基于三维格子Boltzmann铝点蚀动态数值模拟

doi:10.7527/S1000-6893.2019.23582

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

基于三维格子Boltzmann铝点蚀动态数值模拟

杨广峰, 路梦柯, 薛安源, 李虎林, 崔静

中国民航大学机场学院, 天津 300300

收稿日期:2019-10-15 修回日期:2020-03-23 发布日期:2020-03-20
通讯作者: 崔静 E-mail:j_cui@cauc.edu.cn
基金资助:
国家自然科学基金（U1633111，U1933107）；中国民航大学蓝天青年学者培养经费；中国民航大学科研启动经费（09QD05X）

Dynamic numerical simulation of aluminum pitting based on 3D-lattice Boltzmann method

YANG Guangfeng, LU Mengke, XUE Anyuan, LI Hulin, CUI Jing

Airport College, China Civil Aviation University, Tianjin 300300, China

Received:2019-10-15 Revised:2020-03-23 Published:2020-03-20
Supported by:
National Natural Science Foundation of China (U1633111,U1933107); Blue Sky Young Scholars Training Fund of China Civil Aviation University; China Civil Aviation University Research Startup Fund (09QD05X)

摘要/Abstract

摘要： 铝作为目前最经济且应用最为广泛的材料之一，具有重量轻、耐腐蚀、导热性好、导电性好等优点。然而，金属铝在氯离子环境中容易发生点蚀。根据中性溶液中铝表面点蚀反应机理，结合液体流动和相变特性，建立了三维格子Boltzmann铝点蚀模型，研究了中性溶液中铝表面的点蚀现象，弥补了传统实验方法的不足。采用建立的腐蚀模型对整个铝点蚀过程进行了模拟，得到了不同组分的浓度分布以及不同参数与腐蚀程度的关系。结果表明：铝的腐蚀程度随接触时间的增加而增加。随着初始氯离子浓度的增加和腐蚀反应速率的增大，铝被腐蚀得更严重。三维格子Boltzmann铝点蚀模型为金属腐蚀数值研究提供了新的思路。

关键词: 格子Boltzmann方法, 金属铝点蚀, 电化学反应, 腐蚀反应速率, 动态数值模拟, 腐蚀

Abstract: As one of the most economical and widely applied materials, aluminum has the advantages of light weight, corrosion resistance, and good thermal and electrical conductivity. However, aluminum is prone to pitting in chloride ion environments. Taking into account the aluminum surface pitting mechanism in neutral solution and liquid flow and phase transition characteristics, this study established a three-dimensional lattice Boltzmann model to examine the pitting phenomenon on aluminum surface in neutral solution, overcoming the deficiency of traditional experimental methods. The whole aluminum pitting process was simulated by the established corrosion model, and the concentration distribution of different components and the relationship between different parameters and corrosion degree were obtained. The results show that the degree of aluminum corrosion increases with the increase of contact time. Furthermore, the higher the initial chloride ion concentration, and the higher the corrosion reaction rate is, the more severe aluminum corrosion becomes. Therefore, the three-dimensional lattice Boltzmann aluminum pitting model provides a new approach to the future numerical study of metal corrosion.

Key words: lattice Boltzmann method, aluminum pitting, electrochemical reaction, corrosion reaction rate, dynamic numerical simulation, corrosion

中图分类号:

V252.2

杨广峰, 路梦柯, 薛安源, 李虎林, 崔静. 基于三维格子Boltzmann铝点蚀动态数值模拟[J]. 航空学报, 2020, 41(10): 423582-423582.

YANG Guangfeng, LU Mengke, XUE Anyuan, LI Hulin, CUI Jing. Dynamic numerical simulation of aluminum pitting based on 3D-lattice Boltzmann method[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(10): 423582-423582.

