1 |
WEINGERTNER S. Sanger-the reference concept of the German hypersonic technology program: AIAA-1993-5161[R]. Reston: AIAA,1993.
|
2 |
SZIROCZAK D, SMITH H. A review of design issues specific to hypersonic flight vehicles[J]. Progress in Aerospace Sciences, 2016, 84: 1-28.
|
3 |
FUCHS R P, CHAPUT A J, FROST D E, et al. Why and whither hypersonics research in the US Air Force: SAB-TR-00-03[R]. Washington, D. C.: US Air Force Scientific Advisory Board, 2000.
|
4 |
刘晓伟, 何国强, 刘佩进. 一种RBCC二元进气道变几何方案研究[J]. 固体火箭技术, 2010, 33(4): 409-413, 418.
|
|
LIU X W, HE G Q, LIU P J. Investigation of a RBCC 2D variable-geometry inlet scheme[J]. Journal of Solid Rocket Technology, 2010, 33(4): 409-413, 418 (in Chinese).
|
5 |
刘晓伟, 李永洲, 张蒙正, 等. RBCC进气道双流道变几何方案研究[J]. 航空动力学报, 2016, 31(11): 2659-2664.
|
|
LIU X W, LI Y Z, ZHANG M Z, et al. Investigation of variable geometry RBCC inlet with double passage[J]. Journal of Aerospace Power, 2016, 31(11): 2659-2664 (in Chinese).
|
6 |
金志光, 张堃元, 陈卫明, 等. 高超声速二元变几何进气道气动方案设计与调节规律研究[J]. 航空学报, 2013, 34(4): 779-786.
|
|
JIN Z G, ZHANG K Y, CHEN W M, et al. Design and regulation of two-dimensional variable geometry hypersonic inlets[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(4): 779-786 (in Chinese).
|
7 |
张林, 张堃元, 金志光, 等. 高超声速二元进气道顶板移动变几何方案数值模拟[J]. 航空学报, 2012, 33(10): 1800-1808.
|
|
ZHANG L, ZHANG K Y, JIN Z G, et al. Numerical simulation of a variable geometry hypersonic 2D inlet designed with compressible ramp movable[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(10): 1800-1808 (in Chinese).
|
8 |
李永洲, 刘晓伟, 张蒙正, 等. 马赫数2.5~7.0的二元变几何进气道设计[J]. 火箭推进, 2015, 41(5): 17-22.
|
|
LI Y Z, LIU X W, ZHANG M Z, et al. Design of a two dimensional variable geometry inlet with Mach number 2.5-7.0[J]. Journal of Rocket Propulsion, 2015, 41(5): 17-22 (in Chinese).
|
9 |
张正泽, 刘佩进, 秦飞, 等. RBCC进气道喉道及唇口调节数值研究[J]. 推进技术, 2018, 39(5): 1003-1013.
|
|
ZHANG Z Z, LIU P J, QIN F, et al. Numerical investigations on throat and lip adjustments of RBCC inlet[J]. Journal of Propulsion Technology, 2018, 39(5): 1003-1013 (in Chinese).
|
10 |
王翼, 徐尚成, 周芸帆, 等. 多目标考虑下高超声速进气道唇口角参数化设计与分析[J]. 航空学报, 2022, 43(8): 125698.
|
|
WANG Y, XU S C, ZHOU Y F, et al. Multi-objective design and analysis of cowl lip angle for hypersonic inlet[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(8): 125698 (in Chinese).
|
11 |
张堃元. 基于弯曲激波压缩系统的高超声速进气道反设计研究进展[J]. 航空学报, 2015, 36(1): 274-288.
|
|
ZHANG K Y. Research progress of hypersonic inlet reverse design based on curved shock compression system[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(1): 274-288 (in Chinese).
|
12 |
郑小梅, 吕浩宇, 徐大军, 等. MHD加速器模式磁控进气道的优化设计[J]. 航空学报, 2010, 31(2): 223-230.
|
|
ZHENG X M, LYU H Y, XU D J, et al. Optimization of accelerator mode MHD controlled inlet[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(2): 223-230 (in Chinese).
|
13 |
王建勇, 谢旅荣, 赵昊, 等. 一种改善高超声速进气道自起动能力的流场控制研究[J]. 航空学报, 2015, 36(5): 1401-1410.
