热处理对Bi超导带材微结构和J_C值的影响

Abstract

Abstract: The effects of heat treatment on the microstructure and the critical current density J_C of Ag-sheathed BiPbSrCaCuO(2223) superconducting tapes prepared by the powder-in-tube technique are investigated.The microstructure of oxide layer and the J_C values of the tape at 77K are strongly dependent on the heat treatment condition(temperature,time and cooling rate).The experimental results show that the optimum heat treatment temperature and cooling rate to maximize J_C values of the tape are in the range about 840-850℃ and 50-100℃/h respectively, and the J_C values of the tape increase with the prolongation of heat treatment time from 50h to 200h.If the temperature is higher than 850℃, the high Tc phase will partially go to melt.On the other hand, if the temperature is lower than 840℃,the high Tc phase might not completely form. Both of them reduce the J_C values of the tape. If the cooling rate is less than 50℃/h or greater than 100℃/h,the J_C values of the tape will also decrease.

Key words: high-temperature superconductors, heat treatment, microstructure, current density

CLC Number:

Liu Junhua. EFFECTS OF TREATMENT ON MICROSTRUCTURE AND CRITICAL CURRENT DENSITY OF Bi SERIES SUPERCONDUCTING TAPES[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1994, 15(4): 458-461.

[1]	Zheming FAN, Weizhu YANG, Yan ZENG, Zhenan ZHAO, Lei LI. Anisotropic tensile properties of GH4169 alloy repaired by laser direct energy deposition [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(8): 429129-429129.
[2]	Junfei TENG, Jiahao LI, Huiyan ZHOU, Dawei WU, Haitao XU, Tiesong LIN, Yongde HUANG. Effect of TLP diffusion welding process parameters on microstructure and mechanical properties of GH5188 superalloy joint [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(8): 429205-429205.
[3]	Fengqi WANG, Zhongqi YU, Yehui MENG, Tian GAN, Yixi ZHAO. Deformation mechanism and recrystallization microstructure evolution of aluminum stiffened cylinder during hot flow spinning based on numerical simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 627341-627341.
[4]	Nan ZHAO, Duosheng LI, Yin YE, Fencheng LIU, Wugui JIANG. Microstructure and properties of GH5188 alloy fabricated by selective laser melting [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(19): 428332-428332.
[5]	Yanting LIU, Jihui OU, Yufeng HAN, Jie CHEN. Effects of rectangular micro-scale structures on hypersonic rarefied shear flow [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(16): 127956-127956.
[6]	Gezhao NIU, Yanming LIU, Lan GAO, Tingkun ZHANG, Bowen BAI. Bistatic polarization scattering characteristic of plasma-sheath-covered blunt cone [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 97-105.
[7]	Jiahong NIU, Haonan JIA, Fajun YI, Zujun PENG, Wei CHEN. Low-pressure thermal stability and high-temperature electrical conductivity of dense amorphous SiCN [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(S2): 152-159.
[8]	WANG Miao, WANG Wei, YANG Yunlong, TAN Caiwang, WANG Gang. Effect of brazing time on microstructure and properties of SiC ceramic brazed with CoFeNiCrCu [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525057-525057.
[9]	ZHAO Kehan, LIU Duo, ZHU Haitao, CHEN Bin, HU Shengpeng, SONG Xiaoguo. Effect of brazing temperature on microstructure and mechanical property of C/C/AgCuTi+C_f/TC4 joint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525007-525007.
[10]	YANG Jiankai, GU Dongdong, GE Qing, TAN Chenchen, WEN Yu. Support layout and precise forming mechanism of aluminum alloy for laser additive manufacturing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525331-525331.
[11]	ZHANG Quanli, CHU Chenglong, ZHAI Jianchao, WANG Yukai, ZHANG Zhen, XU Jiuhua. Surface characteristics formation mechanism of ablated monocrystalline silicon by UV nanosecond pulsed laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525341-525341.
[12]	HU Xianliang, QIAO Hongchao, ZHAO Jibin, LU Ying, WU Jiajun, YANG Yuqi. Effect of laser shock wave on thermal corrosion resistance of single crystal alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525591-525591.
[13]	YANG Xiawei, PENG Chong, MA Tiejun, WEN Guodong, WANG Yanying, CHAI Xiaoxia, XU Yaxin, LI Wenya. Finite element analysis of fatigue crack growth of linear friction welded superalloy joints [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625004-625004.
[14]	LI Hongliang, CUI Zhanxiang, LIU Shixiong, MA Qiang, YAO Yiqiang, LEI Yucheng. Acoustic-electric characteristics and process of ultrasonic-arc MIG welding of 6061 aluminum alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 624969-624969.
[15]	CAI Xiaoqiang, WANG Dongpo, WANG Ying, YANG Zhenwen. Interfacial microstructure and mechanical properties of TiB₂-TiC-SiC ceramics joints fabricated by contact reactive brazing technique [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 625006-625006.

EFFECTS OF TREATMENT ON MICROSTRUCTURE AND CRITICAL CURRENT DENSITY OF Bi SERIES SUPERCONDUCTING TAPES

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments