| [1] |
LIN Aqiang, LIU Gaowen, WU Heng, CHANG Ran, FENG Qing.
Mechanism and theoretical analysis of pressure ratio and entropy increase in a pre-swirl system of gas turbine engine
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 125907-125907.
|
| [2] |
ZHANG Donghui, ZHANG Taihua, CUI Yanxiang, CHEN Chen, WANG Sheng.
Sensitivity analysis of aerodynamic parameters of stratospheric tethered balloon
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 125083-125083.
|
| [3] |
YANG Baofeng, LI Bin, CHEN Hui, LIU Zhanyi.
Matching effect between inducer and impeller in a liquid rocket engine propellant pump
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(5): 122609-122609.
|
| [4] |
LI Wenlong, WANG Gang, YIN Zhouping.
5-axis onsite inspection path generation and experimental verification of enclosed impeller
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(3): 421474-421474.
|
| [5] |
SHAO Gan, ZHANG Shuguang, TANG Peng.
HGAPSO: A new aerodynamic parameters identification algorithm for small unmanned aerial vehicles
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(4): 120365-120365.
|
| [6] |
HAN Feiyan, ZHANG Dinghua, WU Baohai, LUO Ming, ZHANG Xiaodong.
High-efficiency section-by-section slotting method for 4+1-axis NC machining of high-wrap impeller channel
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(5): 1684-1694.
|
| [7] |
WANG Fuyuan, ZHAO Jianshe.
Processing method of blade root of blisk based on principle of electrochemical sweep shaping
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(10): 3457-3464.
|
| [8] |
DONG Lei, CAO Lixin.
Approximation Method of Tunnel Surfaces with General Cylindrical Surfaces and Its Application in Plunge Milling of Impellers
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(8): 2331-2340.
|
| [9] |
ZHU Yu, NING Tao, CHEN Zhitong.
Kinematic Analysis of Cylindrical Coordinate CNC Machine in Integral Impeller Machining
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(8): 2364-2374.
|
| [10] |
XU Zhongda, SU Yuan, CAO Yihua.
Effects of Tailplane Icing on Aircraft Longitudinal Aerodynamic Parameters
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(7): 1563-1571.
|
| [11] |
ZHAO Jianshe, WANG Fuyuan, XU Jiawen, LIU Yujie.
Research on Electrochemical Machining Process for Fine Finishing of Integral Impeller with Free-form Surface Blade
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(12): 2841-2848.
|
| [12] |
WEI Baofeng, JIN Donghai, GUI Xingmin.
Numerical Simulation of Impeller-diffuser Interaction in Centrifugal Compressor
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, 33(7): 1173-1180.
|
| [13] |
YU Ming, LIU Yongshou, LI Lei, LI Yuansheng, YUE Zhufeng.
Reliability-based Multidisciplinary Design Optimization of Centrifugal Impeller with Double-loop Strategy
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, (4): 650-657.
|
| [14] |
Liu Chen;Xu Jiawen;Zhao Jianshe;Wu Rui.
Research of Combined Electrical Machining of 3D-flow Closed Impellers Ⅲ—Key Techniques of Numerically Controlled Electron Discharge Machining for Precision Work
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(6): 1299-1304.
|
| [15] |
Liu Chen;Xu Jiawen;Zhao Jianshe;Wu Rui.
Research of Combined Electrical Machining of 3D-flow Closed Impeller Ⅱ —Numerically Controlled Electrochemical Machining for Pre-processing
[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(4): 871-876.
|
CJA