参考文献

[1] 顾孜昌. 庆-哈输油管道腐蚀缺陷评估与补强技术研究[D]. 大庆:东北石油大学,2011. GU Z C. Research on evaluation of corrosion defects and reinforcing technology for Qing-Ha oil pipeline[D]. Daqing:Northeast Petroleum University, 2011(in Chinese).
[2] 马明利. 庆-哈输油管道腐蚀缺陷评估与补强技术研究[D]. 大庆:东北石油大学, 2011. MA M L. Research on evaluation of corrosion defects and reinforcing technology for Qing-Ha oil pipeline[D]. Daqing:Northeast Petroleum University, 2011(in Chinese).
[3] 乔贵民,任振甲,张军,等. 腐蚀介质在缓蚀剂膜中扩散行为的分子动力学模拟[J].物理化学学报,2010,26(11):3041-3046. QIAO G M, REN Z J, ZHANG J, et al. Molecular dynamics simulation of corrosive medium diffusion in corrosion inhibitor membrane[J].Acta Physico-Chimica Sinica,2010, 26(11):3041-3046(in Chinese).
[4] 李栾菊,吴海耀,马瑞娜,等. Fe₂B在液锌中腐蚀的分子动力学模拟[J].河北工业大学学报, 2014, 43(2):66-71. LI L J, WU H Y, MA R N, et al. Molecular dynamics simulation of the corrosion process of Fe₂B alloy in liquid zinc[J].Journal of Hebei University of Technology. 2014, 43(2):66-71(in Chinese).
[5] 刘捷,甄琦,赵灿军,等. 铁在液态铅铋合金中腐蚀的分子动力学研究[J].工程热物理学报,2017, 38(3):557-561. LIU J, ZHEN Q, ZHAO C J, et al. Corrosion study of iron liquid Lead-Bismuth eutectic in accelerator driven system of molecular dynamics method[J].Journal of Engineering Thermophysics, 2017, 38(3):557-561(in Chinese).
[6] 陈梦成,温清清. 钢材腐蚀损伤过程的元胞自动机模拟[J].中国腐蚀与防护学报, 2018, 38(1):68-73. CHEN M C, WEN Q Q. Cellular automata simulation of corrosion process for steel[J].Journal of Chinese Society for Corrosion and Protection, 2018, 38(1):68-73(in Chinese).
[7] 胡姗. 基于元胞自动机的再生水管道腐蚀模拟[D]. 天津:天津大学,2017. HU S. A cellular automaton simulation of the reclaimed water pipe corrosion[D]. Tianjin:Tianjin University, 2017(in Chinese).
[8] 芦星,曾敏,马挺,等. 基于元胞自动机法的高温金属腐蚀行为模拟[J].工程热物理学报,2016, 37(9):2016-2022. LU X, ZENG M, MA T, et al. Simulation of metal corrosion layer growth behavior under high temperature by cellular automaton method[J].Journal of Engineering Thermophysics, 2016, 37(9):2016-2022(in Chinese).
[9] 崔艳雨,赵沅沅. 基于元胞自动机法的铝合金腐蚀行为模拟[J].腐蚀与防护,2018, 39(10):794-800. CUI Y Y, ZHAO Y Y. Simulation of aluminum alloy corrosion behavior based on cellular automaton method[J].Corrosion and Protection, 2018, 39(10):794-800(in Chinese).
[10] 邓景辉, 陈平剑, 付裕. 用于预腐蚀航空铝合金材料疲劳寿命分析的腐蚀当量裂纹的抛物线模型[J].航空学报, 2018, 39(2):221421. DENG J H, CHEN P J, FU Y, et al. Parabolic model for corrosion equivalent cracks for fatigue life analysis of pre-corrosive aeroalloy aluminum alloy materials[J].Acta Aeronautica et Astronautica Sinica, 2018, 39(2):221421(in Chinese).
[11] 张福泽. 金属任意腐蚀损伤量的日历寿命计算模型和曲线[J].航空学报, 2017, 38(9):221110. ZHANG F Z. Calendar life calculation model and curve of any metal corrosion damage[J].Acta Aeronautica et Astronautica Sinica, 2017, 38(9):221110(in Chinese).
[12] 张福泽. 用腐蚀损伤计算金属日历寿命的原理和模型[J].航空学报, 2017, 38(11):221111. ZHANG F Z. Principles and models for calculating metal calendar life with corrosion damage[J].Acta Aeronautica et Astronautica Sinica, 2017,38(11):221111(in Chinese).
[13] LIU M, MOSTAGHIMI P. High-resolution pore-scale simulation of dissolution in porous med[J].Chemical Engineering Science, 2017, 161:360-369.
[14] NOGUES J P, FITTS J P, CELIA M A, et al. Permeability evolution due to dissolution and precipitation of carbonates using reactive transport modeling in pore networks[J].Water Resources Research, 2013, 49(9):6006-6021.
[15] HUBER C,SHAFEI B, PARMIGIANI A,et al. A new pore-scale model for linear and non-linear heterogeneous dissolution and precipitation[J].Geochimica et Cosmochimica Acta, 2014,124(1):109-130.
[16] CHEN L,KANG Q,ROBINSON B A,et al. Pore-scale modeling of multiphase reactive transport with phase transitions and dissolution-precipitation processes in closed systems[J].Physical Review E:Statistical Nonlinear & Soft Matter Physics,2013,87(4):043306.
[17] 陈黎. 能源与环境学科中的多尺度多物理化学耦合反应输运过程数值模拟研究[D]. 西安:西安交通大学, 2017. CHEN L. Numerical investigation of multiscale multiple physicochemical coupled reactive transport processes in energy and environmental discipline[D]. Xi'an:Xi'an Jiaotong University, 2017(in Chinese).
[18] 张任良, 狄勤丰, 王新亮, 等. 基于Shan-Chen模型的格子Boltzmann方法在微流动模拟研究中的应用[J].力学与实践, 2012, 34(2):10-18. ZHANG R L, DI Q F, WANG X L, et al. The application of Shan-Chen-type lattice Boltzmann method in microfluidics simulation study[J].Mechanics in Engineering, 2012, 34(2):10-18(in Chinese).
[19] MU Y T, CHEN L, HE Y L, et al. Pore-scale modeling of dynamic interaction between SVOCs and airborne particles with lattice Boltzmann method[J].Building & Environment, 2016, 104:152-161.
[20] PEDERSEN J, JETTESTUENE E, MADLAND M V, et al. A dissolution model that accounts for coverage of mineral surfaces by precipitation in core floods[J].Advances in Water Resources, 2015, 87:68-79.
[21] ATIA A, MOHAMMEDI K. Lattice Boltzmann investigation of thermal effect on convective mixing at the edge of solvent chamber in CO₂-VAPEX process[J].World Journal of Engineering, 2015, 12(4):353-362.
[22] MIN T, GAO Y, CHEN L, et al. Mesoscale investigation of reaction-diffusion and structure evolution during Fe-Al inhibition layer formation in hot-dip galvanizing[J].International Journal of Heat & Mass Transfer, 2016, 92:370-380.
[23] CHEN L, KANG Q, ROBINSON B A, et al. Pore-scale modeling of multiphase reactive transport with phase transitions and dissolution-precipitation processes in closed systems[J].Physical Review E:Statistical Nonlinear & Soft Matter Physics, 2013, 87(4):043306.
[24] BOXLEY C J, WATKINS J J, WHITE H S, et al. Al₂O₃ film dissolution in aqueous chloride solutions[J].Electrochemical and Solid-State Letters, 2003, 6(10):B38.
[25] KANG Q, LICHTNER P C, ZHANG D, et al. Lattice Boltzmann pore-scale model for multicomponent reactive transport in porous media[J].Journal of Geophysical Research Solid Earth, 2006, 111(B5):1-9.
[26] KANG Q, ZHANG D, CHEN S, et al. Lattice Boltzmann simulation of chemical dissolution in porous media[J].Physical Review E:Statistical Nonlinear & Soft Matter Physics, 2002, 65(3):036318.
[27] KANG Q, LICHTNER P C, VISWANATHAN H S, et al. Pore scale modeling of reactive transport involved in geologic CO₂ sequestration[J].Transport in Porous Media, 2010, 82(1):197-213.
[28] LI L, LI X G, DONG C F, et al. Cellular automata modeling on pitting current transients[J].Electrochemistry Communications, 2009, 11(9):1826-1829.
[29] XU X, LIU D, AO N, et al. Effects of pre-corrosion on mechanical properties of 7B50-T7751 aluminum alloy in sodium chloride solution[J].Materials and Corrosion, 2018, 69(7):870-880.
[30] SANCHEZ-PEREZ J, ALHAMA F, MORENO J, et al. Study of main parameters affecting pitting corrosion in a basic medium using the network method[J].Results in Physics, 2019(12):1015-1025.
[31] MCCAFFERTY E. Sequence of steps in the pitting of aluminum by chloride ions[J].Corrosion Science, 2003, 45(7):1421-1438.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于三维格子Boltzmann铝点蚀动态数值模拟

