基于磁记忆技术对含缺陷焊缝的疲劳试验

doi:10.7527/S1000-6893.2018.22454

Abstract

Abstract: The ray detection, fatigue test and orthogonal magnetic memory signal measurement are performed on 40Cr welding plates containing different invisible damages, exploring the characteristics of magnetic memory signals under the fatigue stress. The experimental results are accidental because the magnetic characteristics under the single measurement method cannot characterize the variations of the weld plate under fatigue cyclic loading. The study found that the integral gradient feature of the magnetic field vector and the combined gradient feature of the magnetic field vector can be used to evaluate the fatigue damage process of the weld plate. The study also establishes a fatigue damage model with the gradient feature of magnetic vector as the damage parameter, so that the fatigue life of the welded component with invisible damage can be quantitatively evaluated. The study also provides reference for further research on metal magnetic memory technology in quantitative evaluation of welding defects.

Key words: nondestructive testing, metal magnetic memory testing, integral gradient feature of magnetic field vector, synthesized gradient feature of magnetic field vector, fatigue life

CLC Number:

V250.3

REN Shangkun, ZU Ruili. Fatigue test of welds with defects based on magnetic memory technology[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(3): 422454-422454.

References

[1] 任吉林, 王东升, 宋凯, 等. 应力状态对磁记忆信号的影响[J]. 航空学报, 2007, 28(3):724-728. REN J L, WANG D S, SONG K, et al. Influence of stress state on magnetic memory signal[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(3):724-728(in Chinese).
[2] 任吉林, 白鹭, 范振中, 等. 航空铁磁材料磁记忆检测新方法[J]. 航空学报, 2009, 30(11):2224-2228. REN J L, BAI L, FAN Z Z, et al. New method of magnetic memory testing for aeronautical ferromagnetic materials[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(11):2224-2228(in Chinese).
[3] LENG J C, XING H Y, ZHOU G Q, et al. Dipole modelling of metal magnetic memory for V-notched plates[J]. Insight:Non-Destructive Testing and Condition Monitoring, 2013, 55(9):498-503.
[4] LIORZOU F, PHELPS B, ATHERTON D L. Macroscopic models of magnetization[J]. IEEE Transactions on Magnetics, 2000, 36(2):418-428.
[5] LI C C, DONG L H, WANG H D, et al. Metal magnetic memory technique used to predict the fatigue crack propagation behavior of 0.45%C steel[J]. Journal of Magnetism & Magnetic Materials, 2016, 405:150-157.
[6] DUBOV A. Principle features of metal magnetic memory method and inspection tools as compared to known magnetic NDT methods[C]//World Conference on Nondestructive Testing, 2006:1034-1037.
[7] DUBOV A, KOLOKOLNIKOV M S. Assessment of the material state of oil and gas pipelines based on the metal magnetic memory method[J]. Welding in the World, 2012, 56(3-4):11-19.
[8] ROSKOSZ M. Metal magnetic memory testing of welded joints of ferritic and austenitic steels[J]. NDT & E International, 2011, 44(3):305-310.
[9] 刘红光, 张卫民, 王朝霞, 等. 基于磁记忆法的焊接缺陷检测技术研究[J]. 北京理工大学学报, 2007, 27(9):811-814. LIU H G, ZHANG W M, WANG Z X, et al. Research on the detection technology of welding defects based on magnetic memory method[J]. Journal of Beijing Institute of Technology, 2007, 27(9):811-814(in Chinese).
[10] 邸新杰, 李午申, 白世武, 等. 焊接裂纹金属磁记忆信号的神经网络识别[J]. 焊接学报, 2008, 29(3):13-16. DI X J, LI W S, BAI S W, et al. Neural network identification of welding crack metal magnetic memory signals[J]. Journal of Welding, 2008, 29(3):13-16(in Chinese).
[11] 邸新杰, 李午申, 严春妍, 等. 基于金属磁记忆的宏观焊接裂纹识别方法[J]. 中国机械工程, 2007, 18(12):1475-1478. DI X J, LI W S, YAN C Y, et al. Identification of macroscopic weld cracks based on metal magnetic memory[J]. China Mechanical Engineering, 2007, 18(12):1475-1478(in Chinese).
[12] 邸新杰, 李午申, 白世武, 等. 金属磁记忆检测信号的二维谱熵特征[J]. 焊接学报, 2006, 27(11):69-72. DI X J, LI W S, BAI S W, et al. Two-dimensional spectral entropy characteristics of metal magnetic memory detection signals[J]. Journal of Welding, 2006, 27(11):69-72(in Chinese).
[13] DUBOV A, KOLOKOLNIKOV S. Application of the metal magnetic memory method for detection of defects at the initial stage of their development for prevention of failures of power engineering welded steel structures and steam turbine parts[J]. Welding in the World, 2014, 58(2):225-236.
[14] KOLOKOLNIKOV S, DUBOV A, STEKLOV O. Assessment of welded joints stress-strain state inhomogeneity before and after post weld heat treatment based on the metal magnetic memory method[J]. Welding in the World, 2016, 60(4):1-8.
[15] 徐坤山, 仇性启, 姜辉, 等. 20钢焊接缺陷磁记忆信号分析[J]. 焊接学报, 2016, 37(3):13-16. XU K S, QIU X Q, JIANG H, et al. Analysis of magnetic memory signals in welding defects of 20 steels[J]. Journal of Welding, 2016, 37(3):13-16(in Chinese).
[16] 张彦华. 焊接结构疲劳分析[M]. 北京:化学工业出版社, 2013. ZHANG Y H. Fatigue analysis of welded structures[M]. Beijing:Chemical Industry Press, 2013(in Chinese).
[17] 李新蕾, 任吉林, 任尚坤, 等. 铁磁构件残余寿命评估方法[J]. 航空学报, 2010, 31(10):2109-2114. LI X L, REN J L, REN S K, et al. Evaluation method of residual life of ferromagnetic components[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(10):2109-2114(in Chinese).
[18] 周培, 任吉林, 孙金立, 等. 李萨如图在磁记忆二维定量检测中的应用[J]. 航空学报, 2013, 34(8):1990-1997. ZHOU P, REN J L, SUN J L, et al. Application of Lissajous figure in two-dimensional magnetic memory detection[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(8):1990-1997(in Chinese).
[19] 刘昌奎, 陈星, 张兵, 等. 构件低周疲劳损伤的金属磁记忆检测试验研究[J]. 航空材料学报, 2010, 30(1):72-77. LIU C K, CHEN X, ZHANG B, et al. Experimental study on metal magnetic memory testing of low-cycle fatigue damage of components[J]. Journal of Aeronautical Materials, 2010, 30(1):72-77(in Chinese).
[20] 任吉林, 陈曦, 罗声彩, 等. 高周疲劳损伤的磁记忆二维检测研究[J]. 航空学报, 2012, 33(6):1147-1155. REN J L, CHEN X, LUO S C, et al. Research of high-cycle fatigue damage by two-dimensional magnetic memory testing[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(6):1147-1155(in Chinese).
[21] 刘昌奎, 陶春虎, 陈星, 等. 基于金属磁记忆技术的18CrNi4A钢缺口试件疲劳损伤模型[J]. 航空学报, 2009, 30(9):1641-1647. LIU C K, TAO C H, CHEN X, et al. Fatigue damage model of notched 18CrNi4A steel specimens by metal magnetic memory method[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(9):1641-1647(in Chinese).
[22] 刘昌奎, 陶春虎, 陈星, 等. 金属磁记忆检测技术定量评估构件疲劳损伤研究[J]. 材料工程, 2009, 2009(8):33-37. LIU C K, TAO C H, CHEN X, et al. Quantitative evaluation of fatigue damage of component based on metal magnetic memory testing technology[J]. Journal of Materials Engineering, 2009, 2009(8):33-37(in Chinese).

