直升机总体设计思路和方法发展分析

doi:10.7527/S1000-6893.2015.0271

Abstract

Abstract:

The general design has a key influence on the successful development of a helicopter.With the development of the relevant disciplines of helicopter and IT technique,the helicopter general design has developed from traditional prototype design method,parameter statistics method to modern "multidisciplinary design optimization method".Especially the application of the ideas of system engineering,concurrent engineering and modern program management in the development of aviation products produces great influence on the helicopter general design idea,pushing helicopter general design to develop towards intelligence,synthesis and systematization.Firstly,the development of helicopter general design methods is reviewed briefly,and the application of the traditional and modern design methods in the helicopter development and the differences between those methods are introduced.Then,the influences on the ideas and methods of helicopter general design produced by such aspects as the ideas of system engineering,concurrent engineering and modern program management,the helicopter new configuration and new digital technology are analyzed.Finally the development trends of helicopter general design methods are prospected.

Key words: helicopter, general design, design synthesis, prototype method, multidisciplinary design optimization

CLC Number:

NI Xianping, ZHU Qinghua. Development of ideas and methods of helicopter general design[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(1): 17-29.

References

[1] STEPHEN G K.Guide for conceptual helicopter design[D].Monterey:Naval Postgraduate School,1983.
[2] ALLEN C H.An analysis of three approaches to the helicopter preliminary design problem[D].Monterey:NAVAL Postgraduate School,1984.
[3] RUTHERFORD C J W,STROZIER C J K.Formulation of a helicopter preliminary design course[C]//Proceedings of AIAA Aircraft Design,Systems and Technology Meeting.Reston:AIAA,1983.
[4] PROUTY R W.Helicopter design technology[M].2nd ed.Malabar:Kieger Publishing Company,1998.
[5] MARAT N T,VENGALATTORE T N,INDERJIT C.Preliminary design of transport helicopters[J].Journal of the American Helicopter Society,2003,48(2):71-79.
[6] JOHN R B,DONALD J M,BRENDA J,et al.Integrated helicopter design tools[C]//Proceedings of the 52nd AHS Annual Forum.Fairfax,VA:AHS Press,1996.
[7] 张呈林,郭才根.直升机总体设计[M].北京:国防科技出版社,2006:1-7,22,136-150.ZHAND C L,GUO C G.Helicopter general design[M].Beijing:National Defense Industry Press,2006:1-7,22,136-150(in Chinese).
[8] 刘虎,罗明强,田永亮,等.飞机总体设计支持技术探索与实践[M].北京:北京航空航天大学出版社,2013:3-12.LIU H,LUO M Q,TIAN Y L,et al.Exploration and practice of supporting technology for aircraft conceptual design[M].Beijing:Beihang University Press,2013:3-12(in Chinese).
[9] 顾诵芬.飞机总体设计[M].北京:北京航空航天大学出版社,2001.GU S F.Aircraft general design[M].Beijing:Beihang University Press,2001(in Chinese).
[10] 倪先平,蔡汝鸿,曹喜金,等.直升机技术发展现状与展望[J].航空学报,2003,24(1):15-20.NI X P,CAI R H,CAO X J,et al.Present situation and prospects of helicopter technology[J].Acta Aeronautica et Astronautica Sinica,2003,24(1):15-20(in Chinese).
[11] LEISHMAN J G.A chronicle of early British rotorcraft[C]//Proceedings of the 60th Annual Forum and Technology Display of the AHS.Fairfax,VA:AHS Press,2004.
[12] 倪先平.直升机参数选择方法浅析[C]//第三届全国直升机年会论文集.北京:中国航空学会,1987:146-159.NI X P.Analysis for the selection methods of a helicopter parameters[C]//Proceedings of the 3rd Annual Forum of China Helicopter Society.Beijing:CSAA,1987:146-159(in Chinese).
[13] 倪先平.直升机总体参数优化选择[C]//第一届全国飞机总体设计学术交流会论文集.北京:中国航空学会,1991.NI X P.The optimization selection for the general parameters of a helicopter[C]//Proceedings of the 1st Annual Forum of Aircraft General Design.Beijing:CSAA,1991(in Chinese).
[14] LIOR M.Statistical methods for helicopter preliminary design and sizing[C]//Proceedings of the 31st European Rotorcraft Forum.Bonn,Germany:ERF Press,2005.
