基于特征的蒙皮镜像铣加工残区刀轨优化方法

doi:10.7527/S1000-6893.2015.0240

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于特征的蒙皮镜像铣加工残区刀轨优化方法

刘少伟, 李迎光, 郝小忠, 刘长青, 向兵飞

南京航空航天大学机电学院, 南京 210016

收稿日期:2015-07-28 修回日期:2015-08-28 出版日期:2016-07-15 发布日期:2015-09-02
通讯作者: 李迎光男,博士,教授,博士生导师。主要研究方向:飞机数字化快速生产准备技术及软件开发、数字化设计制造、制造业信息化。Tel:025-84895835,E-mail:liyingguang@nuaa.edu.cn E-mail:liyingguang@nuaa.edu.cn
作者简介:刘少伟男,硕士研究生。主要研究方向:蒙皮镜像铣数控编程技术。Tel:025-84895906,E-mail:379537350@qq.com;
基金资助:
国家科技重大专项（2013ZX04001-021)

Feature-based uncut region tool path optimization method for skin parts machined by mirror milling system

LIU Shaowei, LI Yingguang, HAO Xiaozhong, LIU Changqing, XIANG Bingfei

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2015-07-28 Revised:2015-08-28 Online:2016-07-15 Published:2015-09-02
Supported by:
National Science and Technology Major Project (2013ZX04001-021)

摘要/Abstract

摘要：

镜像铣加工装备及其加工工艺是蒙皮零件加工的有效手段，其特殊工艺对加工刀轨提出了等步距、无交叉、无抬刀且无残留等特殊要求。针对蒙皮零件加工特征的复杂形状，在满足等步距、无抬刀、无交叉的条件下对加工残留区域进行刀轨优化是一个难题。为解决以上难题，本文提出了一种基于特征的蒙皮镜像铣加工残区刀轨优化方法。该方法基于特征将蒙皮零件的工艺信息与几何信息相关联，自动提取加工特征的加工面及其对应的刀轨，将刀轨分割成若干段子刀轨，并构建子加工区域，再利用布尔并运算得到最终可加工区域。然后对加工面区域与最终可加工区域求布尔差识别出加工残留区域，并根据加工残区位置自适应生成满足蒙皮镜像铣特殊要求的优化刀轨。以典型复杂蒙皮零件验证本文提出的方法，结果表明，基于特征的蒙皮镜像铣加工残区刀轨优化方法可自动识别加工残区，并生成满足蒙皮镜像铣特殊要求的加工残区优化刀轨，为提高蒙皮零件数控编程效率提供技术支撑。

关键词: 蒙皮, 镜像铣, 加工残区, 识别, 刀轨优化

Abstract:

The equipment and the machining process of mirror milling system are effective for aircraft skin parts, whose particular process puts forward special demands on machining tool path, including equal tool path interval, non-cross, no tool retractions and no uncut region. Due to the complex shapes of machining features in aircraft skin parts, it is a difficult task to optimize tool path for uncut regions under the requirements of equal tool path interval, non-cross, no tool retractions. To solve this problem, a feature-based tool path optimization method for uncut regions is proposed. The process information is associated with geometric information based on features, and then the machining surface and its corresponding tool path are extracted automatically. Tool paths are divided into several subdivision tool paths to construct subdivision machining areas, and the final machining area is obtained by union Boolean operation. Then the uncut regions are detected by executing the subtraction Boolean operation between the machining surface area and the final machining area, and the optimized tool path satisfying the special tool path requirements is eventually generated according to the location of the uncut regions adaptively. A typical complex aircraft skin part is used to verify the proposed method and the result proves that uncut regions can be recognized automatically and the optimized tool paths which satisfy the special tool path requirements are generated. The proposed method can provide technical support for improving the NC programming efficiency for aircraft skin parts.

Key words: skin, mirror milling, uncut regions, recognition, tool path optimization

中图分类号:

V262.3⁺3

刘少伟, 李迎光, 郝小忠, 刘长青, 向兵飞. 基于特征的蒙皮镜像铣加工残区刀轨优化方法[J]. 航空学报, 2016, 37(7): 2295-2302.

LIU Shaowei, LI Yingguang, HAO Xiaozhong, LIU Changqing, XIANG Bingfei. Feature-based uncut region tool path optimization method for skin parts machined by mirror milling system[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(7): 2295-2302.

