| [1] Wu K, He N, Liao W H, et al. Study on machining deformations and their control approaches of the thin-web in end milling. China Mechanical Engineering, 2004, 15(8): 670-674. (in Chinese) 武凯, 何宁, 廖文和, 等. 薄壁腹板加工变形规律及其变形控制方案的研究. 中国机械工程, 2004, 15(8): 670-674.[2] Bai W J, Ke Y L, Wu H B, et al. Numerical simulation and analysis of symmetry and step-symmetry milling of aerospace thin-walled workpiece. China Mechanical Engineering, 2009, 20(2): 214-217.(in Chinese) 白万金, 柯映林, 吴红兵, 等. 航空薄壁件对称及阶梯对称铣削的数值仿真与分析. 中国机械工程, 2009, 20(2): 214-217.[3] Zhang C, Zhou L S, An L L, et al. Modeling and wear-induced error compensation of ball-end milling cutter wear. Journal of Mechanical Engineering, 2008, 44(2): 207-218. (in Chinese) 张臣, 周来水, 安鲁陵, 等. 球头铣刀刀具磨损建模与误差补偿. 机械工程学报, 2008, 44(2): 207-218.[4] Wan M, Zhang W H, Qin G H, et al. Strategies for error prediction and error control in peripheral milling of thin-walled workpiece. International Journal of Machine Tools and Manufacture, 2008, 48(12-13): 1366-1374.[5] Rai J K, Xirouchakis P. Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components. International Journal of Machine Tools and Manufacture, 2008, 48(6): 629-643.[6] Bera T C, Desai K A, Rao P V M. Error compensation in flexible end milling of tubular geometries. Journal of Materials Processing Technology, 2011, 211(1): 24-34.[7] Habibi M, Arezoo B, Vahebi Nojedeh M. Tool deflection and geometrical error compensation by tool path modification. International Journal of Machine Tools and Manufacture, 2011, 51(6): 439-449.[8] Zhou X L, Zhang W H, Qin G H, et al. On optimizing fixture layout and clamping force simultaneously using genetic algorithm. Mechanical Science and Technology, 2005, 24(3): 340-342.(in Chinese) 周孝伦, 张卫红, 秦国华, 等. 基于遗传算法的夹具布局和夹紧力同步优化. 机械科学与技术, 2005, 24(3): 340-342.[9] Liu S G, Zheng L, Zhang Z H, et al. Optimization of the number and positions of fixture locators in the peripheral milling of a low-rigidity workpiece. The International Journal of Advanced Manufacturing Technology, 2006, 33(7-8): 668-676.[10] Sánchez H T, Estrems M, Faura F. Analysis and compensation of positional and deformation errors using integrated fixturing analysis in flexible machining parts. The International Journal of Advanced Manufacturing Technology, 2006, 29(3): 239-252.[11] Chen W F, Lou P H, Chen H. Active compensation methods of machining deformation of thin-walled parts. Acta Aeronautica et Astronautica Sinica, 2009, 30(3): 570-576.(in Chinese) 陈蔚芳, 楼佩煌, 陈华. 薄壁件加工变形主动补偿方法. 航空学报, 2009, 30(3): 570-576.[12] Fan K G, Yang J G, Yao X D, et al. Error compensation for shaft parts in batch manufacture based on Newton interpolation. Journal of Mechanical Engineering, 2011, 47(9): 112-116. (in Chinese) 范开国, 杨建国, 姚晓栋,等. 基于牛顿插值的批量轴类零件加工误差补偿. 机械工程学报, 2011, 47(9): 112-116.[13] Wang G, Shan Y, Wu R R. Compensation of electrode orbiting in electrical discharge machining based on non-uniform offsetting. Journal of Zhejiang University: Engineering Science, 2006(9): 1604-1608. (in Chinese) 王刚, 单岩, 吴荣仁. 电火花摇动加工中的曲面非均匀偏置补偿技术. 浙江大学学报: 工学版, 2006 (9): 1604-1608.[14] Bai Y, Zhang D H, Ren J X, et al. High quality geometric modeling of blade. Mechanical Science and Technology, 2003, 22 (3): 447-449. (in Chinese) 白瑀, 张定华, 任军学, 等. 叶片高质量造型方法研究. 机械科学与技术, 2003, 22 (3): 447-449.[15] Bentamy A, Guibault F, Trepanier J Y. Cross-sectional design with curvature constraints. Computer-Aided Design, 2005, 37 (14): 1499-1508.[16] Shan C W, Zhang D H, Liu W W, et al. A novel spiral machining approach for blades modeled with four patches. The International Journal of Advanced Manufacturing Technology, 2009, 43 (5): 563-572.[17] Poliakoff J F, Wong Y K, Thomas P D. An automated curve fairing algorithm for cubic B-spline curves. Journal of Computational and Applied Mathematics, 1999, 102 (1): 73-85.[18] Hsu T H, Lai J Y, Ueng W D. On the development of airfoil section inspection and analysis technique. The International Journal of Advanced Manufacturing Technology, 2006, 30 (1): 129-140. |
CJA