[15] 普劳蒂 R W.直升机性能及稳定性和操纵性[M].高正,陈文轩,施永立,译.北京:航空工业出版社,1990.PROUTY R W.Helicopter performance,stability and control[M].GAO Z,CHEN W X,SHI Y L,translated.Beijing:Aviation Industry Press,1990(in Chinese).
[16] JAEHOON L,SANG J S.Development of an advanced rotorcraft preliminary design framework[J].International Journal of Aeronautical & Space Sciences,2009,10(2):134-139.
[17] ROCCHETTO A,POLONI C.A hybrid numerical optimization technique based on genetic and feasible direction algorithms for multipoint helicopter rotor blade design[C]//Proceedings of the 1st European Rotorcraft Forum.Bonn,Germany:ERF Press,1995.
[18] PALASIS D,WAGNER S.Development of a conceptual design method for rotor-wing aircraft using digital computers[C]//Proceedings of the 17th European Rotorcraft Forum.Bonn,Germany:ERF Press,1991.
[19] 张呈林,彭名华.直升机总体设计技术的新进展[J].航空制造技术,2010(13):57-60.ZHANG C L,PENG M H.New progress of general design technology for helicopter[J].Aeronautical Manufacturing Technology,2010(13):57-60(in Chinese).
[20] ROSENSTEIN HAROLD J,STANZIONE KAYDON A.Computer aided helicopter design[C]//Proceedings of the 37th AHS Annual Forum.Fairfax,VA:AHS Press,1981:112-127.
[21] SCHRAGE D P,MAVRIS D N,WASIKOWSKI M.GTPDP:A rotor wing aircraft preliminary design and performance estimation program including optimization and cost[C]//Proceedings of AHS Vertical Lift Aircraft Design Conference.Fairfax,VA:AHS Press,1986.
[22] BANERJEE D,SHANTHAKUMARAN P.Application of numerical optimization methods in helicopter industry[C]//Proceedings of the 13th European Rotorcraft Forum.Bonn,Germany:ERF Press,1987:1-37.
[23] MAVRIS D N,de LAURENTIS D A,BANDTE O,et al.A stochastic approach to multi-disciplinary aircraft analysis and design[C]//Proceedings of AIAA 36th Aerospace Sciences Meeting and Exhibit.Reston:AIAA,1998.
[24] STEVENS J M G F,BOER J F,LAMME W F,et al.Helicopter pre-design strategy:Design-to-mass or design-to-cost? NLR-TP-2009-306[R].Amsterdam:NLR,2010.
[25] 彭名华,张呈林.直升机总体多学科优化设计[J].直升机,2010(3):11-16.PENG M H,ZHANG C L.Helicopter conceptual/preliminary multidisciplinary design optimization[J].Helicopter,2010(3):11-16(in Chinese).
[26] 彭名华.直升机总体多学科设计优化研究[D].南京:南京航空航天大学,2009.PENG M H.Research on helicopter conceptual/prelimi-nary multidisciplinary design optimization[D].Nanjing:Nanjing University of Aeronautics & Astronautics,2009(in Chinese).
[27] DANIEL P S.Technology for rotorcraft affordability through integrated product/process development(IPPD)[C]//Proceedings of the 55th AHS Annual Forum.Fairfax,VA:AHS Press,1999.
[28] HIRSH J E,WILKERSON J B,NARDUCCI R P.An integrated approach to rotorcraft conceptual design[C]//Proceedings of AIAA 45th Aerospace Sciences Meeting and Exhibit.Reston:AIAA,2007.
[29] DANIEL P S,WILLIAM M C.Integrated product/process development approach for balancing technology push and pull between the user and developer[C]//Proceedings of the 68th AHS Annual Forum.Fairfax,VA:AHS Press,2012.
[30] WAYNE J.NDARC-NASA design and analysis of rotorcraft validation and demonstration[C]//Proceedings of the American Helicopter Society Aeromechanics Specialists' Conference.Fairfax,VA:AHS Press,2010.
[31] MICHAEL A,RAJNEESH S.OpenMDAO/NDARC framework for assessing performance impact of rotor technology integration[C]//Proceedings of the 70th AHS Annual Forum.Fairfax,VA:AHS Press,2014.
[32] BASSET P M,TREMOLET A,CUZIEUX F,et al.The CREATION project for rotorcraft concepts evaluation:The first steps[C]//Proceedings of the 37th European Rotorcraft Forum.Bonn,Germany:ERF Press,2011.
[33] WILLIAM A C,DAVID H L.The genetic algorithm as an automated methodology for helicopter conceptual design[J].Journal of Engineering Design,1997,8(3):231-250.
[34] EMRE G M,ADEEL K,DANIEL P S.Weight estimation using CAD in the preliminary rotorcraft design[C]//Proceedings of the 33rd European Rotorcraft Forum.Bonn,Germany:ERF Press,2007.

Development of ideas and methods of helicopter general design

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	SUN Canfei, HUANG Linran, SHEN Yong. Fault diagnosis of helicopter planetary gear transmission system under complex operating conditions [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(8): 625480-625480.
[2]	FEI Zhongyang, JIANG Xiangwen, ZHAO Qijun. Design of helicopter target rotor based on similar dynamic RCS characteristics [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 125465-125465.
[3]	JI Honglei, SU Junjie, CHEN Renliang, KONG Weihong. Highland atmospheric turbulence model for helicopter flight simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 126564-126564.
[4]	ZHA Jianping, WANG Fengjiao, GUO Junxian, LI Mingqiang. An overview of noise source control technology for helicopter main gearbox [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526123-526123.
[5]	ZHANG Yuhang, HAN Dong, WAN Haoyun. Rotor performance improvement by blade piecewise linear twist [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225264-225264.
[6]	WAN Haoyun, HAN Dong, ZHANG Yuhang. Performance improvement of variable speed tail rotors by passively extendable chord [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(2): 224981-224981.
[7]	YANG Zongyao, ZHANG Jingzhou, SHAN Yong. Effects of slot-inlet arrangement at infrared-suppressor-integrated rear airframe on flow organization and infrared radiation characteristics [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 124445-124445.
[8]	YE Nianhui, LONG Teng, WU Yufei, TANG Yifan, SHI Renhe. Kriging-assisted constrained differential evolution algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(6): 324580-324580.
[9]	CHEN Yaping, YU Jianjian, HU Lei, WANG Yutang. Characteristics and application of bending moments of helicopter rotor shaft [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524168-524168.
[10]	LI Yanqing, XUAN Yimin. Coupling analysis method for helicopter thermal management and infrared radiation characteristics [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(3): 124270-124270.
[11]	WANG Luofeng, CHEN Renliang. Rigid-elastic coupled flight dynamic modeling and air resonance stability analysis for heavy lift helicopter [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 124634-124634.
[12]	LI Zhengzhou, HE Yuanyuan, GAO Chang, ZHANG Xiaoqing, WANG Qi. Optimization of aeroshape integrated design of winged re-entry vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623356-623356.
[13]	HAN Zhonghua, XU Chenzhou, QIAO Jianling, LIU Fei, CHI Jiangbo, MENG Guanyu, ZHANG Keshi, SONG Wenping. Recent progress of efficient global aerodynamic shape optimization using surrogate-based approach [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623344-623344.
[14]	ZHOU Jinlong, DONG Linghua, YANG Weidong. Hysteresis modeling and suppression of piezoelectric actuator for helicopter trailing-edge flaps [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(4): 223384-223384.
[15]	HU Jianping, XU Guohua, SHI Yongjie, WU Linbo. Formation mechanism of brownout in full-scale helicopter based on CFD-DEM couplings numerical simulation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(3): 123363-123363.