参考文献

[1] 张彤. 飞机蒙皮厚度精确加工的最新技术——以数铣替代化铣的绿色加工工艺[J]. 教练机, 2011(4):25-29. ZHANG T. Up-to-date technology for precision machining of aircraft skin thickness-Greenhouse machining technology for the CNC milling instead of chemical milling[J]. Trainer, 2011(4):25-29(in Chinese).
[2] 张志国, 徐学民. MMS:新型绿色蒙皮加工系统[J]. 航空制造技术, 2010(19):84-86. ZHANG Z G, XU X M. MMS:The latest green skin machining system[J]. Aeronautical Manufacturing Technology, 2010(19):84-86(in Chinese).
[3] 鲁达. 新一代飞机蒙皮绿色加工技术[J]. 航空制造技术, 2010(16):102-103. LU D. New generation green machining technology for aircraft skin[J]. Aeronautical Manufacturing Technology, 2010(16):102-103(in Chinese).
[4] LIN Z, FU J, SHEN H, et al. Global uncut regions removal for efficient contour-parallel milling[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8):1241-1252.
[5] CHOY H S, CHAN K W. A corner-looping based tool path for pocket milling[J]. Computer-Aided Design, 2003, 35(2):155-166.
[6] CHIANG C S, HOFFMANN C M, LYNC R E. How to compute offsets without self-intersection[J]. SPIE Proceedings, 1992, 1610:1-12.
[7] CHOI B K, KIM B H. Die-cavity pocketing via cutting simulation[J]. Computer-Aided Design, 1997, 29(12):837-846.
[8] 刘金义, 刘爽. Voronoi图应用综述[J]. 图学学报, 2004, 25(2):125-132. LIU J Y, LIU S. A survey on applications of Voronoi diagrams[J]. Journal of Engineering Graphics, 2004, 25(2):125-132(in Chinese).
[9] 牟园伟, 陆山. 基于材料微观特性的涡轮盘疲劳裂纹萌生寿命数值仿真[J]. 航空学报, 2013, 34(2):282-290. MU Y W, LU S. Numerical simulation of fatigue-crack-initiation life for turbine disk based on material microcosmic characteristics[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2):282-290(in Chinese).
[10] 马玉伟. 平面型腔数控加工刀具直径确定与刀轨生成技术研究[D]. 南京:南京航空航天大学, 2008:39-51. MA Y W. Research on determination of tool diameter for planar-pocket NC machining and tool-path generation technology[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2008:39-51(in Chinese).
[11] 马玉伟, 安鲁陵. 均匀偏置型腔加工残留区域分析[J]. 机械制造与自动化, 2008, 37(2):37-38. MA Y W, AN L L. Analysis of uncut areas in pocket maching[J]. Machine Building & Automation, 2008, 37(2):37-38(in Chinese).
[12] MANSOR M S A, HINDUJA S, OWODUNNI O. Voronoi diagram-based tool path compensations for removing uncut material in 21/2D pocket machining[J]. Computer-Aided Design, 2006, 38(3):194-209.
[13] CHOI B K, PARK S C. A pair-wise offset algorithm for 2D point-sequence curve[J]. Computer-Aided Design, 1999, 31(99):735-745.
[14] PARK S C, CHOI B K. Uncut free pocketing tool-paths generation using pair-wise offset algorithm[J]. Computer-Aided Design, 2001, 33(10):739-746.
[15] YAN S, WANG S, TONG S. Uneven offset method of NC tool path generation for free-form pocket machining[J]. Computers in Industry, 2000, 43(1):97-103.
[16] 王晶, 张定华, 罗明, 等. 复杂曲面零件五轴加工刀轴整体优化方法[J]. 航空学报, 2013, 34(6):1452-1462. WANG J, ZHANG D H, LUO M, et al. A global tool orientation optimization method for five-axis CNC machining of sculptured surfaces[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6):1452-1462(in Chinese).
[17] CHOI B K, KIM D H, JERARD R B. C-space approach to tool-path generation for die and mould machining[J]. Computer-Aided Design, 1997, 29(97):657-669.
[18] LIU X, LI Y, TANG L. A dynamic feature-based operation planning method for 2.5-axis numerical control machining of complex structural parts[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture, 2015, 229(7):1206-1220.
[19] LIU X, LI Y, LI Q. A machining feature information model for dynamic manufacturing planning[J]. Procedia CIRP, 2014, 25:100-105.
[20] WANG W, LI Y, TANG L. Drive geometry construction method of machining features for aircraft structural part numerical control machining[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture, 2014, 228(10):1214-1225.
[21] 闫海兵. 飞机结构件复杂加工特征识别技术的研究与实现[D]. 南京:南京航空航天大学, 2010:23-28. YAN H B. Research and implementation of complicated machining features recognition technology for the aircraft structural parts[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2010:23-28(in Chinese).
[22] 李迎光, 郝小忠, 刘少伟, 等. 飞机蒙皮零件特征识别方法:ZL104462656A[P]. 2015-03-25. LI Y G, HAO X Z, LIU S W, et al. The recognition method of feature for aircraft skin parts:ZL104462656A[P]. 2015-03-25(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于特征的蒙皮镜像铣加工残区刀轨优化方法

