数字图像相关方法在焊缝材料力学性能测试中的应用

doi:10.7527/S1000-6893.2013.0163

Abstract

Abstract:

Weld material is a kind of non-uniform material with the weld, parent material and the heat affected zone possessing different mechanical properties. It is important that the mechanical features of the diverse zones in a weld material are quantitatively investigated in order to reasonably apply it in engineering. This paper uses digital image correlation (DIC) method to measure the deformation field of a TC4 titanium alloy weld under uniaxial extension loading. The strain fields of different areas are obtained under different loads. The parent material zone, weld zone and heat affected zone are each characterized by the strain of its area in a descending order. The strain of the parent material zone is found to be much greater than that of other zones. The local failure strain of the parent material can reach 30%, which means the ductility of the parent material is fine. Then the transformative localization behavior is measured during the loading process. At the peak load, tiny necking of 0.075 mm is formed, while necking reaches 0.271 mm when the specimen fractures. Finally, the error of the test system is also analyzed, from which the reliability of the DIC method is verified.

Key words: digital image correlation, titanium alloys, weld, parent material zone, heat affected zone, mechanical properties

CLC Number:

V250.2

HANG Chao, YANG Guang, LI Yulong, YU Qifeng, GUO Yazhou. Application of Digital Image Correction Method to Test of Mechanical Properties for Weld Materials[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(10): 2372-2382.

References

[1] Yin X H. Status quo and trend of electric welding machine industry. Electrical Equipment Industry, 2005(5): 13-16. (in Chinese) 尹显华. 电焊机行业现状及发展趋势. 电器工业, 2005(5): 13-16.

[2] Sharpe W N, Yuan B, Vaidyanathan R, et al. Measurements of Young's modulus, Poisson's ratio, and tensile's strength of polysilicon. Proceedings of the Tenth IEEE International Workshop on Microelectromechanical Systems, 1997: 424-429.

[3] Zhu M H, Xu F, Tang Z B, et al. Application of ISDG method on mechanical properties measurement of welding line material. Chinese Quarterly of Mechanics, 2006, 27(3): 515-521. (in Chinese) 朱勐晖, 徐绯, 汤忠斌, 等. 干涉应变计法在焊缝材料力学性能测试中的应用. 力学季刊, 2006, 27(3): 515-521.

[4] Lei B L. Correlation between the micro shear test and conventional test. Journal of Southwest Jiaotong University, 1992(3): 67-73. (in Chinese) 雷斌隆. 微型剪切试验与常规试验之间的关系. 西南交通大学学报, 1992(3): 67-73.

[5] Lei B L, Chen H, Quan S Y. Correlations between micro-shear test and mechanical properties test of welded joint. Electric Welding Machine, 2006, 36(8): 40-42. (in Chinese) 雷斌隆, 陈辉, 权思勇. 焊接接头微型剪切试验与机械性能试验之间的关系. 电焊机, 2006, 36(8): 40-42.

[6] Wang Y L, Sun H, Liu J A. Research on mechanical properties test of weld joint microzones of aluminum alloy. Aluminum Machining, 1997, 19(3): 35-38. (in Chinese) 王元良, 孙鸿, 刘静安. 铝合金焊接接头微区性能试验研究. 铝加工, 1997, 9(3): 35-38.

[7] Tang Z B, Xu F, Xu Z J, et al. Research on mechanical properties of micro-zones of welding line. Journal of Mechanical Strength, 2010, 32(1): 58-63. (in Chinese) 汤忠斌, 徐绯, 许泽建, 等. 焊缝结构微区材料力学性能研究. 机械强度, 2010, 32(1): 58-63.

[8] Jin G C. Computer aided optical measurement. 2nd ed. Beijing: Tsinghua University Press, 2007: 141-170. (in Chinese) 金观昌. 计算机辅助光学测量. 2版. 北京: 清华大学出版社, 2007: 141-170.

[9] Pan B, Qian K M, Xie H M, et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Measurement Science and Technology, 2009, 20(6): 62001.

[10] Wang H W, Kang Y L, Xie H P. Advance in digital speckle correlation method and its application. Advances in Mechanics, 2005, 35(2): 195-203. (in Chinese) 王怀文, 亢一澜, 谢和平. 数字散斑相关方法与应用研究进展. 力学进展, 2005, 35(2): 195-203.

