航空发动机机匣摆线粗加工轨迹规划方法

doi:10.7527/S1000-6893.2017.21814

Abstract

Abstract: To overcome the problems in rough machining of casing parts such as multiple bosses, large machining allowance, low machinability of materials, fast tool wear and long process cycle, a tool-path planning method for the trochoidal milling of the aeroengine casing is proposed, with which the change of the tool load can be controlled effectively, the heating-cooling cycle is improved, the tool wear is retarded, and the machining efficiency can be increased in the rough machining process of casing. First of all, through an analysis of two trochoidal models, a mathematical model for the trochoidal milling is developed, and the advantages as well as the disadvantages of the trochoidal milling are discussed. Then, based on the characteristics of the casing parts, the model is discretized into a point model in the accuracy range. The model is unfolded by using the cone, and the mapping relationship between the unfolded model and the original one is established. According to the division and plane approximation of the machining area, the tool path of trochoidal rough machining for casing parts is generated. Finally, experiments on the trochoidal milling of tool wear, planar cavity and casing show that the trochoidal milling is effective in reducing the tool wear and prolonging the tool life. The validity and high efficiency of the proposed trajectory generation algorithm in the actual processing of the aeroengine casing are verified. The research achievements can effectively shorten the processing cycle, reduce the machining costs and improve the rough machining efficiency of casing parts.

Key words: trochoidal milling, aeroengine casing, region division, path planning, point model

CLC Number:

V261
TP391.7

WANG Jing, LUO Ming, WU Baohai, ZHANG Dinghua. A trochoidal path planning method for rough machining of aeroengine casing parts[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(6): 421814-421814.

References

[1] 王聪梅. 机匣制造技术[M]. 北京:科学出版社, 2002. WANG C M. Machining technology of casing[M]. Beijing:Science Press, 2002(in Chinese).
[2] 盛文娟, 徐斌. 航空发动机机匣电解加工工艺试验[J]. 电加工与模具, 2010(2):52-55. SHENG W J, XU B. Technological test of electrolytic machining of aero-engine casing[J]. Electromachining & Mould, 2010(2):52-55(in Chinese).
[3] LIU X, KANG X, ZHAO W, et al. Electrode feeding path searching for 5-axis EDM of integral shrouded blisks[C]//The Seventeeth CIRP Conference on Electro Physical and Chemical Machining (ISEM). 2013:107-111.
[4] 崔海军, 张明岐, 程小元. 民机机匣电解加工设备的研制[J]. 电加工与模具, 2016(z1):60-62. CUI H J, ZHANG M Q, CHENG X Y. Development of the ECM machine for civil aeroengine casing[J]. Electromachining & Mould, 2016(z1):60-62(in Chinese).
[5] 任军学, 田卫军, 姚倡锋, 等. 航空发动机机匣数控加工关键技术研究[J]. 航空制造技术, 2016(5):73-77. REN J X, TIAN W J, YAO C F, et al. Research on key technology of aeroengine casing CNC machining[J]. Aeronautical Manufacturing Technology, 2016(5):73-77(in Chinese).
[6] 任军学, 龚仔华, 田荣鑫, 等. 航空发动机机匣五轴插铣加工[J]. 航空制造技术, 2013(9):58-61. REN J X, GONG Z H, TIAN R X, et al. 5-axis plunge milling of aeroengine case[J]. Aeronautical Manufacturing Technology, 2013(9):58-61(in Chinese).
[7] HIRANO C, MORISHIGE K. Development of rough cutting method with plunge milling using 5-axis control machine tool[J]. Journal of the Japan Society for Precision Engineering, 2007, 73(11):1261-1266.
[8] 周续, 张定华, 吴宝海, 等. 材料切除对机匣铣削动力学与稳定性的影响[J]. 航空学报, 2016, 37(4):1352-1362. ZHOU X, ZHANG D H, WU B H, et al. Dynamics and stability analysis in end milling of aero-engine casing considering material removal effect[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(4):1352-1362(in Chinese).
[9] PATIL P, POLISHETTY A, GOLDBERG M, et al. Slot machining of TI6AL4V with trochoidal milling technique[J]. Journal of Machine Engineering, 2014, 14(4):42-54.
[10] ELBER G, COHEN E, DRAKE S. MATHSM:Medial axis transform toward high speed machining of pockets[J]. Computer-Aided Design, 2005, 37(2):241-250.
[11] XIONG Z H, ZHUANG C G, DING H. Curvilinear tool path generation for pocket machining[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2011, 225(4):483-495.
[12] IBARAKI S, YAMAJI I, MATSUBARA A. On the removal of critical cutting regions by trochoidal grooving[J]. Precision Engineering, 2010, 34(3):467-473.
[13] RAUCH M. Rough pocket milling with trochoidal and plunging strategies[J]. International Journal of Machining & Machinability of Materials, 2007, 2(2):161-175.
[14] RAUCH M, DUC E, HASCOET J Y. Improving trochoidal tool paths generation and implementation using process constraints modelling[J]. International Journal of Machine Tools & Manufacture, 2009, 49(5):375-383.
[15] FERREIRA J C, OCHOA D M. A method for generating trochoidal tool paths for 21/2 D pocket milling;process planning with multiple tools[J]. Proceedings of the Institution of Mechanical Engineers, Part B:Journal of Engineering Manufacture, 2013, 227(9):1287-1298.
[16] DIEHL A, PATTERSON R B. Method of milling an interior region:US8560113[P]. 2013.
[17] SONA G. Automatic method for milling complex channel-shaped cavities:US9423788[P]. 2016.
[18] OTKUR M, LAZOGLU I. Trochoidal milling[J]. International Journal of Machine Tools & Manufacture, 2007, 47(9):1324-1332.
[19] SZALÓKI I, CSUKA S, SIPOS S. New test results in cycloid-forming trochoidal milling[J]. Acta Polytechnica Hungarica, 2014, 11(2):215-228.
[20] KARDES N, ALTINTAS Y. Mechanics and dynamics of the circular milling process[J]. Journal of Manufacturing Science & Engineering, 2007, 129(1):21-31.
[21] KLOCKE F, BERGS T, BUSCH M, et al. Integrated approach for a knowledge-based process layout for simultaneous 5-axis milling of advanced materials[J]. Advances in Tribology, 2011, 2011:108-115.

A trochoidal path planning method for rough machining of aeroengine casing parts

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	XUE Zhentao, CHEN Jian, ZHANG Zichao, LIU Xuzan, MIAO Xiansheng, HU Gui. Multi-UAV coverage path planning based on optimization of convex division of complex plots [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(12): 325990-325990.
[2]	ZHOU Bin, GUO Yan, LI Ning, ZHONG Xijian. Path planning of UAV using guided enhancement Q-learning algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 325109-325109.
[3]	HU Xinting, WU Yu. Risk-based discrete multi-path planning method for UAVs in urban environments [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 324383-324383.
[4]	PANG Lei, CAO Zhiqiang, YU Junzhi. A pedestrian-aware collision-free following approach for mobile robots based on A^* and TEB [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(4): 524909-524909.
[5]	ZHAO Huan, JIANG Zongmin, DING Han. Tool path planning for profiling grinding of aero-engine blade edge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524318-524318.
[6]	WU Kun, TAN Shaochang. Path planning of UAVs based on improved whale optimization algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(S2): 724286-724286.
[7]	LI Xianqiang, MA Rong, ZHANG Shen, HOU Yanze, PEI Yifei. Improved design of ant colony algorithm and its application in path planning [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(S2): 724381-724381.
[8]	DAI Jian, XU Fei, CHEN Qifeng. Multi-UAV cooperative search on region division and path planning [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(S1): 723770-723770.
[9]	LI Anti, LI Chenglong, WU Dingjie, WEI Peng. Collision avoidance decision method for UAVs in random search combined with jump point guidance [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(8): 323726-323726.
[10]	LU Yanmei, ZONG Qun, ZHANG Xiuyun, LU Hanchen, ZHANG Ruilong. Formation reconstruction and virtual simulation verification of swarm UAVs [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(4): 323580-323580.
[11]	KAN Ping, JIANG Zhaoliang, LIU Yuhao, WANG Zhenwu. Cooperative path planning for multi-sprayer-UAVs [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(4): 323610-323610.
[12]	WANG Zhiwei, LIN Xiaojun, SHI Yaoyao, GAO Yuan, ZHANG Yun. A polishing path planning method for blisk with abrasive cloth wheel based on compression deviation constraint [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(2): 623330-623330.
[13]	WANG Jing, LUO Ming, ZHANG Dinghua, CHEN Bing. Simultaneous optimization method for tool contour design and path planning of freeform surface flank milling [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 423720-423720.
[14]	SONG Guilin, WANG Xianfeng, ZHAO Cong, GAO Tiancheng, XUE Ke. Fiber placement trajectory planning and tows increase or decrease algorithm for revolution body [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 423704-423704.
[15]	LIU Haitao, GU Xinyu, FANG Xiaoyu, LI Dongxia. Path panning for UAV relay communication systems with DS-CDMA over frequency selective fading channel [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(7): 322633-322633.