[1] FERNANDES C P, VOET M T, LITTLE Z, et al. Flow statistics and visualisation of multi-row film cooling boundary layers:GT2017-64391[R]. New York:ASME, 2017. [2] 朱惠人, 许都纯, 刘松龄, 等. 簸箕形排孔气膜冷却实验研究[J]. 航空学报, 1997, 18(5):25-28. ZHU H R, XU D C, LIU S L, et al. Film cooling experimental investigation of a row of dust-pan shaped holes[J]. Acta Aeronautica et Astronautica Sinica, 1997, 18(5):25-28(in Chinese). [3] 韩振兴, 末永洁, 刘石. 吹风比对气膜冷却效率影响的实验研究[J]. 航空学报, 2004, 25(6):551-555. HAN Z X, MO Y J, LIU S. Experimental research on film cooling effectivenesses at different blowing ratios[J]. Acta Aeronautica et Astronautica Sinica, 2004, 25(6):551-555(in Chinese). [4] 李广超, 张魏, 彭大维, 等. 带锥形扩张支孔射流气膜冷却效率数值模拟[J]. 航空学报, 2010, 31(7):1360-1365. LI G C, ZHANG W, PENG D W, et al. Numerical simulation of film cooling effectiveness with conical expanded branch holes[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(7):1360-1365(in Chinese). [5] 游良平, 陶毓伽, 蔡军, 等. 涡轮叶片前缘复合冷却实验[J]. 航空学报, 2009, 30(9):1618-1623. YOU L P, TAO Y J, CAI J, et al. Experiment of composite cooling on leading edge of turbine blade[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(9):1618-1623(in Chinese). [6] WIESE C J, RUTLEDGE J L, POLANKA M D. Experimental evaluation of thermal and mass transfer techniques to measure adiabatic effectiveness with various coolant to freestream property ratios:GT2017-65019[R]. New York:ASME, 2017. [7] MCCLINTIC J W, ANDERSON J B, BOGARD D G, et al. Effect of internal crossflow velocity on film cooling effectiveness-Part I:Axial shaped holes:GT2017-64616[R]. New York:ASME, 2017. [8] MCCLINTIC J W, ANDERSON J B, BOGARD D G, et al. Effect of internal crossflow velocity on film cooling effectiveness-Part Ⅱ:Compound angle shaped holes:GT2017-64624[R]. New York:ASME, 2017. [9] 姚玉, 张靖周, 何飞, 等. 涡轮叶片吸力面上收敛缝形孔气膜冷却效率的数值研究[J]. 航空学报, 2010, 31(6):1115-1120. YAO Y, ZHANG J Z, HE F, et al. Numerical investigation on film cooling effectiveness of converging slot hole at turbine blade suction surface[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(6):1115-1120(in Chinese). [10] 丁阳, 常海萍, 杜治能. 多排反向射流角气膜冷却特性研究[J]. 航空学报, 2013, 34(11):2472-2481. DING Y, CHANG H P, DU Z N. Investigation on characteristics of multiple rows of opposite lateral ejection angle film cooling[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(11):2472-2481(in Chinese). [11] 刘存良, 朱惠人, 白江涛, 等. 涡轮叶片上收缩-扩张形孔排的全表面气膜冷却特性[J]. 航空学报, 2010, 31(4):687-693. LIU C L, ZHU H R, BAI J T, et al. Experimental research on film cooling characteristics of converging-expanding hole rows on turbine blade surface[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(4):687-693(in Chinese). [12] SEO H J, LEE J S, LIGRANI P M. Effects of bulk flow pulsations on film cooling from different length injection holes at different blowing ratios:98-GT-192[R]. New York:ASME, 1998. [13] JUNG I S, LEE J S. Effects of bulk flow pulsations on film cooling from spanwise oriented holes:98-GT-211[R]:New York:ASME, 1998. [14] LEE J S, JUNG I S. Effect of bulk flow pulsations on film cooling with compound angle holes[J]. International Journal of Heat & Mass Transfer, 2002, 45(1):113-123. [15] NIKPARTO A, RICE T, SCHOBEIRI M T. Experimental and numerical investigation of heat transfer and film cooling effectiveness of a highly loaded turbine blade under steady and unsteady wake flow condition:GT2017-65012[R]. New York:ASME, 2017. [16] LU X G, ZHANG Y F, LI W, et al. Effects of periodic wakes on boundary layer development on an ultra-high-lift low pressure turbine airfoil[J]. Proceedings of the Institution of Mechanical Engineers Part A-Journal of Power & Energy, 2016, 231(1):25-38. [17] 蒋雪辉, 赵晓路. 非定常尾迹对叶栅气膜冷却效率的影响[J]. 推进技术, 2004, 25(4):311-315. JIANG X H, ZHAO X L. Effect of unsteady wake on linear cascade film cooling efficiency[J]. Journal of Propulsion Technology, 2004, 25(4):311-315(in Chinese). [18] 蒋雪辉, 赵晓路. 非定常尾迹对气膜冷却影响的数值研究[J]. 工程热物理学报, 2005, 26(2):322-324. JIANG X H, ZHAO X L. Numerical simulation of the unsteady wakes effects on film cooling[J]. Journal of Engineering Thermophysics, 2005, 26(2):322-324(in Chinese). [19] 蒋雪辉, 赵晓路. 非定常尾迹对叶片头部气膜冷却的影响[J]. 航空动力学报, 2005, 20(4):540-544. JIANG X H, ZHAO X L. The effect of unsteady wake on leading edge film cooling[J]. Journal of Aerospace Power, 2005, 20(4):540-544(in Chinese). [20] GUENETTE G R, EPSTEIN A H, GILES M B, et al. Fully scaled transonic turbine rotor heat transfer measurements[J]. Journal of Turbomachinery, 1989, 111(1):1-7. [21] BRIEN J E, CAPP S P. Two-component phase-averaged turbulence statistics downstream of a rotating spoked-wheel wake generator[J]. Journal of Turbomachinery, 1989, 111(4):475-482. |