| [1] Mu Z T, Chen D H, Zhu Z T. Fatigue crack growth behavior of aerospace aluminum alloy LD2 under corrosion[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3): 574-579.(in Chinese) 穆志韬, 陈定海, 朱作涛, 等. 腐蚀条件下LD2航空铝合金裂纹扩展规律研究[J]. 航空学报, 2013, 34(3): 574-579.[2] Burns J T. Effect of corrosion severity on fatigue evolution in Al-Zn-Mg-Cu[J]. Corrosion Science, 2010, 52(2): 498-508.[3] Wanhill R J H. Aircraft corrosion and fatigue damage assessment, NLR Technical Publication TP 94401 L. 1994.[4] Liu M T, Liu J H, Zhong P. Ultra-high-strength steel corrosion resistance research progress[J]. Science & Technology review, 2010(9): 112-115.(in Chinese) 柳木桐, 刘建华, 钟平. 超高强度钢耐腐蚀性能研究进展[J]. 科技导报, 2010(9): 112-115.[5] Wang Z P, Xu T J, Su J X.Research on relationship of civil aircraft cargo compartment corrosion and its influencing factors based on data model[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(5): 940-948. (in Chinese) 王志平, 徐天杰, 苏景新. 基于数据模型的某型民用飞机货舱区域腐蚀影响因素研究[J]. 航空学报, 2012, 33(5): 940-948[6] Zhang H P, Wang C X. The development and research of 300M ultra high strength steel for aircraft landing gear[J]. Journal of Harbin University of Science and technology, 2011(16): 73-76. (in Chinese) 张慧萍, 王崇勋. 飞机起落架用300M超高强度钢发展及研究现状[J]. 哈尔滨理工大学学报, 2011(16): 73-76.[7] Liu T Q, Li Z. The influence of two kinds of heat treatment heating medium for fatigue performance of 300M steel[J]. Failure Analysis and Prevention. 2006(3): 15-18. (in Chinese) 刘天琦, 李志. 两种热处理加热介质对300M钢疲劳性能的影响[J]. 失效分析与预防, 2006(3): 15-18.[8] Ma Y T, Li Y, Wang F. Corrosion of low carbon steel in atmospheric environments of different chloride content[J]. Corrosion Science, 2009, 51(5): 997-1006.[9] Corvo F, Minotas J, Delgado J, et al. Changes in atmospheric corrosion rate caused by chloride ions depending on rain regime[J]. Corrosion Science, 2005, 47(4): 883-892.[10] Liu D X, Jin S. The study of stress corrosion behavior and mechanism for 300M ultra high strength coating steel[J]. Journal of Xi'an Jiaotong University, 1998, 32(6): 49-52. (in Chinese) 刘道新, 金石. 带镀层300M超高强度钢应力腐蚀行为与机理研究[J]. 西安交通大学学报, 1998, 32(6): 49-52.[11] Graca M L A, Hoo C Y, Silva O M M. Failure analysis of a 300M steel pressure vessel[J]. Engineering Failure Analysis, 2009, 16(1): 182-186.[12] Zhang M L, Zhu L Q, Liu H C, et al. Corrosion behavior of 300M ultra-high strength steel in simulated gap water environment[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(4): 954-962. (in Chinese) 张睦林, 朱立群, 刘慧丛, 等. 300M超高强度钢在模拟积水环境中的腐蚀行为[J]. 航空学报, 2013, 34(4): 954-962.[13] Zhang D. Corrosion and corrosion control of aircraft structure[M]. Beijing: National Defense Industruy Press, 1993: 64-71. (in Chinese) 张栋. 飞机结构的腐蚀与腐蚀控制[M]. 北京: 国防工业出版社, 1993: 64-71.[14] Liu D X. Corrosion and protection of materials[M]. Xi'an: Northwestern Polytechnical University Press, 2006: 15-17. (in Chinese) 刘道新. 材料的腐蚀与防护[M]. 西安: 西北工业大学出版社, 2006: 15-17.[15] Xu H P, Liu H C, Zhu L Q. The influence of exposed area of high strength aluminum alloy for corrosion behavior[J]. Journal of Materials Engnieering, 2010(5): 41-46.(in Chinese) 徐火平, 刘慧丛, 朱立群. 盐水环境下高强铝合金暴露面积对腐蚀行为的影响[J]. 材料工程, 2010(5): 41-46[16] Lodhi Z F, Mol J M C, Hovestad A, et al. Corrosion resistance of Zn-Co-Fe alloy coatings on high strength steel[J]. Surface & Coatings Technology, 2009, 203(10):1415-1422.[17] Huang Y, Liu H C, Zhu L Q, et al. Study on corrosion behavior of 30CrMnSiNi2A steels in simulated tank water environment[J]. Journal of Materials Engnieering, 2012(4): 88-93.(in Chinese) 黄颐, 刘慧丛, 朱立群, 等. 30CrMnSiNi2A钢在模拟油箱积水溶液中的腐蚀行为研究[J]. 材料工程, 2012 (4): 88-93.[18] Cao C N, Zhang J Q. An introduction to electrochemical impedance spectroscopy[M]. Beijing: Science Press, 2002: 106-107. (in Chinese) 曹楚南, 张鉴清. 电化学阻抗谱导论[M]. 北京: 科学出版, 2002: 106-107. |
CJA
