自由曲面侧铣刀具轮廓与轨迹同步优化方法

doi:10.7527/S1000-6893.2020.23720

Abstract

Abstract: Aiming at the difficulties in toolpath planning and machining accuracy achievement in free-surface flank milling, this paper proposes a method for designing the tool contour of freeform generatrix. While optimizing the tool contour, this method fully considers the workpiece accuracy and tool axis smoothness during machining, thereby realizing the tool contour design and the flank milling path planning. This study first evaluates the machining error by calculating the interference between tool and workpiece on the cutting line after respectively defining the tool contour generatrix and tool axis trajectory surface to express the tool shape and flank milling path. The tool axis smoothness is also evaluated by tool axis trajectory energy, and a simultaneous optimization model of tool contour and machining trajectory based on the machining error and tool axis smoothness is established. Secondly, to solve the simultaneous optimization model, a solution strategy based on the successive approximation method is presented, and the method for acquiring the control parameters of the tool axis trajectory surface and the tool contour control parameters in the initial values are also provided. Finally, the path planning experiment and tool contour design experiment are designed respectively, verifying the correctness and effectiveness of the algorithm in the tool contour design and path optimization for 4-axis flank milling of freeform surface proposed in this paper. This research provides an effective method for both accuracy improvement in flank milling of freeform surface parts and realization of the tool contour design and path planning of flank milling.

Key words: freeform surface, flank milling, tool contour design, toolpath planning, simultaneous optimization methods, 4-axis machining

CLC Number:

V261
TP391.7

WANG Jing, LUO Ming, ZHANG Dinghua, CHEN Bing. Simultaneous optimization method for tool contour design and path planning of freeform surface flank milling[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 423720-423720.

References 28

[1]	吴宝海, 罗明, 张莹, 等. 自由曲面五轴加工刀具轨迹规划技术的研究进展[J]. 机械工程学报, 2008, 44(10):9-18. WU B H, LUO M, ZHANG Y, et al. Advances in tool path planning techniques for 5-axis machining of sculptured surfaces[J]. Journal of Mechanical Engineering, 2008, 44(10):9-18(in Chinese)
[2]	WANG X C, YU Y. An approach to interference-free cutter position for five-axis free-form surface side finishing milling[J]. Journal of Materials Processing Technology, 2002, 123(2):191-196.
[3]	曹利新, 吴宏基, 刘健. 基于五坐标数控圆柱形刀具线接触加工自由曲面的几何学原理[J]. 机械工程学报, 2003, 39(7):134-137. CAO L X, WU H J, LIU J. Geometrical theory of machining free form surface by cylindrical cutter in 5-axis NC machine tools[J]. Journal of Mechanical Engineering, 2003, 39(7):134-137(in Chinese)
[4]	吴宝海, 王尚锦. 基于正向杜邦指标线的五坐标侧铣加工[J]. 机械工程学报, 2006, 42(11):192-196. WU B H, WANG S J. 5-axis flank machining sculptured surface based on signed dupin indicatrix[J]. Journal of Mechanical Engineering, 2006, 42(11):192-196(in Chinese)
[5]	蔡永林, 席光, 樊宏周, 等. 任意曲面叶轮五坐标数控加工刀具轨迹生成[J]. 西安交通大学学报, 2003, 37(1):77-80. CAI Y L, XI G, FAN H Z, et al. Tool-path planning for 5-axis numerical control machining of arbitrary surface impeller[J]. Journal of Xi'an Jiaotong University, 2003, 37(1):77-80(in Chinese)
[6]	CAI Y L, XI G. Global tool interference detection in five-axis machining of sculptured surfaces[J]. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 2002, 216(10):1345-1353.
[7]	CAI Y L, XI G, WANG S J. Efficient tool path planning for five-axis surface machining with a drum-taper cutter[J]. International Journal of Production Research, 2003, 41(15):3631-3644.
[8]	李志强, 陈五一. 复杂曲面五坐标加工中主曲率匹配法的刃形误差[J]. 机械工程学报, 2006, 42(2):135-140. LI Z Q, CHEN W Y. Cutting edge error in principal axis mathod for five-axis machining of sculptured surfaces[J]. Journal of Mechanical Engineering, 2006, 42(2):135-140(in Chinese).
[9]	陈良骥, 王永章. 整体叶轮五轴侧铣数控加工方法的研究[J]. 计算机集成制造系统, 2007, 13(1):141-146. CHEN L J, WANG Y Z. Five-axis CNC flank milling method of integral impeller[J]. Computer Integrates Manufacturing Systems, 2007, 13(1):141-146(in Chinese).
[10]	HARIK R F, GONG H, BERNARD A. 5-axis flank milling:A state-of-the-art review[J]. Computer-Aided Design, 2013, 45(3):796-808.
[11]	BALA M, CHANG T C. Automatic cutter selection and optimal cutter path generation for prismatic parts[J]. International Journal of Production Research, 2007, 29(11):2163-2176.
[12]	CHEN Z C, FU Q. An optimal approach to multiple tool selection and their numerical control path generation for aggressive rough machining of pockets with free-form boundaries[J]. Computer-Aided Design, 2011, 43(6):651-663.
[13]	CHEN Z C, ZHANG H D. Optimal cutter size determination for 21/2-axis finish machining of NURBS profile parts[J]. International Journal of Production Research, 2009, 47(22):6279-6293.
[14]	ZHANG Y J, GE L L. Selecting optimal set of tool sequences for machining of multiple pockets[J]. International Journal of Advanced Manufacturing Technology, 2009, 42(3-4):233-241.
[15]	CHAVES-JACOB J, POULACHON G, DUC E. New approach to 5-axis flank milling of free-form surfaces:Computation of adapted tool shape[J]. Computer-Aided Design, 2009, 41(12):918-929.
[16]	LI C G, BEDI S, MANN S. Flank millable surface design with conical and barrel tools[J]. Computer-Aided Design and Applications, 2008, 5(5):461-470.
[17]	MONIES F, FELICES J N, RUBIO W, et al. Five-axis NC milling of ruled surfaces:Optimal geometry of a conical tool[J]. International Journal of Production Research, 2002, 40(12):2901-2922.
[18]	YAN D Q, ZHANG D H, LUO M. Optimization of barrel cutter for five-axis flank-milling based on approximation of tool envelope surface[J]. Computer-Aided Design and Applications, 2015, 12(6):1-10.
[19]	LUO M, YAN D Q, WU B H, et al. Barrel cutter design and toolpath planning for high-efficiency machining of freeform surface[J]. International Journal of Advanced Manufacturing Technology, 2015, 85(9-12):2495-2503.
[20]	LI T, CHEN W Y, XU R F, et al. Flank milling for blisk with a barrel ball milling cutter[J]. Key Engineering Materials, 2009, 407-408:202-206.
[21]	ZHENG G, ZHU L M, BI Q Z. Cutter size optimisation and interference-free tool path generation for five-axis flank milling of centrifugal impellers[J]. International Journal of Production Research, 2012, 50(23):1-12.
[22]	ZHU L M, DING H, XIONG Y L. Simultaneous optimization of tool path and shape for five-axis flank milling[J]. Computer-Aided Design, 2012, 44(12):1229-1234.
[23]	WU C Y. Arbitrary surface flank milling and flank sam in the design and manufacturing of jet engine fan and compressor airfoils[C]//ASME Turbo Expo 2012:Turbine Technical Con-ference and Exposition. New York:American Society of Mechanical Engineers Digital Collection, 2012:21-30.
[24]	WU C Y. Arbitrary surface flank milling of fan, compressor, and impeller blades[C]//ASME 1994 International Gas Turbine and Aeroen-gine Congress and Exposition. New York:American Society of Mechanical Engineers Digital Collection, 1994:534-539.
[25]	ARAS E. Generating cutter swept envelopes in five-axis milling by two-parameter families of spheres[J]. Computer-Aided Design, 2009, 41(2):95-105.
[26]	HU S M, LI Y F, JU T, et al. Modifying the shape of NURBS surfaces with geometric constraints[J]. Computer-Aided Design, 2001, 33(12):903-912.
[27]	POURAZADY M, XU X. Direct manipulations of NURBS surfaces subjected to geometric constraints[J]. Computers & Graphics, 2006, 30(4):598-609.
[28]	施法中. 计算机辅助几何设计与非均匀有理B样条[M]. 北京:高等教育出版社, 2001. SHI F Z. CAGD & NURBS[M]. Beijing:Higher Education Press, 2001(in Chinese).

