渗氢处理细化Ti－10V－2Fe－3Al合金组织及改善其超塑性性能的效果

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 1994, Vol. 15 ›› Issue (7): 882-886.

• 论文 • Previous Articles Next Articles

EFFECTS OF HYDROGENATION TREATMENTS ON THE MICROSTTUCTURAL REFINEMENT AND SUPERPLASTIC BEHAVIOR OF THE Ti-10V-2Fe-3Al ALLOY

Du Zhongquan¹, Wang Gaochao¹, Chen Yuxiu¹, Zhang Zhifang²

1. Department of Materials,Nanchang Institute of Aeronautical Technology,Nanchang,330034;2. Aeronautical Materials Research Institute, Beijing, 100095

Received:1992-04-28 Revised:1992-12-10 Online:1994-07-25 Published:1994-07-25

Abstract

Abstract: This paper is aimed at investigating the effects of using hydrogen as a temporary al-loying element in Ti-10V-2Fe-3Al alloy on its microstructural refinement and superplastic be-havior.Firstly,the metallographic inspections and the hydrogen content analysis are used to optimize the hyd rogenation treatment regimes to refine the microstructures of the Ti-10V-2Fe-3Al alloy.Secondly an orthogonal test layout is arranged to determine the changes in the microstructures and the superplastic behavior ofthis alloy before and after the treatment in combination with its starting structure.

Key words: hydrogenation, titanium alloys, superplasticity

CLC Number:

Du Zhongquan;Wang Gaochao;Chen Yuxiu;Zhang Zhifang. EFFECTS OF HYDROGENATION TREATMENTS ON THE MICROSTTUCTURAL REFINEMENT AND SUPERPLASTIC BEHAVIOR OF THE Ti-10V-2Fe-3Al ALLOY[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1994, 15(7): 882-886.

[1]	YANG Huanping, ZHUANG Wei, WANG Yaomian, YAN Wenbin. Influence of severe plastic deformation on thermal oxidation of titanium alloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 424656-424656.
[2]	DING Wenfeng, XI Xinxin, ZHAN Jinghua, XU Jiuhua, FU Yucan, SU Honghua. Research status and future development of grinding technology of titanium materials for aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 22763-022763.
[3]	LUO Bin, ZHANG Kaifu, LI Yuan, CHENG Hui, LIU Shunuan. Influence of stiffness on thrust force and exit burr in drilling titanium plates [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(7): 2321-2330.
[4]	GUO Lianggang, YANG He, DI Weijia, CHEN Fulong, ZHU Shuai. Filling rules in thin-walled and ribbed conical ring rolling for TC4 titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(8): 2798-2806.
[5]	WU Xinchen, CHEN Minghe, XIE Lansheng, ZHANG Tielei, HU Zhihua. Twist-bend forming of aeroengine titanium TC4 wide-chord hollow fan blade with complex geometries [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(6): 2055-2063.
[6]	LIU Zhidong, YIN Chunjing, QIU Mingbo, TIAN Zongjun. Titanium alloy controllable melting and explosion efficient turning induced by EDM [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(3): 995-1001.
[7]	LIU Jianhua, YANG Kang, YU Mei, LI Songmei, WU Liang, YU Xiumei. Preparation, Characterization and Fatigue Performance of Anodic Oxide Film on Titanium Alloy TC18 in Sodium Tartrate Electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(3): 902-910.
[8]	ZHU Shuai, YANG He, GUO Lianggang, DI Weijia, FAN Yu. Simulation of Microstructure Evolution During the Whole Process of Radial-axial Rolling of TA15 Titanium Alloy Ring [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(11): 3145-3155.
[9]	CHEN Yan, YANG Shubao, FU Yucan, XU Jiuhua, SU Honghua. FEM Estimation of Tool Wear in High Speed Cutting of Ti6Al4V Alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(9): 2230-2240.
[10]	HE Qingshan, FU Yucan, XU Hongjun, MA Ke, CHEN Chen. Development of Annular Heat Pipe Grinding Wheel for High Efficiency Machining of TC4 Titanium Alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(7): 1740-1747.
[11]	GUO Lianggang, CHEN Jianhua, YANG He, GU Ruijie. Response Rules of Strain and Temperature Fields to Roll Sizes During Hot Rolling Process of TC4 Titanium Alloy Conical Ring [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(6): 1463-1473.
[12]	CHEN Longhai, LIU Zhidong, QIU Mingbo, TIAN Zongjun, YIN Chunjing. Technical Research of Combined Machining of TC4 Titanium Alloy by EDM Induced Controllable Combustion and Turning Dressing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(11): 2626-2634.
[13]	WANG Xiangzhi, LIU Zhidong, XUE Rongyuan, TIAN Zongjun, HUANG Yinhui. Research on Self-mixed Oxygen in Discharge Gap to Improve the Processing Characteristics of Titanium Alloy Electrical Discharge Machining [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(10): 2419-2426.
[14]	HANG Chao, YANG Guang, LI Yulong, YU Qifeng, GUO Yazhou. Application of Digital Image Correction Method to Test of Mechanical Properties for Weld Materials [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(10): 2372-2382.
[15]	WANG Yaoqi, HOU Hongliang, SUN Zhonggang. Plastic Effect of Hydrogenated Ti-6Al-4V Alloy and Its Application [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011, 32(8): 1563-1568.

EFFECTS OF HYDROGENATION TREATMENTS ON THE MICROSTTUCTURAL REFINEMENT AND SUPERPLASTIC BEHAVIOR OF THE Ti-10V-2Fe-3Al ALLOY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments