导航

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 2016, Vol. 37 ›› Issue (4): 1218-1227.doi: 10.7527/S1000-6893.2015.0214

• Solid Mechanics and Vehicle Conceptual Design • Previous Articles     Next Articles

Concurrent topology optimization based on multiphase materials under steady thermal conduction

JIA Jiao1, LONG Kai2, CHENG Wei1   

  1. 1. School of Aeronautic Science and Engineering, Beihang University, Beijing 100083, China;
    2. State Key Laboratory for Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China
  • Received:2015-04-09 Revised:2015-07-30 Online:2016-04-15 Published:2015-08-28
  • Supported by:

    National Natural Science Foundation of China (11202078);Beijing Natural Science Foundation (3143025);The Key Laboratory of Lightweight and Reliability Technology for Engineering Vehicle,Education Department of Hunan Province (Changsha University of Science&Technology)(2013KFJJ01);Fundamental Research Funds for the Central Universities (2014ZD16)

Abstract:

Based on multiphase materials, a concurrent optimization model of macrostructures and porous microstructures is proposed. In this model, the minimized heat compliance is taken as objective function. Structural volume fraction and microstructure mass are taken as constraints. Macro design variables and micro phase design variables are introduced into macrostructures and microstructures independently, and are integrated into one system with elemental phase density. The punishment relationship between elemental phase density and thermal conductive coefficient is built through uniform interpolation model, and the sensitivity of objective function is deduced. To eliminate the checkerboard pattern and mesh-dependence problem, the heat compliance is filtered using a partial differential equation. The effects of material characteristics, heat loads, volume fraction and microstructure mass constraints are discussed with 2D problems. The numerical results indicate that the proposed method is reliable and efficient to the concurrent topology optimization of macrostructures and porous microstructures based on multiphase materials.

Key words: topology optimization, concurrent optimization, multiphase materials, steady thermal conduction, volume constraint, mass constraint

CLC Number: