CFRP反射器型面主动控制和作动器位置优化

doi:10.7527/S1000-6893.2018.22751

Abstract

Abstract: In this paper, the piezoelectric ceramic transducer actuators are used to perform active shape control for Carbon Fiber Reinforced Polymer (CFRP) rib reflector. Firstly, a beam element with independent degrees of voltage and a plate element with higher transverse shear deformation are used to conduct a finite element modeling of the CFRP reflector. Using Hamilton variation formulation, the governing equation of the finite element model is derived, developing an optimized reflector surface shape controller that minimizes the Root Mean Square (RMS) error. Then, the placement optimization of PZT actuators is investigated under several typical loads. To minimizing the residual RMS error of the reflector, an optimization method combining the adaptive genetic algorithm with the gradient projection method is proposed to solve the placement optimization of the actuators with a certain number. Numerical examples show the validity and the effectiveness of the proposed method. Finally, an experimental prototype is made to verify the proposed controlling method. The results proved the feasibility and the effectiveness of the proposed method.

Key words: active control, PZT actuator, actuator placement, genetic algorithm, CFRP

CLC Number:

V19
TP13

WU Ke, ZHANG Huazhen, LAN Lan, ZHOU Yang. Shape active control of a CFRP reflector and placement optimization of actuator[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(7): 222751-222751.

References

[1] PEARSON J, MOORE J, FANG H. Large and high precision inflatable membrane reflector:AIAA-2010-2500[R]. Reston, VA:AIAA, 2010.
[2] LANG M, BAIER H, ERNST T. High precision thin shell reflectors-design concepts, structural optimization and shape adjustment techniques[C]//Proceedings of the European Conference on Spacecraft Structures, Materials and Mechanical Testing, 2005:1-10.
[3] SHI H, YUAN S, YANG B. New methodology of surface mesh geometry design for deployable mesh reflectors[J]. Journal of Spacecraft & Rockets, 2018, 55(2):266-281.
[4] YUAN S, YANG B, FANG H. Improvement of surface accuracy for large deployable mesh reflectors:AIAA-2016-5571[R]. Reston, VA:AIAA, 2016.
[5] SOYKASAP Ö, TAN L T. High-precision offset stiffened spring-back composite reflectors[J]. AIAA Journal, 2011, 49(10):2144-2151.
[6] TABATA M, NATORI M C. Active shape control of a deployable space antenna reflector[J]. Journal of Intelligent Material Systems & Structures, 1996, 7(2):235-240.
[7] FANG H, QUIJQANO U, WANG K W, et al. High-precision adaptive control of large reflector surface[R]. Washington, D.C.:NASA, 2008.
[8] WANG Z, LI T, DENG H. Form-finding analysis and active shape adjustment of cable net reflectors with PZT actuators[J]. Journal of Aerospace Engineering, 2012, 27(3):575-586.
[9] STEIN G, GORINEVSKY D. Design of surface shape control for large two-dimensional arrays[J]. IEEE Transactions on Control Systems Technology, 2005, 13(3):422-433.
[10] ANDOH F, WASHINGTON G, YOON H S, et al. Efficient shape control of distributed reflectors with discrete piezoelectric actuators[J]. Journal of Intelligent Material Systems & Structures, 2004, 15(1):3-15.
[11] LU Y F, YUE H H, DENG Z Q, et al. Research on active control for thermal deformation of precise membrane reflector with boundary SMA actuators[C]//ASME 2014 International Mechanical Engineering Congress and Exposition. New York:ASME, 2014:1-9.
[12] DESMIDT H A, WANG K W, FANG H. Optimized gore/seam cable actuated shape control of gossamer membrane reflectors[J]. Journal of Spacecraft & Rockets, 2007, 44(5):1122-1130.
[13] WU K, FANG H, LAN L, et al. Shape control of a CFRC reflector with PZT and MFC actuators:AIAA-2018-1197[R]. Reston, VA:AIAA, 2018.
[14] 宋祥帅, 王恩美, 穆瑞楠, 等. 格栅反射器型面的主动控制[J]. 航空学报, 2018, 39(6):221541. SONG X S, WANG E M, MU R N, et al. Active shape control of a reflector with PZT actuators assembled on ribs[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(6):221541(in Chinese).
[15] SULEMAN A, GONCALVES M. Multi-objective optimization of an adaptive composite plate using the physical programming approach[J]. Journal of Intelligent Material Systems & Structures, 1999, 10(1):56-70.
[16] ADALI S, JR J C B, SADEK I S, et al. Robust shape control of reams with load uncertainties by optimally placed piezo actuators[J]. Structural & Multidisciplinary Optimization, 2000, 19(4):274-281.
[17] ALDRAIHEM J, SINGH T, WETHERHOLD R C. Optimal size and location of piezoelectric actuator/sensors:Practical considerations[J]. Journal of Guidance, Control, and Dynamics, 2000, 23(3):509-515.
[18] BARBONI R, MANNINI A, FANTINI E, et al. Optimal placement of PZT actuators for the control of beam dynamics[J]. Smart Materials & Structures, 2000, 9(1):110-120.
[19] BRUANT I, COFFIGNAL G, LENE F, et al. A methodology for determination of piezoelectric actuator and sensor location on beam structures[J]. Journal of Sound & Vibration, 2001, 243(5):861-882.
[20] DONG Y, HUANG H. Truss topology optimization by using multi-point approximation and GA[J]. Chinese Journal of Computational Mechanics, 2004, 21(6):746-751.
[21] AN H, XIAN K, HUANG H. Actuator placement optimization for adaptive trusses using a two-level multipoint approximation method[J]. Structural & Multidisciplinary Optimization, 2016, 53(1):29-48.
[22] LIU S, LIN Z. Integrated design optimization of voltage channel distribution and control voltages for tracking the dynamic shapes of smart plates[J]. Smart Materials & Structures, 2010, 19(12):125013.
[23] REDDY J N. On laminated composite plates with integrated sensors and actuators[J]. Engineering Structures, 1999, 21(7):568-593.
[24] CHOPRA I, SIROHI J. Smart structures theory[M]. Cambridge:Cambridge University Press, 2013.
[25] BATHE K J. Finite element method[M]. New York:Wiley, 2008.
[26] MICHALEWICZ Z. Genetic algorithms, numerical optimization, and constraints[C]//Proceedings of the 6th International Conference on Genetic Algorithms,1995:1-8.
[27] DAI G M, MAHAJAN V N. Non-recursive determination of orthonormal polynomials with matrix formulation[J]. Optics Letters, 2007, 32(1):74-76.