Feature-based uncut region tool path optimization method for skin parts machined by mirror milling system

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	赵其昌, 吴一全, 苑玉彬. 光学遥感图像舰船目标检测与识别方法研究进展[J]. 航空学报, 2024, 45(8): 29025-029025.
[2]	黄湛钧, 董鑫, 卢沐宇, 张瑞涛, 闫钊阳, 张安. 基于DRSN与电压幅值分析的航空HVDC系统逆变器故障诊断[J]. 航空学报, 2024, 45(3): 328685-328685.
[3]	王子玲, 熊振宇, 杨璐铖, 杨蕊宁, 黄林周. AIS和光学遥感图像引导的星载SAR舰船目标识别网络[J]. 航空学报, 2024, 45(2): 328672-328672.
[4]	魏震, 刘秀芳, 钟富豪, 陈佳军, 苗庆硕, 侯予. 微小冰晶粒子融化特性可视化实验[J]. 航空学报, 2023, 44(S2): 729301-729301.
[5]	刘进一, 熊建军, 桂康, 葛俊锋, 叶林. 基于多光谱和复阻抗的复合结冰探测技术[J]. 航空学报, 2023, 44(S2): 729309-729309.
[6]	刘鹏宇, 朱雪耀. 基于深度学习的融合空域空管指令语义解析技术[J]. 航空学报, 2023, 44(S1): 727592-727592.
[7]	张会霞, 梁彦, 马超雄, 汪冕, 乔殿峰. 数据和知识驱动的空战目标集群类型综合识别[J]. 航空学报, 2023, 44(8): 327266-327266.
[8]	郭江龙, 顾蕴松, 罗帅, 李琳恺. 基于表面压力信息的空间流向涡识别方法[J]. 航空学报, 2023, 44(6): 127228-127228.
[9]	丁鹏, 宋亚飞. 代价敏感的空中目标意图识别方法[J]. 航空学报, 2023, 44(24): 328551-328551.
[10]	张毅, 张焱, 张宇, 张勇, 刘荻. 基于多级特征增强融合的红外飞机目标检测方法[J]. 航空学报, 2023, 44(22): 629220-629220.
[11]	姜松成, 杨慧, 王岩, 肖洪, 刘永斌, 李传扬. 变形翼可调泊松比柔性蒙皮力学特性分析[J]. 航空学报, 2023, 44(13): 227748-227748.
[12]	李益文, 邓朝晖, 刘涛, 卓荣锦, 李重阳, 吕黎曙. 切削加工过程中颤振在线监测研究综述[J]. 航空学报, 2023, 44(11): 27562-027562.
[13]	苏翎菲, 化永朝, 董希旺, 任章. 人与无人机集群多模态智能交互方法[J]. 航空学报, 2022, 43(S1): 727001-727001.
[14]	王宇斐, 刘骁佳, 刘欢, 曹立俊, 罗志强. 孪生神经网络在航天产品电性能测试方面的应用[J]. 航空学报, 2022, 43(S1): 727048-727048.
[15]	段玉聪, 王学德, 周鑫, 张佩宇, 郭西洋, 成星, 樊军伟. 粉末床激光成形熔池辐射强度信号的机器学习[J]. 航空学报, 2022, 43(9): 425855-425855.