Dynamic numerical simulation of aluminum pitting based on 3D-lattice Boltzmann method

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张福泽. 全机日历寿命确定及相关问题[J]. 航空学报, 2024, 45(3): 229863-229863.
[2]	崔静, 白娟, 牛书鑫, 王一凡, 杨广峰, 王立文. 抑冰功能型表面的耐磨耐蚀特性[J]. 航空学报, 2023, 44(S2): 729288-729288.
[3]	胡宪亮, 乔红超, 赵吉宾, 陆莹, 吴嘉俊, 杨玉奇. 激光冲击波对单晶合金抗热腐蚀性能的影响[J]. 航空学报, 2022, 43(4): 525591-525591.
[4]	肖光明, 张超, 桂业伟, 杜雁霞, 刘磊, 魏东. 基于TLBM-FVM耦合的飞行器舱内热环境跨尺度预测方法[J]. 航空学报, 2021, 42(9): 625710-625710.
[5]	童自翔, 李明佳, 李冬. 导热-辐射耦合传热的多尺度分析和数值模型[J]. 航空学报, 2021, 42(9): 625729-625729.
[6]	管宇, 陈亮, 曹奇凯. 基于增量考核的飞机延寿方法与应用[J]. 航空学报, 2021, 42(8): 525782-525782.
[7]	陈跃良, 陈亮, 卞贵学, 杨翔宁, 管宇, 张勇, 何刚. 先进舰载战斗机腐蚀防护控制与日历寿命设计[J]. 航空学报, 2021, 42(8): 525786-525786.
[8]	刘东, 吴家仁, 周一舟, 刘振祥, 李瑜, 王铭泽. 舰载机综合保障技术实践及发展展望[J]. 航空学报, 2021, 42(8): 525802-525802.
[9]	郭磊, 高远, 辛会. 热障涂层的激光表面改性参数优化和结构设计[J]. 航空学报, 2021, 42(7): 424114-424114.
[10]	张福泽. 求飞机结构真实腐蚀容限的原理和方法[J]. 航空学报, 2021, 42(5): 524457-524457.
[11]	黄海亮, 陈跃良, 张柱柱, 张勇, 卞贵学, 王晨光. 飞机结构常见腐蚀形式仿真研究进展[J]. 航空学报, 2021, 42(5): 524026-524026.
[12]	谭晓明, 张丹峰, 战贵盼, 王德. 海洋环境与疲劳载荷联合作用下喷丸超高强度钢损伤机制[J]. 航空学报, 2020, 41(8): 223631-223631.
[13]	陈亚军, 刘辰辰, 王付胜. 预腐蚀和交替腐蚀作用下航空铝合金多轴疲劳行为及寿命预测[J]. 航空学报, 2019, 40(4): 222465-222465.
[14]	申蒸洋, 陈孝明, 黄领才. 大型水陆两栖飞机特殊任务模式对总体设计的挑战[J]. 航空学报, 2019, 40(1): 522400-522400.
[15]	王芝秀, 朱凡, 郑凯, 李海. 低Cu含量Al-Mg-Si-Cu合金的T78双级时效[J]. 航空学报, 2018, 39(8): 421986-421986.