TC4钛合金电火花诱导可控烧蚀复合车削技术研究

doi:10.7527/S1000-6893.2013.0251

Abstract

Abstract:

Based on the flammability of titanium alloy, a new processing method for TC4 is proposed by combining the induction of electrical discharge with comburent oxygen and machining. The machining principle is that the controllable combustion induced by electrical discharge between the workpiece and combustion inducing electrode at the same time enables the turning tool to dress the combusted and softened layer of the workpiece formed by controllable combustion on-line. It establishes an inter-electrode dual dielectric discharge model of controllable combustion and turning dressing combined machining, analyses the gas and liquid dual dielectric liquid discharge mechanism between the combustion inducing electrode and workpiece, and compares the new method with electrical discharge machining and controllable combustion induced by electrical discharge machining. The test results show that the combined machining of controllable combustion induced by electrical discharge machining and turning dressing has the characteristics of high processing speed, good surface quality and low electrode wear.

Key words: electrical discharge, titanium alloys, controllable combustion, efficiency, combined machining

CLC Number:

CHEN Longhai, LIU Zhidong, QIU Mingbo, TIAN Zongjun, YIN Chunjing. Technical Research of Combined Machining of TC4 Titanium Alloy by EDM Induced Controllable Combustion and Turning Dressing[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(11): 2626-2634.

References

[1] Zhao W S.Advanced electrical discharge machining technology.Beijing: National Defense Industry Press,2003: 4-5.赵万生.先进电火花加工技术.北京: 国防工业出版社,2003: 4-5.

[2] Kunieda M,Yoshida M,Taniguchi N.Electrical discharge machining in gas.CIRP Annals-Manufacturing Technology,1997,46(1): 143-146.

[3] Zhang Q H,Zhang J H,Deng J X,et al.Ultrasonic vibration electrical discharge machining in gas.Journal of Materials Processing Technology,2002,129(1): 135-138.

[4] Tang C J,Kang X M,Zhao W S.Experimental study of submersed gas-jetting EDM.Electromachining & Mould,2008(3): 16-20.(in Chinese) 汤传建,康小明,赵万生.液中喷气电火花加工试验研究.电加工与模具,2008(3): 16-20.

[5] Tanimura T,Isuzugawa K,Fujita I,et al.Development of EDM in the mist.Proceedings of ISEM,1989,9: 313-316.

[6] Liu Z D.Metals controllable burning by EDM-induced efficient cutting technology: China,201110192863.2011-11-30.(in Chinese) 刘志东.电火花诱导可控烧蚀金属材料高效切削加工方法: 中国,201110192863.2011-11-30.

[7] Xia Y G,Gu L,Zhao W S.Developments and applications of dry-EDM and qqasi-dry-EDM.Electromachining & Mould,2007(6): 22-26.(in Chinese) 夏永高,顾琳,赵万生.干式和准干式电火花加工技术及应用.电加工与模具,2007(6): 22-26.

[8] Gunaji M V,Subhasish S,Beeson H D.Ignition and combustion of titanium and titanium alloys.ASTM Special Technical Publication,1995,1267: 81-85.

[9] Wang L,Liu Z D,Qiu M B,et al.Study of TC4 controllable burned grinding induced by electrical discharge.Acta Aeronautica et Astronautica Sinica,2012,33(8): 1524-1530.(in Chinese) 王琳,刘志东,邱明波,等.钛合金TC4电火花诱导可控烧蚀高效磨削技术研究.航空学报,2012,33(8): 1524-1530.

[10] Zhang M H.Theoretical basis of EDM.Beijing: National Defense Industry Press,1989: 53-54.(in Chinese) 张明辉.电火花加工理论基础.北京: 国防工业出版社,1989: 53-54.

[11] Liu J C,Bai J C,Guo Y F.Non-traditional machining.Beijing: China Machine Press,2009: 11-12.(in Chinese) 刘晋春,白基成,郭永丰.特种加工.北京: 机械工业出版社,2009: 11-12.

[12] Bai X,Zhang Q K,Li T T,et al.Research on the medium breakdown mechanism of powder mixed near dry electrical discharge machining.Journal of Mechanical Engineering,2012,48(7): 186-198.(in Chinese) 白雪,张勤河,李田田,等.混粉准干式电火花加工介质击穿机理研究.机械工程学报,2012,48(7): 186-198.

