1 |
HUANG H B, LONG Y, JI B. Experimental investigation of vortex generator influences on propeller cavitation and hull pressure fluctuations[J]. Journal of Hydrodynamics, 2020, 32(1): 82-92.
|
2 |
ZHANG M J, HUANG B, WU Q, et al. The interaction between the transient cavitating flow and hydrodynamic performance around a pitching hydrofoil[J]. Renewable Energy, 2020, 161: 1276-1291.
|
3 |
LU G C, ZUO Z G, SUN Y K, et al. Experimental evidence of cavitation influences on the positive slope on the pump performance curve of a low specific speed model pump-turbine[J]. Renewable Energy, 2017, 113: 1539-1550.
|
4 |
ZHU D, XIAO R F, LIU W C. Influence of leading-edge cavitation on impeller blade axial force in the pump mode of reversible pump-turbine[J]. Renewable Energy, 2021, 163: 939-949.
|
5 |
YOON Y, KIM J, SONG S J. Identification of inducer cavitation instabilities using high-speed visualization[J]. Experimental Thermal and Fluid Science, 2022, 132: 110548.
|
6 |
熊英华, 刘影, 赵兴安, 等. 基于代理模型的航空燃油泵空化性能分析[J]. 航空学报, 2016, 37(10): 2952-2960.
|
|
XIONG Y H, LIU Y, ZHAO X A, et al. Analysis of cavitation performance of an aviation fuel pump based on surrogate model[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(10): 2952-2960 (in Chinese).
|
7 |
GUO X M, ZHU Z C, CUI B L, et al. Effects of the number of inducer blades on the anti-cavitation characteristics and external performance of a centrifugal pump[J]. Journal of Mechanical Science and Technology, 2016, 30(7): 3173-3181.
|
8 |
YAN L L, GAO B, NI D, et al. Numerical analysis on the cavitation characteristics of a pump with an inducer in non-uniform inflow[J]. Ocean Engineering, 2022, 256: 111407.
|
9 |
FU Y X, XIE J F, SHEN Y, et al. Experimental and numerical study on cavitation performances of a turbopump with and without an inducer[J]. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2022, 236(6): 1098-1111.
|
10 |
HONG S S, KIM D J, KIM J S, et al. Study on inducer and impeller of a centrifugal pump for a rocket engine turbopump[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2013, 227(2): 311-319.
|
11 |
WANG W, XIANG X, TAN T, et al. Experimental investigation of thermal effect on cavitation characteristics in a liquid rocket engine turbopump inducer[J]. Chinese Journal of Aeronautics, 2021, 34(8):48-57.
|
12 |
郭晓梅, 李昳, 崔宝玲, 等. 前置不同诱导轮高速离心泵旋转空化特性研究[J]. 航空学报, 2013, 34(7): 1572-1581.
|
|
GUO X M, LI Y, CUI B L, et al. Research on the rotation cavitation performance of high-speed rotation centrifugal pump with different pre-positioned inducers[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(7): 1572-1581 (in Chinese).
|
13 |
FAN Y D, CHEN T R, LIANG W D, et al. Numerical and theoretical investigations of the cavitation performance and instability for the cryogenic inducer[J]. Renewable Energy, 2022, 184: 291-305.
|
14 |
程效锐, 杨登峰, 刘明建. 环形槽位置对高速诱导轮空化性能的影响[J]. 排灌机械工程学报, 2021, 39(6): 548-554.
|
|
CHENG X R, YANG D F, LIU M J. Influence of annular groove position on cavitation performance of high-speed inducer[J]. Journal of Drainage and Irrigation Machinery Engineering, 2021, 39(6): 548-554 (in Chinese).
|
15 |
JIANG J, LI Y H, PEI C Y, et al. Cavitation performance of high-speed centrifugal pump with annular jet and inducer at different temperatures and void fractions[J]. Journal of Hydrodynamics, 2019, 31(1):93-101.
|
16 |
GU Y Q, DAI D S, MOU J G, et al. Influences of jet flow on cavitation performance[J]. World Pumps, 2015, 2015(11): 32-35.
|
17 |
王文廷, 许开富, 李永鹏, 等. 缝隙诱导轮多工况汽蚀性能研究[J]. 火箭推进, 2019, 45(1): 8-13.
|
|
WANG W T, XU K F, LI Y P, et al. Study on cavitation performance of gap inducer under multi-operating conditions[J]. Journal of Rocket Propulsion, 2019, 45(1): 8-13 (in Chinese).
|
18 |
康亚卓, 赵兴安, 吴钦, 等. 液体火箭发动机诱导轮非定常空化流动特性数值计算[J]. 排灌机械工程学报, 2020, 38(5): 462-468.
|
|
KANG Y Z, ZHAO X A, WU Q, et al. Numerical prediction of unsteady cavitating flow characteristics in turbo-pump inducer for liquid rocket engine[J]. Journal of Drainage and Irrigation Machinery Engineering, 2020, 38(5): 462-468 (in Chinese).
|
19 |
杨宝锋, 李斌, 陈晖, 等. 液体火箭发动机推进剂泵诱导轮与离心轮的匹配[J]. 航空学报, 2019, 40(5): 122609.
|
|
YANG B F, LI B, CHEN H, et al. Matching effect between inducer and impeller in a liquid rocket engine propellant pump[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(5): 122609 (in Chinese).
|
20 |
王福军. 计算流体动力学分析: CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004.
|
|
WANG F J. Computational fluid dynamics analysis: Principle and application of CFD software[M]. Beijing: Tsinghua University Press, 2004 (in Chinese).
|
21 |
ZWART P J, GERBER A G, BELAMRI T. A two-phase flow model for predicting cavitation dynamics[C]. Yokohama: ICMF 2004 International Conference on Multiphase Flow, 2004.
|
22 |
刘厚林, 刘东喜, 王勇, 等. 三种空化模型在离心泵空化流计算中的应用评价[J]. 农业工程学报, 2012, 28(16): 54-59.
|
|
LIU H L, LIU D X, WANG Y, et al. Applicative evaluation of three cavitating models on cavitating flow calculation in centrifugal pump[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(16): 54-59 (in Chinese).
|
23 |
LIU H L, WANG Y, LIU D X, et al. Assessment of a turbulence model for numerical predictions of sheet-cavitating flows in centrifugal pumps?[J]. Journal of Mechanical Science and Technology, 2013, 27(9): 2743-2750.
|