导航
Archive
Research progress of additive manufacturing of TiAl alloys
WANG Maosong, DU Yulei
doi: 10.7527/S1000-6893.2021.25263
2021, (7): 625263-625263.
PDF [ 16837 K ]( 656 ) HTML
Automatic partition algorithm for profile feature machining of aircraft structural parts
GAO Xin, LI Renzheng, WANG Binli, LI Weidong, ZHAO Zhonggang
doi: 10.7527/S1000-6893.2021.25346
2021, (7): 625346-625346.
PDF [ 4646 K ]( 214 ) HTML
Microstructure and wear resistance of TiCx reinforced Ti-based laser cladding coating with rare earth
ZHANG Zhiqiang, YANG Fan, ZHANG Hongwei, ZHANG Tiangang
doi: 10.7527/S1000-6893.2020.24115
2021, (7): 624115-624115.
PDF [ 7564 K ]( 257 ) HTML
Surface and subsurface damage mechanisms in tangential ultrasonic-assisted grinding of ZrO2 ceramics
YAN Yanyan, ZHANG Yafei, ZHANG Zhaoqing
doi: 10.7527/S1000-6893.2020.24749
2021, (7): 624749-624749.
PDF [ 3924 K ]( 250 ) HTML
Preparation and evaluation of carbon fiber/polyimide composite attaching collars based on high temperature resin transfer mould process
LUO Chuyang, JIANG Shengda, CHEN Mengxiong, ZHANG Peng, XIA Xufeng, CAI Peipei
doi: 10.7527/S1000-6893.2021.25438
2021, (7): 625438-625438.
PDF [ 15768 K ]( 356 ) HTML
Future urban air mobility management: Review
ZHANG Honghai, ZOU Yiyuan, ZHANG Qiqian, LIU Hao
doi: 10.7527/S1000-6893.2020.24638
2021, (7): 24638-024638.
PDF [ 5684 K ]( 1004 ) HTML
Research development of small object traching based on deep learning
LI Hongguang, YU Ruonan, DING Wenrui
doi: 10.7527/S1000-6893.2020.24691
2021, (7): 24691-024691.
PDF [ 6818 K ]( 2170 ) HTML
Effect of mass flow ratios on film cooling characteristics of endwall: Experimental study
YANG Yuquan, LIU Cunliang, ZHANG Jie, HUANG Rong
doi: 10.7527/S1000-6893.2020.24399
2021, (7): 124399-124399.
PDF [ 8439 K ]( 136 ) HTML
Effects of slot-inlet arrangement at infrared-suppressor-integrated rear airframe on flow organization and infrared radiation characteristics
YANG Zongyao, ZHANG Jingzhou, SHAN Yong
doi: 10.7527/S1000-6893.2020.24445
2021, (7): 124445-124445.
PDF [ 20022 K ]( 422 ) HTML
Breakup mechanism of inviscid liquid transverse jet in shear airflow
DENG Tian, LI Jiazhou, CHEN Wei
doi: 10.7527/S1000-6893.2020.24464
2021, (7): 124464-124464.
PDF [ 6222 K ]( 357 ) HTML
Effects of initial conditions on water landing performance of amphibious aircraft
LU Yujin, XIAO Tianhang, DENG Shuanghou, ZHI Haolin, ZHU Zhenhao, LU Zhaoyan
doi: 10.7527/S1000-6893.2020.24483
2021, (7): 124483-124483.
PDF [ 14009 K ]( 380 ) HTML
High-accuracy aerodynamic optimization of hypersonic vehicles based on continuous adjoint
GAO Chang, LI Zhengzhou, HUANG Jiangtao, HE Yuanyuan, WU Yingchuan, LE Jialing, GUI Feng
doi: 10.7527/S1000-6893.2020.24490
2021, (7): 124490-124490.
PDF [ 10446 K ]( 537 ) HTML
Simulation of magnetohydrodynamic heat shield system on reusable launch vehicles
DING Mingsong, LIU Qingzong, JIANG Tao, DONG Weizhong, GAO Tiesuo, FU Yang'aoxiao
doi: 10.7527/S1000-6893.2020.24501
2021, (7): 124501-124501.
PDF [ 11584 K ]( 311 ) HTML
RBF data transfer based on physical gradient modification
LIU Zhikan, LIU Shenshen, LIU Xiao, ZENG Lei, DAI Guangyue
doi: 10.7527/S1000-6893.2020.24506
2021, (7): 124506-124506.
PDF [ 12778 K ]( 346 ) HTML
Integrated computing method for ablative thermal protection system of reentry vehicles
ZHOU Yinjia, ZHANG Zhixian, FU Xinwei, A Rong
doi: 10.7527/S1000-6893.2020.24520
2021, (7): 124520-124520.
PDF [ 2320 K ]( 292 ) HTML
State-space representation of aerodynamica of flying wing with low aspect ratio at high angles of attack
WANG Yanling, BU Chen, YANG Wen, SHEN Yanjie, FENG Shuai
doi: 10.7527/S1000-6893.2020.24539
2021, (7): 124539-124539.