Shape active control of a CFRP reflector and placement optimization of actuator

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Wei ZHANG, Binwen WANG, Junling FAN, Shaozheng ZHAN, Ting JIAO, Yu YANG. Ultrasonic nondestructive characterization of impact damage and compression after impact for CFRP based on multi-mode imaging [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(1): 426635-426635.
[2]	HAN Kai, DONG Richang, SHAO Fengwei, GONG Wenbin, CHANG Jiachao. Dynamic topology optimization of navigation satellite inter-satellite links network based on improved genetic algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(9): 326095-326095.
[3]	ZHOU Yitao, YANG Yang, WU Zhigang, YANG Chao. Flight test for gust alleviation on a high aspect ratio UAV platform [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(6): 526126-526126.
[4]	HU Jiaxin, RUI Shu, GAO Ruichao, GOU Jianjun, GONG Chunlin. Hybrid optimization method for structural layout and size of flight vehicles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(5): 225363-225363.
[5]	ZHANG Yinuo, QIAO Hongchao, CAO Zhihe, LIANG Jinsheng, ZHAO Jibin. Microstructure characteristics of CFRP deep groove processed by water jet-guided laser processing technology [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525144-525144.
[6]	YANG Chao, QIU Qisheng, ZHOU Yitao, WU Zhigang. Review of aircraft gust alleviation technology [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(10): 527350-527350.
[7]	DUAN Yanhui, ZHOU Xin, GAO Shijiexi, LIN Jinxing, ZHANG Huaibao, WANG Guangxue. Two-step optimal strategy for load balancing of structured grid [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 625751-625751.
[8]	YANG Zhengwei, ZHAO Zhibin, LI Yin, SONG Yuanjia, KOU Guangjie, LI Lei, CHENG Pengfei. Infrared radiation characteristics of CFRP laminate surface under compressive fatigue load [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524239-524239.
[9]	WANG Andong, BIAN Guixue, ZHANG Yong, CHEN Yueliang, ZHANG Zhuzhu, ZHANG Yangguang. Aging mechanism of G814/3233 composite in marine environment and correlation between accelerated aging and natural aging [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(5): 524260-524260.
[10]	ZHONG Yun, WAN Lujun, ZHANG Jieyong. Optimized selection method for air combat course of action with interval uncertainty [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 324282-324282.
[11]	LIU Hao, WANG Wei, JIN Wei, NIU Wenchao, YANG Zhichun. Experiments of RFxLMS control for vertical tail buffeting [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(2): 224090-224090.
[12]	YANG Qi, LIU Wei, YANG Xiaoliang, LI Hao. Multidisplinary interactions numerical simulation for active control of delta wing rock [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 124685-124685.
[13]	ZOU Shiyu, LI Fuming, XIE Aiping, ZHOU Tao, LIU Peng. Resource allocation based on improved fireworks algorithm [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(12): 324716-324716.
[14]	LI Yuanxiao, JIAO Feng, ZHANG Shijie, ZHANG Shun, WANG Xue, TONG Jinglin. Experiment on high and low frequency compound vibration-assisted drilling of CFRP/titanium alloy laminated structure [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524802-524802.
[15]	QI Zhenchao, XIAO Yexin, ZHANG Ziqin, WANG Xingxing, CHEN Wenliang. Modeling and verification of thermal response in connection area of current-assisted riveting CFRP [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(10): 524535-524535.