可变弯度机翼后缘形态重构光纤监测技术

doi:10.7527/S1000-6893.2020.23808

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

可变弯度机翼后缘形态重构光纤监测技术

于惠勇¹, 李华峰¹, 曾捷¹, 徐志伟¹, 黄继伟¹, 赵启迪²

1. 南京航空航天大学机械结构力学及控制国家重点实验室, 南京 210016;
2. 北京长城计量测试技术研究所计量与校准技术重点实验室, 北京 100095

收稿日期:2020-01-07 修回日期:2020-03-10 发布日期:2020-03-06
通讯作者: 李华峰 E-mail:lihuaf@nuaa.edu.cn
基金资助:
航空科学基金（20170252004，20185644006）；上海航天科技创新基金（SAST2018-015）；江苏省重点研发计划-产业前瞻与共性关键技术-竞争项目（BE2018047）

Monitoring technique for shape reconstruction of variable camber trailing edge based on optical fiber sensors

YU Huiyong¹, LI Huafeng¹, ZENG Jie¹, XU Zhiwei¹, HUANG Jiwei¹, ZHAO Qidi²

1. State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
2. Science and Technology on Metrology and Calibration Laboratory, Changcheng Institute of Metrology and Measurement, Beijing 100095, China

Received:2020-01-07 Revised:2020-03-10 Published:2020-03-06
Supported by:
Aeronautical Science Foundation of China (20170252004,20185644006); Shanghai Aerospace Science and Technology Innovation Fund (SAST2018-015); Jiangsu Provincial Key Research and Development Plan-Industry Foresight and Common Key Technology-Competitive Project (BE2018047)

摘要/Abstract

摘要： 可变弯度机翼是一种变翼型变体飞行器，在飞行过程中可根据不同的飞行环境自适应调整机翼弯度来提高飞行效率，从而适应复杂多样的任务环境。针对可变弯度机翼后缘形态与偏转角度实时监测需求，研究了一种基于光纤布拉格光栅传感器的机翼后缘形态重构方法。采用数值仿真方法分析可变弯度机翼后缘的形态变化特征，得到可变弯度机翼后缘偏转位移与偏转角度之间关系。给出光纤布拉格光栅传感器布局形式，构建了基于应变和曲率信息递推位移重构原理的机翼后缘形态和偏转角度监测系统。基于光纤布拉格光栅传感器的机翼后缘形态重构相对误差约为6.39%，偏转角度辨识相对误差约为7.47%。研究结果表明，所提方法能够为可变弯度机翼后缘形态感知、姿态自适应调整以及气动外形优化提供技术支撑。

关键词: 可变弯度机翼后缘, 光纤布拉格光栅传感器, 曲率递推方法, 形态重构, 偏转角度

Abstract: The variable camber wing as a variable-wing aircraft can be adaptively adjusted according to different flight environments to improve its flight efficiency, thereby adapting to complex and diverse mission environments. This paper studies a trailing-edge morphological reconstruction method based on distributed fiber Bragg grating sensors to meet the demand for real-time monitoring of the morphology and deflection of the variable camber trailing edge. In addition, numerical simulation is employed to analyze the morphological changes of the variable camber trailing edge, whence obtaining the relationship between the deflection displacement and the deflection of the variable camber trailing edge. Meanwhile, the layout form of the fiber Bragg grating sensor is presented, as well as the construction of the trailing-edge morphology and deflection monitoring system based on the reconstruction principle of recursive displacement of strain and curvature information. The relative error of trailing-edge morphological reconstruction based on the fiber Bragg grating sensor is about 6.39%, and that of deflection identification is about 7.47%. The research results show that the method proposed in this paper can provide technical support for morphology sensing, attitude adaptive adjustment and aerodynamic shape optimization of the variable camber trailing edge.

Key words: variable camber trailing edge, fiber Bragg grating sensors, curvature recursion method, morphological reconstruction, deflection

中图分类号:

V214

于惠勇, 李华峰, 曾捷, 徐志伟, 黄继伟, 赵启迪. 可变弯度机翼后缘形态重构光纤监测技术[J]. 航空学报, 2020, 41(10): 223808-223808.

YU Huiyong, LI Huafeng, ZENG Jie, XU Zhiwei, HUANG Jiwei, ZHAO Qidi. Monitoring technique for shape reconstruction of variable camber trailing edge based on optical fiber sensors[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 223808-223808.