Simultaneous optimization method for tool contour design and path planning of freeform surface flank milling

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References 28

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	. Comparative analysis of EMAT reception performance in laser ultrasonic surface detection of aluminum alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[2]	. Deformation analysis of five-axis milling considering material removal effect [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[3]	. Aluminum alloy clinch-bonding with hot melt adhesive film and joint failure analysis [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[4]	DUAN Yucong, WANG Xuede, ZHOU Xin, ZHANG Peiyu, GUO Xiyang, CHENG Xing, FAN Junwei. Machine learning of emission intensity signal of laser powder bed fusion molten pool [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 425855-425855.
[5]	WU Rui, SHI Wenze, LU Chao, LI Qiufeng, CHEN Guo. Quantitative analysis method for electromagnetic ultrasonic SH guided wave detection of aerospace stainless steel sheet [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 425888-425888.
[6]	RAN Qingbo, XIAO Hong, YANG Fuhong, DUAN Yugang. Trajectory planning algorithm for automatic wire laying on perforated surface [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 425602-425602.
[7]	. Research on mechanism for composite paint layer on aluminum alloy surface cleaned by laser [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[8]	. Review on On-line Monitoring of Chatter in Cutting Process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[9]	. The Research Progress of Metal Spinning – Additive Hybrid Manufacturing Technology for Complex Thin-Walled Cylinder with High Ribs [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[10]	. Influence of initial stress state on bilateral rolling process of thin-walled part [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[11]	LIU Zhendong, ZHENG Xitao, FAN Wenjing, ZHANG Dongjian. Effect of process-induced residual stress on strength of UAV composite wing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526117-526117.
[12]	. Research on trajectory optimization of robot flexible flanging [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[13]	. The deformation mechanism and microstructure evolution of aluminum stiffened cylinder during hot flow spinning based on numerical simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 0, (): 0-0.
[14]	KANG Shuo, KE Zhenzheng, WANG Xuan, ZHU Weidong. Detection method of defects in automatic fiber placement based on fusion of infrared and visible images [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425187-425187.
[15]	YUE Bo, XU Yingjie, XU Ningxin, ZHANG Weihong. Topology optimization of frame mold for autoclave process [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 425141-425141.