[1] LIU C C, JING X J, DALEY S, et al. Recent advances in micro-vibration isolation[J]. Mechanical Systems and Signal Processig, 2015, 56-57:55-80.
[2] AGLIETTI G S, LANGLEY R S, ROGERS E, et al. Model building and verification for active control of micro-vibrations with probabilistic assessment of the effects of uncertainties[J]. Proceedings of the Institution of Mechanical Engineers-Part C, 2004, 218(4):389-399.
[3] 倪振华. 振动力学[M]. 西安:西安交通大学出版社,1989:108-111. NI Z H. Mechanical vibrations[M]. Xi'an:Xi'an Jiaotong University Press, 1989:108-111(in Chinese).
[4] 路纯红, 白鸿柏. 新型超低频非线性被动隔振系统的设计[J]. 振动与冲击, 2011, 30(1):234-236. LU C H, BAI H B. A new type nonlinear ultra-low frequency passive vibration isolation system[J]. Journal of Vibration and Shock, 2011, 30(1):234-236(in Chinese).
[5] 彭献, 黎大志. 准零刚度隔振器及其弹性特性设计[J]. 振动. 测试与诊断, 1997, 17(4):44-46. PENG X, LI D Z. Quasi-zero stiffness vibration isolators and design for their elastic characteristics[J]. Journal of Vibration, Measurement & Diagnosis, 1997, 17(4):44-46(in Chinese).
[6] 彭献, 陈树年, 宋福磐. 负刚度的工作原理及应用初探[J]. 湖南大学学报(自然科学版), 1992, 19(4):89-94. PENG X, CHEN S N, SONG F P. Research on theory of negative stiffness and its application[J]. Journal of Hunan University (Natural Sciences), 1992, 19(4):89-94(in Chinese).
[7] 彭献, 唐驾时. 非线性隔振理论初探[J]. 振动与冲击, 1996, 15(4):13-17. PENG X, TANG J S. Research on the theory of nonlinear vibration isolation[J]. Journal of Vibration and Shock, 1996, 15(4):13-17(in Chinese).
[8] CARRELLA A, BRENNAN M J, KOVACIC I, et al. On the force transmissibility of a vibration isolator with quasi-zero-stiffness[J]. Journal of Sound and Vibration, 2009, 322(4):707-717.
[9] 刘兴天, 孙靖雅, 肖锋, 等. 准零刚度微振动隔振器的原理和性能研究[J]. 振动与冲击, 2013, 32(21):69-73. LIU X T, SUN J Y, XIAO F, et al. Principle and performance of a quasi-zero stiffness isolator for micro-vibration isolation[J]. Journal of Vibration and Shock, 2013, 32(21):69-73(in Chinese).
[10] 徐道临, 成传望, 周加喜. 屈曲板型准零刚度隔振器的设计和特性分析[J]. 湖南大学学报(自然科学版), 2014, 41(8):17-22. XU D L, CHENG C W, ZHOU J X. Design and characteristic analysis of a bucking plate vibration isolator with quasi-zero-stiffness[J]. Journal of Hunan University (Natural Sciences), 2014, 41(8):17-22(in Chinese).
[11] CARRELLA A, BRENNAN M J, WATERS T P, et al. On the design of a high-static-low-dynamic stiffness isolator using linear mechanical springs and magnets[J]. Journal of Sound and Vibration, 2008, 315(3):712-720.
[12] WU W J, CHEN X D, SHAN Y H. Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness[J]. Journal of Sound and Vibration, 2014, 333(13):2958-2970.
[13] 冯慈璋, 马西奎, 工程电磁场导论[M]. 北京:高等教育出版社, 2000:92-93. FENG C Z, MA X K. Introduction to electromagnetic field[M]. Beijing:Higher Education Press, 2000:92-93(in Chinese).
[14] FURLANI E P. Permanent magnet and electromechanical devices:Materials, analysis, and applications[M]. Salt Lake City, UT:Academic Press, 2001:126-128.
[15] 聂帅, 王文瑞, 张佳明. 斯特林制冷机渐开线型中涡旋柔性弹簧强度研究[J]. 低温工程, 2014(3):62-66. NIE S, WANG W R, ZHANG J M. Strength study on spiral flexure spring based involute curve of stirling crycooler[J]. Cryogenics, 2014(3):62-66(in Chinese).
[16] 袁重雨, 陈曦, 刘颖, 等. 三种不同型线柔性弹簧的有限元分析及对比研究[J]. 低温与超导, 2011, 39(7):21-24. YUAN C Y, CHEN X, LIU Y, et al. Finite element analysis of three molded lines of flexure spring[J]. Cryogenics & Superconductivity, 2011, 39(7):21-24(in Chinese). |