PDF [ 6009 K ]( 356 ) HTML
Numerical investigation of nozzle flow separation control using plasma actuation
LI Chengcheng, LI Fang, YANG Bin, WANG Ying
doi: 10.7527/S1000-6893.2020.24547
2021, (7): 124547-124547.
PDF [ 7325 K ]( 148 ) HTML
Interaction between 1.5-stage turbine rim seal purge flow and mainstream and flow interference between rim seals affected by rim seal structure
HUANG Jingwei, FU Weiliang, MA Guojun, WANG Guojie, GAO Jie
doi: 10.7527/S1000-6893.2020.24549
2021, (7): 124549-124549.
PDF [ 15141 K ]( 300 ) HTML
Tie-dye algorithm based on finite difference method for unstructured grid
LIU Jun, WEI Yanxin, CHEN Jie
doi: 10.7527/S1000-6893.2020.24557
2021, (7): 124557-124557.
PDF [ 6337 K ]( 243 ) HTML
Effects of tandem-wing interactions on aerodynamics of hovering dragonflies
PENG Liansong, ZHENG Mengzong, PAN Tianyu, SU Guanting, LI Qiushi
doi: 10.7527/S1000-6893.2020.24571
2021, (7): 124571-124571.
PDF [ 12401 K ]( 457 ) HTML
Leading edge design method based on curvature distribution control
TONG Xin, QIANG Xiaoqing, YU Peixiang, OUYANG Hua
doi: 10.7527/S1000-6893.2020.24712
2021, (7): 124712-124712.
PDF [ 9314 K ]( 262 ) HTML
Performance coupling analysis and optimal design of rocket-assisted turbine-based combined cycle engines
GUO Feng, ZHU Jianfeng, YOU Yancheng, XING Fei
doi: 10.7527/S1000-6893.2020.24755
2021, (7): 124755-124755.
PDF [ 10427 K ]( 397 ) HTML
Convective heat transfer of chevron-nozzle jet impingement on semi-circular surfaces
LYU Yuanwei, ZHANG Jingzhou, SHAN Yong, SUN Wenjing
doi: 10.7527/S1000-6893.2020.24762
2021, (7): 124762-124762.
PDF [ 20681 K ]( 354 ) HTML
Bow shock wave control and drag reduction by plasma synthetic jet
CHEN Jiazheng, HU Guotun, FAN Guochao, CHEN Weifang
doi: 10.7527/S1000-6893.2020.24773
2021, (7): 124773-124773.
PDF [ 7796 K ]( 323 ) HTML
Research on film cooling performance of sister hole based on structural parameter analysis
WANG Jin, SUN Jie, ZHAO Zhanming, ZHANG Bo, REN Xiaodong, XIE Gongnan
doi: 10.7527/S1000-6893.2020.24775
2021, (7): 124775-124775.
PDF [ 6262 K ]( 125 ) HTML
Parametric reduced-order model of unsteady aerodynamics based on incremental learning algorithm
CHEN Zhiqiang, LIU Zhanhe, MIAO Nan, FENG Wei
doi: 10.7527/S1000-6893.2021.25103
2021, (7): 125103-125103.
PDF [ 8249 K ]( 160 ) HTML
Dynamic influence analysis of structural parameters on collision rebound of arresting hook
PENG Yiming, ZHANG Zhao, WEI Xiaohui, NIE Hong, XIE Pengpeng
doi: 10.7527/S1000-6893.2020.24406
2021, (7): 224406-224406.
PDF [ 6697 K ]( 488 ) HTML
Fast analysis method of deflection efficiency for thrust axial-symmetric vectoring exhaust nozzle
ZHANG Zhe, WANG Hanping, JIN Wendong, ZHANG Baozhen, CHENG Mengwen
doi: 10.7527/S1000-6893.2020.24429
2021, (7): 224429-224429.
PDF [ 3003 K ]( 159 ) HTML
Parametric study on buoyancy-lifting aerial vehicle with low pressure energy storage method
LI Guanxiong, WANG Jingyu, WANG Yuntao
doi: 10.7527/S1000-6893.2020.24438
2021, (7): 224438-224438.
PDF [ 6640 K ]( 255 ) HTML
Reversed time sequence dynamic load identification method using time delay neural network
XIA Peng, YANG Te, XU Jiang, WANG Le, YANG Zhichun
doi: 10.7527/S1000-6893.2020.24452
2021, (7): 224452-224452.
PDF [ 6714 K ]( 259 ) HTML
Multidimensional coupled modeling for solar powered UAV energy system
GAO Ming, YU Weichen, WANG Shanshan, WANG Rongchuang, SHI Jianjiang
doi: 10.7527/S1000-6893.2020.24461
2021, (7): 224461-224461.
PDF [ 10976 K ]( 365 ) HTML
Design optimization and evaluation method for time-triggered communication scheduling in airborne networks
HE Feng, LI Ershuai, ZHOU Xuan, LI Haoruo, GONG Zijie
doi: 10.7527/S1000-6893.2020.24258
2021, (7): 324258-324258.
PDF [ 3488 K ]( 273 ) HTML
Hybrid force/pose control of wire-driven parallel suspension system based on stiffness optimization
GAO Zhongxin, WANG Xiaoguang, WU Jun, LIN Qi
doi: 10.7527/S1000-6893.2020.24373
2021, (7): 324373-324373.
PDF [ 9990 K ]( 144 ) HTML
Performance evaluation method for inertial system based on hierarchical belief rule base
DONG Xinhao, ZHOU Zhijie, HU Changhua, FENG Zhichao, CAO You
doi: 10.7527/S1000-6893.2020.24456
2021, (7): 324456-324456.
PDF [ 5105 K ]( 307 ) HTML
Airport network delay prediction based on Agent model
WANG Chunzheng, HU Minghua, YANG Lei, ZHAO Zheng, SHAN Jing
doi: 10.7527/S1000-6893.2020.24604
2021, (7): 324604-324604.
PDF [ 4980 K ]( 271 ) HTML
Optimization and identification of shooter model and its influence on image guidance
WANG Hui, LI Tao, TANG Daoguang, WU Junxiong, ZHANG Yi, LI Haiqing
doi: 10.7527/S1000-6893.2020.24607
2021, (7): 324607-324607.
PDF [ 7396 K ]( 248 ) HTML
Multi-agent formation cooperative control using relative bearing information and single-spacing measurement
YE Jiesong, GONG Baichun, LI Shuang, DU Yanli, HAO Mingrui
doi: 10.7527/S1000-6893.2020.24610
2021, (7): 324610-324610.
PDF [ 5564 K ]( 334 ) HTML
Extraction algorithm for line of sight angular rate in non-Gaussian correlative noise environment
ZHANG Duo, SONG Jianmei, ZHAO Liangyu, JIAO Tianfeng, DING Guoqiang
doi: 10.7527/S1000-6893.2020.24629
2021, (7): 324629-324629.
PDF [ 3481 K ]( 138 ) HTML
Modeling and control of fuel cell cathode gas supply system for UAV
ZHAO Dongdong, ZHAO Guosheng, XIA Lei, FANG Chun, MA Rui, HUANGFU Yigeng
doi: 10.7527/S1000-6893.2020.24659
2021, (7): 324659-324659.
PDF [ 7985 K ]( 257 ) HTML
Optimization of space vector modulation strategy based on hybrid inverter
WANG Xiaolin, LIU Yuting, GU Cong, PENG Xuheng
doi: 10.7527/S1000-6893.2020.24673
2021, (7): 324673-324673.
PDF [ 9926 K ]( 74 ) HTML
Nonlinear filter robust to outlier and unknown observation noise
FANG Anran, LI Dan, ZHANG Jianqiu
doi: 10.7527/S1000-6893.2020.24675
2021, (7): 324675-324675.
PDF [ 4786 K ]( 180 ) HTML
Self-repairing method for BRAM based on cold backup multi-mode redundancy structure
ZHANG Zhai, LIU Yan, HUANG Lili
doi: 10.7527/S1000-6893.2020.24676
2021, (7): 324676-324676.
PDF [ 9660 K ]( 128 ) HTML
Air traffic network motif recognition and sub-graph structure resilience evaluation
WANG Xinglong, SHI Zongbei, CHEN Ziyan
doi: 10.7527/S1000-6893.2020.24715
2021, (7): 324715-324715.
PDF [ 3728 K ]( 252 ) HTML
Laser modification parameters optimization and structural design of thermal barrier coatings
GUO Lei, GAO Yuan, XIN Hui
doi: 10.7527/S1000-6893.2020.24114
2021, (7): 424114-424114.
PDF [ 4922 K ]( 356 ) HTML
High-speed dynamic performance of cylindrical roller bearing with V-shape pocket
LIU Yanbin, DENG Zenghui, SANG Deyu
doi: 10.7527/S1000-6893.2020.24135
2021, (7): 424135-424135.
PDF [ 9342 K ]( 255 ) HTML
Microstructure and properties of TiC-TiB2 composite phase Ti-based rare earth laser cladding layers
ZHANG Tiangang, ZHANG Qian, ZHUANG Huaifeng, LI Baoxuan, XU Yutong
doi: 10.7527/S1000-6893.2020.24139
2021, (7): 424139-424139.
PDF [ 13956 K ]( 176 ) HTML
Development of buckling model and failure criterion of sandwich structure
CAO Pengyu, NIU Kangmin
doi: 10.7527/S1000-6893.2020.24669
2021, (7): 424669-424669.
PDF [ 3642 K ]( 321 ) HTML
Academic Quality
Download Ranking