|
|
WANG J Y, XIE L Y, ZHAO H, et al. A flow-control conception of improving self-start performance of hypersonic inlet[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(5): 1401-1410 (in Chinese).
|
14 |
SULLINS G A, WALTRUP P J. A comparison of scramjet integral analysis techniques[J]. Journal of Propulsion and Power, 1985, 1(2): 156-158.
|
15 |
朱也夫 B C, 马卡伦 B С. 冲压和火箭: 冲压发动机原理[M]. 刘兴洲,译. 北京: 国防工业出版社, 1975.
|
|
ЗУЕВ В С, МАКАРОН В С. Ramjet and rocket: Ramjet principle[M]. LIU X Z, translated. Beijing: National Defense Industry Press, 1975 (in Chinese).
|
16 |
HEISER W H, PRATT D T, DELEY D H, et al. Hypersonic airbreathing propulsion[M]. Reston:AIAA, 1994.
|
17 |
BILLIG F S, SULLINS G A. Optimization of combustor-isolator in dual-mode ram scramjets: AIAA-1993-5154[R]. Reston:AIAA, 1993.
|
18 |
HEISER W H, PRATT D T. Aerothermodynamics of the dual-mode combustion system[M]. Reston: AIAA, 2001.
|
19 |
陈军. Ma4~7双模态冲压发动机燃烧室热力工作过程与性能潜力研究[D]. 绵阳: 中国空气动力研究与发展中心, 2016.
|
|
CHEN J. The relationship between thermal process and potential performance in dual-mode scramjet at Ma4-7[D]. Mianyang: CARDC, 2016 (in Chinese).
|
20 |
SMART M K. “Scramjet inlets” in high speed propulsion: Engine design-integration and thermal management: RTO-EN-AVT-185[R]. Belgium: von Karman Institute, 2010.
|
21 |
白菡尘, 陈军. 双模态冲压发动机等效热力过程与性能关系原理[M]. 北京: 国防工业出版社, 2018.
|
|
BAI H C, CHEN J. Connection principle between dual-mode scramjet performance and equivalent thermal-dynamic process[M]. Beijing: National Defense Industry Press, 2018 (in Chinese).
|
22 |
SIEBENHAAR A, BULMAN M J, BONNAR D K. The role of the strutjet engine in new global and space markets: IAF-98-S.5.04[R]. Washington, D. C.: NASA, 1998.
|
23 |
MERLIN P. Design and development of the blackbird: Challenges and lessons learned: AIAA-2009-1522[R]. Reston: AIAA, 2009
|
24 |
GLASS D. Ceramic matrix composite (CMC) thermal protection systems (TPS) and hot structures for hypersonic vehicles: AIAA-2008-2682[R]. Reston: AIAA, 2008.
|
25 |
万冰, 白菡尘, 陈军. 可调混压进气道超额定工况黏性作用理解[J]. 推进技术, 2019, 40(9): 2012-2021.
|
|
WAN B, BAI H C, CHEN J. Understanding on viscous effect for a variable-geometry mixed-compression inlet at over-speed regime[J]. Journal of Propulsion Technology, 2019, 40(9): 2012-2021 (in Chinese).
|
26 |
朱克罗, 霍夫曼. 气体动力学[M]. 王汝涌, 吴宗真, 吴宗善, 等, 译. 北京: 国防工业出版社, 1984.
|
|
ZUCROW M J, HOFFMAN J D. Gas dynamics[M]. WANG R S, WU Z Z, WU Z S, et al, translated. Beijing: National Defense Industry Press, 1984 (in Chinese).
|
27 |
黎崎. 二元高超进气道入口段设计参数与气动喉道特征关系研究[D]. 绵阳: 中国空气动力研究与发展中心,2017.
|
|
LI Q. Effect of entrance section design parameters on aero-throat in a 2D hypersonic inlet[D]. Mianyang: CARDC,2017 (in Chinese).
|
28 |
万冰. Ma3可调进气道及火箭射流影响的流场演化[D]. 绵阳: 中国空气动力研究与发展中心, 2019.
|
|
WAN B. The flow structure evolvement in a Ma3 variable-geometry supersonic intake with the effect of rocket jet[D]. Mianyang: CARDC, 2019 (in Chinese).
|
29 |
MATTINGLY J D, HEISER W H, PRATT D T. Aircraft engine design, second edition[M]. Reston: AIAA, 2002.
|