Fatigue test of welds with defects based on magnetic memory technology

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	SHANG Yong, FENG Yang, LIU Qiaomu, WANG Junwu, YANG Huijun, RU Yi, ZHANG Heng, ZHAO Wenyue, PEI Yanling, LI Shusuo, GONG Shengkai. Research and application of large scientific facility on high-temperature structural materials and coatings of aero-engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527481-527481.
[2]	LI Yuhai, WANG Chengbo, CHEN Liang, DONG Hongda, GUAN Yu, DI Hongliang, GU Yuxuan. Overview on development of advanced fighter life design and extension technology [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(8): 525791-525791.
[3]	YANG Zhengwei, ZHAO Zhibin, LI Yin, SONG Yuanjia, KOU Guangjie, LI Lei, CHENG Pengfei. Infrared radiation characteristics of CFRP laminate surface under compressive fatigue load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524239-524239.
[4]	ZHANG Fuze. Principle and method of calculating real corrosion tolerance value of aircraft struture [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524457-524457.
[5]	ZHANG Junrui, ZHENG Xitao, YUAN Lin, ZHONG Guiyong, LI Guochen. Fatigue life prediction method for hybrid multi-bolted joints based on damage weight [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524306-524306.
[6]	WANG Lianqing, HU Ya'nan, CHE Zhigang, WU Shengchuan. Fatigue performance of laser shock processed fusion welded 7075 Al alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524320-524320.
[7]	LIU Binchao, BAO Rui, SUI Fucheng. A mean-stress model including material cyclic constitutive in uniaxial fatigue [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 224735-224735.
[8]	TAN Xiaoming, ZHANG Danfeng, ZHAN Guipan, WANG De. Damage mechanism of shot peened ultra-high strength steel under combined action of marine environment and fatigue load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(8): 223631-223631.
[9]	SHA Yundong, AI Size, ZHAO Fengtong, JIANG Zhuoqun, ZHANG Jiaming. Vibro-acoustic response analysis and fatigue life prediction of thin-walled structures with high speed heat flux [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 223327-223327.
[10]	MU Tong, MENG Ge, XIE Liyang, ZHANG Jianbo, SHI Chaocheng. Accelerated random fatigue test design based on stress distribution model [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 223229-223229.
[11]	ZHAO Benyong, SONG Kai, NING Ning, HUANG Huabin, ZHANG Lipan. Optimization and experimentation of remote field eddy current testing probe for hidden defects of aircraft riveting parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(1): 423111-423111.
[12]	GOU Lei, MA Yu'e, DU Yong, LIU Lei, GUO Chao, LI Gang. Residual stress profile and fatigue life of 7050 aluminum plate with groove under laser shot peening [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(12): 423096-423096.
[13]	XU Yingqiang, CHEN Xianliang, CAO Dongbo. Compatibility test method in minimal samples situation with two samples [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(5): 221936-221936.
[14]	DONG Anqi, ZHAO Xinqing, ZHAO Yan. Tension-tension fatigue performance of unidirectional out-of-autoclave composite manufactured by automated fiber placement [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(2): 421422-421422.
[15]	YANG Qiang, WEN Congcong, SUN Zhili, ZHANG Mengjun. Reliability analysis of fatigue life of aviation electrical connector contact parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(10): 222123-222123.