GH4169DA磨削表面变质层软化机理

doi:10.7527/S1000-6893.2013.0378

Abstract

Abstract:

In order to study the softening mechanism of the grinding surface metamorphic layer of superalloy GH4169DA, the microstructure, Vickers hardness and γ" phase density of the metamorphic layer are investigated by the metallographic microscope, micro Vickers and transmission electron microscopy (TEM). The results show that there is softening and local plastic deformation on the grinding surface and sub-surface of GH4169DA. In the range of the test parameters, the depth of the softened layer is approximately 30 μm to 100 μm, and the depth of the deformed layer is only about 4 μm. From the matrix to the grinding surface, the number of γ" phase per square micron decreases gradually from about 2.27×10³ to zero, and the γ" phase disappears completely within 2.2 μm depth of the grinding surface. The causes of the γ" phase density vari-ation are basically the same as the variation of microhardness. The softening mechanism of the grinding surface of GH4169DA is that the main strengthening phase γ" density decreases and its enhancement effect weakens under the action of the heat generated by the grinding process.

Key words: superalloys, Inconel 718, grinding, surface properties, metamorphic layer, micro-hardness, phase transitions

CLC Number:

DU Suigeng, JIANG Zhe, ZHANG Dinghua, JU Jiangtao, LI Na. Softening Mechanism of Grinding Surface Metamorphic Layer of GH4169DA[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(5): 1446-1451.

References

[1] Hong S J, Chen W P, Wang T W. A diffraction study of the γ" phase in INCONEL 718 superalloy[J]. Metallurgical and Materials Transactions A, 2001, 32(8):1887-1901.

[2] Dehmas M, Lacaze J, Niang A, et al. TEM study of high-temperature precipitation of delta phase in Inconel 718[J]. Advances in Materials Science and Engineering, 2011, 2011: 1-9.

[3] Chang S H. In situ TEM observation of γ', γ" and δ precipitations on Inconel 718 superalloy through HIP treatment[J]. Journal of Alloys and Compounds, 2009,486 (1-2): 716-721.

[4] Zhang H Y, Zhang S H, Cheng M, et al. Deformation characteristics of δ phase in the delta-processed Inconel 718 alloy[J]. Materials Characterization, 2010, 61(1):49-53.

[5] Sharman A R C, Hughes J I, Ridgway K. An analysis of the residual stresses generated in Inconel 718^TMwhen turning[J]. Journal of Materials Processing Technology, 2006, 173(3): 359-367.

[6] Arunachalam R M, Mannan M A, Spowage A C. Resid-ual stress and surface roughness when facing age hardened Inconel 718 with CBN and ceramic cutting tools[J]. International Journal of Machine Tools and Manufacture, 2004, 44(9): 879-887.

[7] Thakur D G, Ramamoorthy B, Vijayaraghavan L. Study on the machinability characteristics of superalloy Inconel 718 during high speed turning[J]. Materials and Design, 2009, 30(5): 1718-1725.

[8] Yu H F. The mechanism grinding burn of nickel base superalloy[J]. Journal of Changzhou Industrial Technology College: Natural Science Edition, 1996, 9(2):55-57. (in Chinese) 于洪方. 镍基高温合金磨削烧伤机理[J]. 常州工业技术学院学报: 自然科学版, 1996, 9(2): 55-57.

[9] Devillez A, Le Coz S, Dominiak S, et al. Dry machining of Inconel 718, workpiece surface integrity[J]. Journal of Materials Processing Technology, 2011, 21(10): 1590-1598.

[10] Du S G, Wang Z B, Lv C, et al. Study on high-speed milling surface microstructure of superalloys[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(6): 1156-1163. (in Chinese) 杜随更, 汪志斌, 吕超, 等. 高温合金高速铣削表面形貌及组织研究[J]. 航空学报, 2011, 32(6): 1156-1163.

[11] sterle W, Li P X. Mechanical and thermal response of a nickel-base superalloy upon grinding with high removal rates[J]. Materials Science and Engineering, 1997, 238(12): 357-366.

[12] Chen M, Li X T, Sun F H, et al. Studies on the grinding characteristics of directionally solidified nickel-based superalloy[J]. Journal of Materials Processing Technology, 2001, 116(2-3): 165-169.

[13] Ren J X, Kang R K, Shi X K, et al. Grinding of difficult-to-cut materials[M]. Beijing: National Defence Industry Press, 1999: 251-252. (in Chinese) 任敬心, 康仁科, 史兴宽, 等. 难加工材料的磨削[M].北京:国防工业出版社, 1999: 251-252.

[14] Xu P. High speed grinding of Nickel superalloy using CBN wheels. Nanjing: College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 2010. (in Chinese) 徐鹏. CBN 砂轮高速磨削镍基高温合金. 南京:南京航空航天大学机电学院, 2010.

[15] Coelho R T, Silva L R, Braghini A, et al. Some effects of cutting edge preparation and geometric modifications when turning INCONEL 718^TM at high cutting speeds[J]. Journal of Materials Processing Technology, 2004, 148(1):147-153.

[16] Sharmana A R C, Hughesa J I, Ridgwaya K. Workpiece surface integrity and tool life issues when turning Inconel 718^TM nickel based superalloy[J]. Machining Science and Technology, 2004, 8(3): 399-414.

[17] Guo J T. Materials science and engineering superalloy (Volume 1)[M]. Beijing: Science Press, 2008: 292. (in Chinese) 郭建亭. 高温合金材料学(上册)[M]. 北京: 科学出版社, 2008: 292.

[18] China Aeronautical Materials Handbook Editorial Board. China aeronautical materials handbook (Volume 2)[M]. 2nd ed. Beijing: China Standard Publishing House, 2001: 328. (in Chinese) 中国航空材料手册编辑委员会. 中国航空材料手册(第二卷)[M]. 2版. 北京: 中国标准出版社, 2001: 328.

Softening Mechanism of Grinding Surface Metamorphic Layer of GH4169DA

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	XIAO Guijian, LIU Shuai, HE Yi, LIU Gang, ZHU Shengwang, SONG Shayu. Defocus control and surface topography of titanium alloy laser belt processing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525603-525603.
[2]	YAN Yanyan, ZHANG Yafei, ZHANG Zhaoqing. Surface and subsurface damage mechanisms in tangential ultrasonic-assisted grinding of ZrO₂ ceramics [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(7): 624749-624749.
[3]	LI Qian, ZHANG Fulu, ZHAO Zihua. Very high cycle fatigue of nickel-based single-crystal and directionally solidified superalloys: Review [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524340-524340.
[4]	ZHU Dahu, XU Xiaohu, JIANG Cheng, LI Wenlong. Research progress in robotic grinding technology for complex blades [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524265-524265.
[5]	ZHAO Huan, JIANG Zongmin, DING Han. Tool path planning for profiling grinding of aero-engine blade edge [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524318-524318.
[6]	XIAO Guijian, HE Yi, HUANG Yun, LI Wei, LI Quan. Single particle removal model and experimental study on micro bionic zigzag surface of aeronautical blade using belt grinding [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(7): 623288-623288.
[7]	KONG Haohao, YANG Shufeng, QU Jinglong, DU Jinhui, HUANG Yancheng. Type and distribution of inclusion in GH4169 nickel based superalloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(4): 423306-423306.
[8]	DING Wenfeng, XI Xinxin, ZHAN Jinghua, XU Jiuhua, FU Yucan, SU Honghua. Research status and future development of grinding technology of titanium materials for aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 22763-022763.
[9]	HUANG Yun, XIAO Guijian, ZOU Lai. Current situation and development trend of robot precise belt grinding for aero-engine blade [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(3): 22508-022508.
[10]	HUANG Yun, XIAO Guijian, ZOU Lai. Current situation and development trend of polishing technology for blisk [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(7): 2045-2064.
[11]	XIAO Guijian, HUANG Yun, YI Hao. Experimental research of new belt grinding method for consistency of blisk profile and surface precision [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(5): 1666-1676.
[12]	XU Jun, LU Wenzhuang, WANG Han, ZHU Yansong, HUANG Qunchao, ZUO Dunwen. Characteristics and Wear Properties of Grinding Surface of Titanium Alloy TC4-DT [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(2): 567-573.
[13]	XU Jiuhua, ZHANG Zhiwei, FU Yucan. Review and Prospect on High Efficiency Profile Grinding of Nickel-based Superalloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(2): 351-360.
[14]	ZHANG Xianglei, YAO Bin, FENG Wei, SHEN Zhihuang. Modeling of Virtual Grinding Wheel Based on Random Distribution of Multi Abrasive Grains and Prediction of Grinding Force [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(12): 3489-3498.
[15]	HE Qingshan, FU Yucan, XU Hongjun, MA Ke, CHEN Chen. Development of Annular Heat Pipe Grinding Wheel for High Efficiency Machining of TC4 Titanium Alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(7): 1740-1747.