2A12-T4铝合金自冲摩擦铆焊接头力学行为研究

doi:10.7527/S1000-6893.2021.25111

Abstract

Abstract: To solve the problem of low joining efficiency caused by the prefabricated hole process in interference fit riveting, the friction self-piercing riveting (F-SPR) process is adopted. By using the friction heat generated from high-speed rotation of the semi-hollow rivet for material softening, a mechanical-solid state hybrid joint is achieved without prefabricated holes. Firstly, an appropriate conversion depth of the F-SPR process is determined according to joint forming quality. Then, the microstructure characteristics of typical joints are analyzed, and the influence of feed rate on the macro morphology, hardness distribution as well as joint mechanical properties are studied. The results show that when the conversion depth is 3.5 mm, the defects such as burrs, gaps, insufficient flaring, and cracks can be effectively eliminated. After the F-SPR process, the rivet and the sheets achieved tight connection. The feed rate mainly affected the hardness of the base material in the joint, and then the tensile-shear and cross-tension strength of the joint. The tensile-shear strength of the F-SPR joint can reach about 80% of the tensile strength of the 2A12-T4 aluminum alloy material, showing that the F-SPR joint has great advantages over the joints made by the electromagnetic riveting and the automatic pressure riveting processes.

Key words: friction self-piercing riveting (F-SPR), mechanical-solid state hybrid joining, 2A12 aluminum alloy, mechanical property, tensile-shear, cross-tension

CLC Number:

V261.94

YANG Bingxin, MA Yunwu, SHAN He, YANG Tianhao, SUN Jing, LI Yongbing. Mechanical performance of friction self-piercing riveted joint for 2A12-T4 aluminum alloy[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625111-625111.

References

[1] NIE B H, ZHENG Z, ZHAO Z H, et al. Effect of anodizing treatment on the very high cycle fatigue behavior of 2A12-T4 aluminum alloy[J].Materials & Design, 2013, 50:1005-1010.
[2] ZHANG Z H, LI W Y, LI J L, et al. Effective predictions of ultimate tensile strength, peak temperature and grain size of friction stir welded AA2024 alloy joints[J].The International Journal of Advanced Manufacturing Technology, 2014, 73(9-12):1213-1218.
[3] 王仲奇,常正平,郭飞燕,等. 大型飞机壁板无头铆钉干涉连接技术[J].航空制造技术, 2015(4):34-39. WANG Z Q, CHANG Z P, GUO F Y, et al. Interference fit technology of slug rivet in large aircraft panel[J].Aeronautical Manufacturing Technology, 2015(4):34-39(in Chinese).
[4] 常正平,王仲奇,王斌斌,等. 基于镦头不均匀变形的压铆力建模[J].航空学报, 2016, 37(7):2312-2320. CHANG Z P, WANG Z Q, WANG B B, et al. Riveting force computation model based on formed head inhomogeneous deformation[J].Acta Aeronautica et Astronautica Sinica, 2016, 37(7):2312-2320(in Chinese).
[5] 左杨杰,曹增强,杨柳,等. 基于对称加载的均匀干涉配合铆接方法[J].航空学报, 2016, 37(3):1049-1059. ZUO Y J, CAO Z Q, YANG L, et al. Interference-fit evenness riveting method based on symmetrical loading[J].Acta Aeronautica et Astronautica Sinica, 2016, 37(3):1049-1059(in Chinese).
[6] 李奕寰,曹增强,张岐良,等. 铆模倾角对铆接质量的影响研究[J].航空学报, 2013, 34(2):426-433. LI Y H, CAO Z Q, ZHANG Q L, et al. Effect study on riveting quality with different angles of riveting die[J].Acta Aeronautica et Astronautica Sinica, 2013, 34(2):426-433(in Chinese).
[7] DONG Y D, SUN L Q, WANG Q, et al. Influence of electromagnetic riveting process on microstructures and mechanical properties of 2A10 and 6082 Al riveted structures[J].Archives of Civil and Mechanical Engineering, 2019, 19(4):1284-1294.
[8] HOENSCH F, DOMITNER J, SOMMITSCH C. Modeling the failure behavior of self-piercing riveting joints of 6xxx aluminum alloy[J].Journal of Materials Engineering and Performance, 2020, 29(8):4888-4897.
[9] CAI W, WANG P C, YANG W. Assembly dimensional prediction for self-piercing riveted aluminum panels[J].International Journal of Machine Tools & Manufacture, 2005, 45(6):695-704.
[10] SADOWSKI T, KNEC M. Application of DIC technique for monitoring of deformation process of SPR hybrid joints[J].Archives of Metallurgy and Materials, 2013, 58(1):119-125.
[11] DURANDET Y, DEAM R, BEER A, et al. Laser assisted self-pierce riveting of AZ31 magnesium alloy strips[J].Materials & Design, 2010, 31:S13-S16.
[12] ZHAO X Z, MENG D, ZHANG J Y, et al. The effect of heat treatment on die casting aluminum to apply self-pierce riveting[J].International Journal of Advanced Manufacturing Technology, 2020, 109:2409-2419.
[13] JAECKEL M, GRIMM T, LANDGREBE D. Approaches for mechanical joining of 7xxx series aluminum alloys[C]//Proceedings of the 19th International ESAFORM Conference on Material Forming, 2016.
[14] WANG J W, LIU Z X, SHANG Y, et al. Self-piercing riveting of wrought magnesium AZ31 sheets[J].Journal of Manufacturing Science and Engineering-Transactions of the ASME, 2011, 133(3):031.
[15] 陆轶,赵运强,董春林,等. 6061-T6铝合金搅拌摩擦点焊接头微观组织与力学性能研究[J].热加工工艺, 2020, 49(5):12-24. LU Y, ZHAO Y Q, DONG C L, et al. Study on microstructure and mechanical Properties of 6061-T6 aluminum alloy friction stir spot welded joint[J].Hot Working Technology, 2020, 49(5):12-24(in Chinese).
[16] 黄永宪, 吕宗亮, 万龙, 等. 钛/铝异质金属搅拌摩擦焊技术研究进展[J].航空学报, 2018, 39(11):022154. HUANG Y X, LYU Z L, WAN L, et al. Review of dissimilar friction stir welding between titanium and aluminum[J].Acta Aeronautica et Astronautica Sinica, 2018, 39(11):022154(in Chinese).
[17] LI Z W, YUE Y M, JI S D, et al. Optimal design of thread geometry and its performance in friction stir spot welding[J].Materials & Design, 2016, 94:368-376.
[18] LIU H J, ZHAO Y Q, SU X Y, et al. Microstructural characteristics and mechanical properties of friction stir spot welded 2A12-T4 aluminum alloy[J].Advances in Materials Science and Engineering, 2013, 2013:719306.
[19] SCHILLING C, DOS S J. Method and device for linking at least two adjoining work pieces by friction welding:European. EP1230062A1[P]. 2002.
[20] LI G H, ZHOU L, WU X M, et al. Microstructural evolution and mechanical properties of refill friction stir spot welded alclad 2A12-T4 aluminum alloy[J].Journal of Materials Research and Technology, 2019, 8(5):4115-4129.
[21] Li Y B, WEI Z Y, WANG Z Z, et al. Friction self-piercing riveting of aluminum alloy AA6061-T6 to magnesium alloy AZ31B[J].Journal of Manufacturing Science and Engineering, 2013, 135(6):061007.
[22] LIU X, LIM Y C, LI Y X, et al. Effects of process parameters on friction self-piercing riveting of dissimilar materials[J].Journal of Materials Processing Technology, 2016, 237:19-30.
[23] MA Y W, HE G Z, LOU M, et al. Effects of process parameters on crack inhibition and mechanical interlocking in friction self-piercing riveting of aluminum alloy and magnesium alloy[J].Journal of Manufacturing Science and Engineering, 2018, 140(10):101015.
[24] MA Y W, LI Y B, LIN Z Q. Joint formation and mechanical performance of friction self-piercing riveted aluminum alloy AA7075-T6 joints[J].Journal of Manufacturing Science and Engineering, 2019, 141(4):041005.
[25] MA Y W, YANG B X, LOU M, et al. Effect of mechanical and solid-state joining characteristics on tensile-shear performance of friction self-piercing riveted aluminum alloy AA7075-T6 joints[J].Journal of Materials Processing Technology, 2020, 278:116543.
[26] 李永兵, 马运五, 楼铭, 等. 用于自冲摩擦铆焊的铆钉及其自冲摩擦铆焊连接系统:中国, ZL201610566456.3[P]. 2018-04-10. LI Y B, MA Y W, LOU M, et al. Rivet design and system development of the friction self-pierced riveting process. China, ZL201610566456.3[P]. 2018-04-10.
[27] 陈高强,史清宇. 搅拌摩擦焊中材料流动行为数值模拟的研究进展[J].机械工程学报, 2015, 51(22):11-21. CHEN G Q, SHI Q Y. Recent Advances in numerical simulation of material flow behavior during frictions stir welding[J].Journal of Mechanical Engineering, 2015, 51(22):11-21(in Chinese).
[28] KILPATRICK W, BROWN D, MCMURRAY R J, et al. The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration[J].Materials Science and Engineering:A, 2010, 527(29-30):7557-7564.
[29] 王浩一,曹增强,梁琳,等. 基于手持式电磁铆接设备的无头铆钉干涉配合铆接工艺研究[J].机械科学与技术, 2010, 29(8):1017-1020. WANG H Y, CAO Z Q, LIANG L, et al. On headless rivet interference-fit riveting based on hand-held electromagnetic riveting equipment[J].Mechanical Science and Technology for Aerospace Engineering, 2010, 29(8):1017-1020(in Chinese).

