016.0063
2016, (7): 2276-2285.
PDF [ 5651 K ]( 415 ) HTML
Wind identification and application of powered parafoil system
TAN Panlong, SUN Qinglin, GAO Haitao, CHEN Zengqiang
doi: 10.7527/S1000-6893.2016.0091
2016, (7): 2286-2294.
PDF [ 4717 K ]( 549 ) HTML
Feature-based uncut region tool path optimization method for skin parts machined by mirror milling system
LIU Shaowei, LI Yingguang, HAO Xiaozhong, LIU Changqing, XIANG Bingfei
doi: 10.7527/S1000-6893.2015.0240
2016, (7): 2295-2302.
PDF [ 26912 K ]( 708 ) HTML
Mechanical properties of K-cor sandwich composite under hygrothermal environment
SHEN Yufeng, LI Yong, WANG Xin, HUAN Dajun
doi: 10.7527/S1000-6893.2015.0251
2016, (7): 2303-2311.
PDF [ 7902 K ]( 696 ) HTML
Riveting force computation model based on formed head inhomogeneous deformation
CHANG Zhengping, WANG Zhongqi, WANG Binbin, KANG Yonggang, LUO Qun
doi: 10.7527/S1000-6893.2016.0043
2016, (7): 2312-2320.
PDF [ 5363 K ]( 549 ) HTML
Influence of stiffness on thrust force and exit burr in drilling titanium plates
LUO Bin, ZHANG Kaifu, LI Yuan, CHENG Hui, LIU Shunuan
doi: 10.7527/S1000-6893.2016.0097
2016, (7): 2321-2330.
PDF [ 7296 K ]( 706 ) HTML
Academic Quality
Download Ranking