参考文献

[1] ZHAO A, ZOU H, JIN H, et al. Structural design and verification of an innovative whole adaptive variable camber wing[J].Aerospace Science and Technology, 2019, 89:11-18.
[2] KAN Z, DAOCHUN L, XIANG J, et al. Delaying stall of morphing wing by periodic trailing-edge deflection[J].Chinese Journal of Aeronautics, 2020, 33(2):493-500.
[3] CHANDRA V,TIWARI U,DAS B.Elimination of light intensity noise using dual-channel scheme for fiber MZI-based FBG sensor interrogation[J].IEEE Sensors Journal,2016,16(8):2431-2436.
[4] AJAJ R M, BEAVERSTOCK C S, FRISWELL M I. Morphing aircraft:The need for a new design philosophy[J].Aerospace Science and Technology, 2016, 49(2):154-166.
[5] COMMUNIER D, BOTEZ R M, WONG T. Experimental validation of a new morphing trailing edge system using Price-Padoussis wind tunnel tests[J].Chinese Journal of Aeronautics, 2019, 32(6):1353-1366.
[6] 张音旋, 陈亮, 吴江鹏, 等.变弯度机翼后缘的研究进展及其关键技术[J].飞机设计,2017,37(6):34-39. ZHANG Y X, CHEN L, WU J P, et al. Research progress and key technologies of variable camber wing trailing edge[J].Aircraft Design, 2017, 37(6):34-39(in Chinese).
[7] CHAO Z, ZHANG Y, WU J H. Effect of flexibility on unsteady aerodynamics forces of a purely plunging airfoil[J].Chinese Journal of Aeronautics, 2020, 33(1):88-101.
[8] HE Y, ZHU L, SUN G, et al. Fiber Brag grating monitoring of a morphing wing based on a polyvinyl chloride reinforced silicone substrate[J].Optical Fiber Technology, 2019, 50:145-153.
[9] 沈广琛,白俊强,刘南,等.新型机翼后缘变弯运动机构仿真及其气动影响研究[J].西北工业大学学报,2016,34(4):578-586. SHEN G C, BAI J Q, LIU N, et al. Simulation of a new-type wing trailing edge bending motion mechanism and its aerodynamic effects[J].Journal of Northwestern Polytechnical University, 2016, 34(4):578-586(in Chinese).
[10] 秦博谦.柔性后缘可变形机翼的气动特性分析[J].中国高新科技,2019(13):63-65. QIN B Q. Aerodynamic characteristics analysis of flexible trailing edge deformable wing[J].China Hi-Tech, 2019(13):63-65(in Chinese).
[11] LU L L, SONG H W, WANG Y W, et al. Deformation behavior of non-rigid airships in wind tunnel tests[J].Chinese Journal of Aeronautics, 2019, 32(3):611-618.
[12] CHILELLI S K, SCHOMER J J,DAPINO M J. Detection of crack initiation and growth using fiber bragg grating sensors embedded into metal structures through ultrasonic additive manufacturing[J].Sensors,2019, 19(22):4917.
[13] LIU J, ZHANG J, XIN L I, et al. Study on multiplexing ability of identical fiber Bragg gratings in a single fiber[J].Chinese Journal of Aeronautics, 2011, 24(5):607-612.
[14] YU J S, LIANG D K. Impact localization system of composite structure based on recurrence quantification analysis by using FBG sensors[J].Optical Fiber Technology, 2019, 49:7-15.
[15] KIM S W, KANG W R, JEONG M S, et al. Deflection estimation of a wind turbine blade using FBG sensors embedded in the blade bonding line[J].Smart Materials & Structures, 2013, 22(12):5004.
[16] 朱晓锦,季玲晓,张合生,等.基于空间正交曲率信息的三维曲线重构方法分析[J].应用基础与工程科学学报,2011,19(2):305-313. ZHU X J, JI L X, ZHANG H S, et al. Analysis of 3D curve reconstruction method based on spatial orthogonal curvature information[J].Journal of Basic Science and Engineering, 2011,19(2):305-313(in Chinese).
[17] 沈林勇, 肖海, 钱晋武,等. 智能内窥镜的形状重建和可视化方法研究[J].仪器仪表学报, 2014(12):2725-2730. SHEN L Y, XIAO H, QIAN J W, et al. Research on shape reconstruction and visualization method of intelligent endoscope[J].Chinese Journal of Scientific Instrument, 2014(12):2725-2730(in Chinese).
[18] 张俊康, 孙广开, 李红, 等. 变形机翼薄膜蒙皮形状监测光纤传感方法研究[J].仪器仪表学报,2018,39(2):66-72. ZHANG J K, SUN G K, LI H, et al. Research on optical fiber sensing method for detecting shape of wing film skin shape[J].Chinese Journal of Scientific Instrument, 2018, 39(2):66-72(in Chinese).
[19] 易金聪, 朱晓锦, 张合生,等. 模拟高性能飞行器翼面结构形态的非视觉检测[J].振动、测试与诊断, 2014, 34(1):20-26. YI J C, ZHU X J, ZHANG H S, et al. Theory and experimental verification on valueless piezoelectric pump with variable cross section y-shape tubes[J].Journal of Vibration Measurement & Diagnosis, 2014, 34(1):20-26(in Chinese).
[20] 许滨华, 何宁, 何斌,等. 基于分布式光纤传感器的管道受弯变形监测试验研究[J].仪器仪表学报, 2019,40(8):3. XU B H, HE N, HE B, et al. Experimental research on pipeline bending deformation monitoring based on distributed optical fiber sensors[J].Journal of Instrumentation, 2019,40(8):3(in Chinese).
[21] 陈卓研, 郑东健, 周明明. 结构变形的分布式光纤监测研究[J].武汉大学学报(工学版), 2019,52(8):2. CHEN Z Y, ZHENG D J, ZHOU M M. Research on distributed optical fiber monitoring for structural deformation[J].Journal of Wuhan University, 2019,52(8):2(in Chinese).
[22] 朱晓锦, 张合生, 谢春宁,等. 一种基于曲率信息的太空帆板空间曲面拟合算法分析[J].系统仿真学报, 2007, 19(11):2496-2499. ZHU X J, ZHANG H S, XIE C N,et al. Analysis of curve surface fitting algorithm based on curvatures for space sailboard structure[J].Journal of System Simulation, 2007, 19(11):2496-2499(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

可变弯度机翼后缘形态重构光纤监测技术

Monitoring technique for shape reconstruction of variable camber trailing edge based on optical fiber sensors

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics

本文评价