Mechanical performance of friction self-piercing riveted joint for 2A12-T4 aluminum alloy

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LIU Zengfei, LIU Kai, ZHANG Binbin, LI Xuefeng, GE Jingran, HUANG Jian, LI Chao, SUN Xinyang, SUN Yu, LIANG Jun. Effect of yarn size on tensile properties of 3D woven composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 525453-525453.
[2]	ZHAO Tian, LI Ying, ZHANG Chao, YAO Liaojun, HUANG Yixing, HUANG Zhixin, CHEN cheng, WANG Wandong, ZU Lei, ZHOU Huamin, QIU Jinhao, QIU Zhiping, FANG Daining. Fundamental mechanical problems in high-performance aerospace composite structures: State-of-art review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526851-526851.
[3]	WANG Miao, WANG Wei, YANG Yunlong, TAN Caiwang, WANG Gang. Effect of brazing time on microstructure and properties of SiC ceramic brazed with CoFeNiCrCu [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525057-525057.
[4]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.
[5]	ZHAO Kehan, LIU Duo, ZHU Haitao, CHEN Bin, HU Shengpeng, SONG Xiaoguo. Effect of brazing temperature on microstructure and mechanical property of C/C/AgCuTi+C_f/TC4 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525007-525007.
[6]	LU Chuanyang, CHEN Gangqiang, TANG Xiatao, HE Yanming, YANG Jianguo, ZHENG Wenjian, MA Yinghe, LI Huaxin, GAO Zengliang. Microstructure and mechanical properties of Hastelloy N superalloy joints brazed using BNi71CrSi filler alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625040-625040.
[7]	LI Xiaopeng, HAN Rui, QIAN Xusheng, ZHANG Binggang, WANG Kehong. Effect of adding boron element on microstructure and shear strength of Ni-25at%Si/Ti600 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625069-625069.
[8]	SHEN Gaofeng, WANG Zhenjun, LIU Fenghua, ZHANG Yingfeng, CAI Changchun, XU Zhifeng, YU Huan. Quasi-static tensile behavior and failure mechanism of laminated puncture CF/Al composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 424816-424816.
[9]	CHEN Xiangming, YAO Liaojun, GUO Licheng, SUN Yi. 3D printed continuous fiber-reinforced composites: State of the art and perspectives [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524787-524787.
[10]	CHENG Hui, FAN Xintian, XU Guanhua, YANG Yu, WANG Lan. State of the art of precise interference-fit technology for composite structures in aircraft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524876-524876.
[11]	WANG Cunxian, GAO Haomai, GONG Xu, SUO Tao, LI Yulong, TANG Zhongbin, XUE Pu, HOU Liang, LIN Jiajian. Impact responses of aeronautic riveting structures [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(1): 522484-522484.
[12]	WANG Xin, LI Yong, HUAN Dajun, CHEN Haoran, ZHANG Xiangyang. Ultrasonic-assisted in-situ placement of CF/PEEK composite and its mechanical properties [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(9): 422021-422029.
[13]	HUANG Yongxian, LYU Zongliang, WAN Long, MENG Xiangchen, CAO Jian. Review of dissimilar friction stir welding between titanium and aluminum [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(11): 22154-022154.
[14]	LIU Zhenguo, HUANG Xiang, YA Jixuan, LEI Bing, LI Xiaokang, CHENG Xin. Cut-edge effect of three-dimensional full five-directional braided composites [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(8): 220885-220885.
[15]	CHEN Yuelian, WANG Zhefu, BIAN Guixue, WANG Chenguang, ZHANG Yong. Equivalent conversion of galvanic corrosion of typical aluminum-titanium alloy in NaCl solution with different concentrations [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(3): 420450-420450.