[13] Huang X,Cao C X,Ma J M,et al.Titanium combustion in aeroengines and fire-resistant titanium alloys.Journal of Materials Engineering,1997(8): 11-15.(in Chinese) 黄旭,曹春晓,马济民,等.航空发动机钛燃烧及阻燃钛合金.材料工程,1997(8): 11-15.

[14] Bolobov V I.Mechanism of self-ignition of titanium alloys in oxygen.Combustion,Explosion,and Shock Waves,2002,38(6): 639-645.

[15] Li L Q,Wang Z L,Zhao W S.Mechanism analysis of electrical discharge machining in gas.Journal of Harbin Institute of Technology,2004,36(3):359-362.(in Chinese) 李立青,王振龙,赵万生.气体放电加工机理分析.哈尔滨工业大学学报,2004,36(3): 359-362.

[16] Liu Y Q,Bai K W,Shen J Y,et al.Thermodynamic analysis of burn-resistance mechanism for Ti-Cr-V and Ti-Cr-Mo alloys.Chinese Journal of Rare Metals,1998,22(3): 204-207.(in Chinese) 刘玉芹,白克武,沈剑韵,等.Ti-Cr-V与Ti-Cr-Mo合金阻燃机理热力学分析.稀有金属,1998,22(3):204-207.

Technical Research of Combined Machining of TC4 Titanium Alloy by EDM Induced Controllable Combustion and Turning Dressing

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Yong CHEN, Weiliang KONG, Hong LIU. Challenge of aircraft design under operational conditions of supercooled large water droplet icing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 626973-626973.
[2]	Yijian MA, Delin CHAI, Qiang WANG, Xian YI, Manzhao KONG. Phase change and adhesion characteristics of ice crystal movements in wing icing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 627817-627817.
[3]	WANG Xiaoyue, WANG Xun, WANG Yongzhen, FEI Teng, LIU Dawei. Evaluation method for combat effectiveness of task-based simulated UAV swarm system [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S1): 726937-726937.
[4]	ZHANG Baozhen, WANG Hanping, XU Feng, WU Zhiqing. Simulation speed-up and accuracy compensation measures for adjusting mechanism of variable stator vane [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 226034-226034.
[5]	LIN Aqiang, LIU Gaowen, WU Heng, CHANG Ran, FENG Qing. Mechanism and theoretical analysis of pressure ratio and entropy increase in a pre-swirl system of gas turbine engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 125907-125907.
[6]	SUN Qixiang, WANG Wanbo, HUANG Yong. Oscillation characteristics of suction and oscillatory blowing actuator [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 125627-125627.
[7]	XIE Hua, LI Zihong, YANG Lei, ZHU Yongwen, LIU Fangzi. Optimization of four-dimensional trajectory of city pair with limited capacity [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 325581-325581.
[8]	GUO Jiahao, ZHOU Zhou, LI Xu. An efficient design method for blade of ducted propeller [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 125253-125253.
[9]	WU Xinlei, LIU Yonghong, QI Liang, ZHAO Lilong, JI Renjie. High-efficiency electrical discharge assisted arc milling of nickel-based superalloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525615-525615.
[10]	ZHAO Yijin, GENG Jiabao, YANG Xiaodong. Inhibition method of heat affected zone in electrical discharge machining of CFRPs [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525660-525660.
[11]	MU Hongpeng, LIU Zhidong, ZHOU Shuncheng, HAN Yunxiao, QIU Mingbo. Effects of different gap dielectric mode on EDM ablation milling [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525609-525609.
[12]	ZHOU Yan, LUO Zhenbing, WANG Lin, XIA Zhixun, GAO Tianxiang, XIE Wei, DENG Xiong, PENG Wenqiang, CHENG Pan. Plasma synthetic jet actuator for flow control: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 25027-025027.
[13]	LYU Yaguo, JIANG Le, GAO Xiaoguo, LIU Zhenxia, ZHU Pengfei, GAO Wenjun. Matching relationship between structural parameters and operating parameters of oil scoop blade for high-speed bearing with under-race lubrication [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 426037-426037.
[14]	YANG Liming, WU Jie, DONG Hao, DU Yinjie. Improved discrete velocity method based on unstructured mesh in velocity space and conservative correction [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 627033-627033.
[15]	CHANG Min, SUN Yang, BAI Junqiang, MENG Xiaoxuan. Aerodynamic design optimization of twice folding wing for tube-launched UAV constrained by flat-angle rotation mechanism [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(11): 526331-526331.