[11] Yu Q F. Image based precise measurement and motion measurement. Beijing: Science Press, 2002: 147-155. (in Chinese) 于起峰. 基于图像的运动测量与精密测量. 北京: 科学出版社, 2002: 147-155.

[12] Bruck H A, McNeill S R, Sutton M A, et al. Digital image correlation using Newton-Raphson method of partial differential correction. Experimental Mechanics, 1989, 29(3): 261-267.

[13] Vendroux G, Knauss W G. Submicron deformation field measurement: Part 2, improved digital image correlation. Experimental Mechanics 1998, 38(2): 86-92.

[14] Pan B, Xie H M, Xu B Q. Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method. Acta Optica Sinica, 2007, 27(11): 1980-1986. (in Chinese) 潘兵, 谢惠民, 续伯钦. 数字图像相关中基于位移场局部最小二乘拟合的全场应变测量. 光学学报, 2007, 27(11): 1980-1986.

[15] Zhong Y, Qu J S, Chen W J, et al. Electron beam welding of TC4 alloy. Hot Working Technology, 2007, 36(15): 24-26. (in Chinese) 钟玉, 屈金山, 陈文静, 等. TC4钛合金的电子束焊. 热加工工艺, 2007, 36(15): 24-26.

[16] Peng Z, Goodson K E. Subpixel displacement and deformation gradient measurement using digital image speckle correlation. Optical Engineering, 2001, 40(8): 1613-1620.

Application of Digital Image Correction Method to Test of Mechanical Properties for Weld Materials

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	LIU Huan, LIU Xiaojia, WANG Yufei, WANG Ning, CAO Lijun. Weld defect classification technology based on compound convolution neural network structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S1): 726928-726928.
[2]	LU Chuanyu, LU Minghui, LIU Haoyu, XU Xihao. Ultrasonicaliasing signal separation based on improved SL0 algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 425419-425419.
[3]	WANG Qiuyi, WU Yanzeng, BAO Rui. Analysis on CTOD corresponding parameters during fatigue crack growth [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526632-526632.
[4]	YU Liping, PAN Bing. Single-camera high-temperature three-dimensional digital image correlation method [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 527031-527031.
[5]	LI Zhiqiang, CHEN Wei. Application progress of power beam processing technology in aeronautical industry [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 526882-526882.
[6]	CHEN Bo, MENG Zheng, MA Chengyuan, XI Xin, WANG Xinxin, TAN Caiwang, SONG Xiaoguo. Welding properties and molten pool flow behavior of TC4 titanium alloy by oscillating galvanometer laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525223-525223.
[7]	ZHAO Yijin, GENG Jiabao, YANG Xiaodong. Inhibition method of heat affected zone in electrical discharge machining of CFRPs [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525660-525660.
[8]	XIAO Guijian, LIU Shuai, HE Yi, LIU Gang, ZHU Shengwang, SONG Shayu. Defocus control and surface topography of titanium alloy laser belt processing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525603-525603.
[9]	LIU Tianyuan, ZHENG Hangbin, YANG Changqi, BAO Jinsong, WANG Junliang, GU Jun. Explainable deep learning method for laser welding defect detection [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 524961-524961.
[10]	LI Xiaopeng, HAN Rui, QIAN Xusheng, ZHANG Binggang, WANG Kehong. Effect of adding boron element on microstructure and shear strength of Ni-25at%Si/Ti600 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625069-625069.
[11]	JIANG Chunyang, WU Lihui, CHANG Yunlong, XUE Peng, NI Dingrui, XIAO Bolv, MA Zongyi. Hybrid welding of riveting/friction stir lap joining of aluminum alloy to resin-based composite [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625190-625190.
[12]	LIU Hao, CHEN Yuhua, ZHANG Wentao. Microstructure characteristics of Ti/Al lap joints with pinless friction stir spot welding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624680-624680.
[13]	LIU Xiaochao, ZHEN Yunqian, HE Xinyuan, CHEN Haiyan, SHEN Zhikang. Vortex- friction stir welding process based on internal friction between identical materials [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625012-625012.
[14]	LI Hongliang, CUI Zhanxiang, LIU Shixiong, MA Qiang, YAO Yiqiang, LEI Yucheng. Acoustic-electric characteristics and process of ultrasonic-arc MIG welding of 6061 aluminum alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624969-624969.
[15]	SONG Gang, LIU Zhenfu, CHENG Jiwen, LIU Liming. Microstructure and properties of welding-rolling composite forming for 6061-T6 aluminum alloy by laser induced arc welding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625880-625880.