数控系统中空间任意平面圆弧插补算法

Abstract

Abstract: According to the piinciple of rotaion of coordinate system, an interpolation algorithm with which the circular ares in an arbitrary plane can be implemented in real time is presented in the paper. With this algorithm CNC can make all kinds of circular arcs and its performance is improved. The main requirements of an interpolation subroutine are couputing accuray and rapidity, that is. the computing time must be shorter than the sampling period of the system, and a period of time is left to do data procession and to collect the information on running and state of the machine tool. The interpolation algorithm is tested by using C laguage. A computer whose CPU is intel 8088 is used with afrequency of s megahertz and its duration of time to finish one interpolation compuiting is about 5-6 ms which is acceptable for actual CNC. Therefore this interpolatin algorithm is feasible.

Key words: CNC, 5 axis, interpolation

Dou Xiao-mu;Peng Yan-wu. THE INTERPOLATION ALGORITHM OF CIRCULAR-ARCS IN AN ARBITRARY PLANE FOR CNC[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1992, 13(11): 694-697.

[1]	WANG Fei, HAN Xiangyu. Short-term prediction of air traffic flow based on fractal interpolation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 325585-325585.
[2]	LIU Zhan, ZHANG Jun, YIN Jia, ZHAO Wanhua. On-machine detection of geometric and state parameters of end mills based on machine vision [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(7): 425593-425593.
[3]	YAN Hao, WU Xiaoming. Topology optimization and structure evolution of turbine disks based on load sensitivity suppression [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225295-225295.
[4]	WU Baohai, ZHANG Yang, ZHENG Zhiyang, ZHANG Ying, ZHANG Siqi. Review and prospects of feedrate optimization in CNC machining [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525467-525467.
[5]	FAN Yida, MAO Yuming, SHU Zhongping, WANG Jifei, ZHANG Yangyang, YU Zhefeng. Hybrid fluid-to-solid loads transformation based on pressure-interpolation/force-equivalence for launch vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(3): 225053-225053.
[6]	XU Jinting, NIU Jinbo, CHEN Mansen, SUN Yuwen. Research progress in multi-axis CNC machining of precision complex curved parts [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524867-524867.
[7]	SHI Xunlei, ZHANG Jiwen, LIU Shuntao, CHEN Ken. Correction strategy for hole positions based on Kriging interpolation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(9): 423499-423499.
[8]	ZHANG Rouhe, FAN Yazhuo, SHE Zhiyong, CUI Naigang. TSTO vehicle first-stage return trajectory: Optimization and onboard generation [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 623856-623856.
[9]	SHI Zhanghu, HE Xiaoxu, ZENG Debiao, LEI Pei. Error compensation method for mobile robot positioning based on error similarity [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(11): 424105-424105.
[10]	XIONG Qingchun, WANG Jiaxu, ZHOU Qinghua. Prediction model of machining errors based on precision and process parameters of machine tools [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(8): 421713-421713.
[11]	CUI Pengcheng, TANG Jing, LI Bin, MA Mingsheng, DENG Youqi. A conservative interpolation method for overset mesh via super mesh [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(3): 121569-121569.
[12]	GUO Zhongzhou, HE Zhiqiang, ZHAO Wenwen, CHEN Weifang. Efficient mesh deformation and flowfield interpolation method for unstructured mesh [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(12): 122411-122411.
[13]	HE Huan, SONG Dapeng, ZHANG Chenkai, CHEN Guoping. Finite element model of beem considering arbitrary deformation mode of cross-section [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2018, 39(12): 222228-222228.
[14]	LI Zhi, MA Dongli, YANG Muqing, GUO Yang, HU Haode. Piecewise interpolation method for calculating sea-UAV's takeoff performance [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017, 38(12): 121369-121369.
[15]	GAO Xin, LI Yingguang, LIU Changqing, ZHANG Chen. An adjusting method of tool path on machine for NC manufacture of large thin-walled aeronautical part based on integration of CAM and CNC [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(12): 3980-3990.

THE INTERPOLATION ALGORITHM OF CIRCULAR-ARCS IN AN ARBITRARY PLANE FOR CNC

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments