脉动态电解加工

doi:10.7527/S1000-6893.2021.25959

观点

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

脉动态电解加工

朱荻, 刘嘉, 王登勇, 房晓龙, 刘言

南京航空航天大学机电学院, 南京 210016

收稿日期:2021-06-15 修回日期:2021-07-19 发布日期:2021-09-06
通讯作者: 朱荻 E-mail:dzhu@nuaa.edu.cn
基金资助:
国家自然科学基金（51535006）

Pulse dynamic electrochemical machining

ZHU Di, LIU Jia, WANG Dengyong, FANG Xiaolong, LIU Yan

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2021-06-15 Revised:2021-07-19 Published:2021-09-06
Supported by:
National Natural Science Foundation of China (51535006)

摘要/Abstract

摘要： 电解加工在航空航天装备的核心部件制造中起到了重要作用。为了满足这些高科技产品的发展需求，它的加工精度需要进一步提高。电解加工过程中产生的氢气、温升及去除物，会显著影响加工间隙中电解液电导率的分布，并降低加工精度。脉动态电解加工将工具振动与脉冲给电优化耦合，改变了间隙状态，提高了精度和稳定性。拷贝式、旋印式、削边电极线切割式等3种脉动态电解加工形式分别对应叶片类、机匣类、榫槽类结构的加工表现出很好的工艺效果。

关键词: 电解加工, 加工精度, 脉动态, 整体叶盘, 机匣, 榫槽

Abstract: Electrochemical Machining (ECM) plays an important role in the manufacturing of core components of aerospace equipment. To meet the development demands of these high-tech products, the machining accuracy of ECM needs to be further improved. During ECM process, hydrogen bubbles, joule heat and machining products are generated, which remarkably affects the distribution of the electrolyte conductivity in the inter-electrode gap and reduces the machining accuracy. Pulse dynamic ECM effectively change the gap state and improve the machining accuracy and stability by coupling tool vibration with pulse machining current optimally. In this paper, three kinds of pulse dynamic ECM modes containing copy-like ECM, counter-rotating ECM and wire ECM with edged electrode are proposed, which present favorable process effects on the machining of complex structures such as engine blades, casings and tenon grooves.

Key words: electrochemical machining, machining accuracy, pulse dynamic, blisk, casing, tenon groove

中图分类号:

V263

朱荻, 刘嘉, 王登勇, 房晓龙, 刘言. 脉动态电解加工[J]. 航空学报, 2022, 43(4): 525959-525959.

ZHU Di, LIU Jia, WANG Dengyong, FANG Xiaolong, LIU Yan. Pulse dynamic electrochemical machining[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022, 43(4): 525959-525959.

参考文献

[1] KLOCKE F, KLINK A, VESELOVAC D, et al. Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes[J]. CIRP Annals-Manufacturing Technology, 2014, 63(2):703-726.
[2] KLOCKE F, ZEIS M, KLINK A. Technological and economical capabilities of manufacturing titanium- and nickel-based alloys via electrochemical machining (ECM)[J]. Key Engineering Materials, 2012, 504-506:1237-1242.
[3] KLOCKE F, ZEIS M, HARST S, et al. Modeling and simulation of the electrochemical machining (ECM) material removal process for the manufacture of aero engine components[J]. Procedia CIRP, 2013, 8:265-270.
[4] 范植坚, 王天诚, 冯延军, 等. 火炮身管大缠角混合膛线计算机数字控制电解加工技术研究[J]. 兵工学报, 2005, 26(5):651-655. FAN Z J, WANG T C, FENG Y J, et al. CNC-ECM of the mixed rifle with a large spiral angle in cannon[J]. Acta Armamentarii, 2005, 26(5):651-655(in Chinese).
[5] XU Z Y, WANG Y D. Electrochemical machining of complex components of aero-engines:Developments, trends, and technological advances[J]. Chinese Journal of Aeronautics, 2021, 34(2):28-53.
[6] 盛文娟, 徐斌. 航空发动机机匣电解加工工艺试验[J]. 电加工与模具, 2010(2):52-55, 59. SHENG W J, XU B. Technological test of electrolytic machining of aero-engine casing[J]. Electromachining & Mould, 2010(2):52-55, 59(in Chinese).
[7] 黄维, 黄春峰, 王永明, 等. 先进航空发动机关键制造技术研究[J]. 国防制造技术, 2009(3):42-48. HUANG W, HUANG C F, WANG Y M, et al. Key manufacturing technology research of advanced aero-engine[J]. Defense Manufacturing Technology, 2009(3):42-48(in Chinese).
[8] BUBMANN M, KRAUS J, BAYER E. An integrated cost-effective approach to blisk manufacturing[C]//Proceedings of 17th Symposium on Air Breathing Engines. 2005:1-9.
[9] KENNEY J A, HWANG G S, SHIN W. Two-dimensional computational model for electrochemical micromachining with ultrashort voltage pulses[J]. Applied Physics Letters, 2004, 84(19):3774-3776.
[10] PACZKOWSKI T, ZDROJEWSKI J. Monitoring and control of the electrochemical machining process under the conditions of a vibrating tool electrode[J]. Journal of Materials Processing Technology, 2017, 244:204-214.
[11] BOGOVEEV N A, FIRSOV A G, FILATOV E I, et al. Computer support for "all-round" ECM processing of blades[J]. Journal of Materials Processing Technology, 2001, 109(3):324-326.
[12] FUJISAWA T, INABA K, YAMAMOTO M, et al. Multiphysics simulation of electrochemical machining process for three-dimensional compressor blade[J]. Journal of Fluids Engineering, 2008, 130(8):081602.
[13] ZHU D,WANG K, YANG J M. Design of electrode profile in electrochemical manufacturing process[J]. CIRP Annals, 2003, 52(1):169-172.
[14] RAJURKAR K P, SUNDARAM M M, MALSHE A P. Review of electrochemical and electrodischarge machining[J]. Procedia CIRP, 2013, 6:13-26.
[15] SMETS N, NELISSEN G, DECONINCK J, et al. Calculation of temperature fields with DC and pulsed ECM[C]//International Conference on Simulation of Electrochemical Processes. 2005:77-86.
[16] BRUSILOVSKI Z. Adjustment and readjustment of electrochemical machines and control of the process parameters in machining shaped surfaces[J]. Journal of Materials Processing Technology, 2008, 196(1-3):311-320.
[17] KOZAK J. Thermal models of pulse electrochemical machining[J]. Bulletin of the Polish Academy of Sciences, 2004, 52(4):313-320.
[18] SCHUSTER R, KIRCHNER V, ALLONGUE P, et al. Electrochemical micromachining[J]. Science, 2000, 289(5476):98-101.
[19] EBEID S J, HEWIDY M S, EI-TAWEEL T A, et al. Towards higher accuracy for ECM hybridized with low-frequency vibrations using the response surface methodology[J]. Journal of Materials Processing Technology, 2004, 149(1-3):432-438.
[20] HEWIDY M S, EBEID S J, EI-TAWEEL T A, et al. Modelling the performance of ECM assisted by low frequency vibrations[J]. Journal of Materials Processing Technology, 2007, 189(1-3):466-472.
[21] BHATTACHARYYA B, MALAPATI M, MUNDA J, et al. Influence of tool vibration on machining performance in electrochemical micro-machining of copper[J]. International Journal of Machine Tools and Manufacture, 2007, 47(2):335-342.
[22] 李小海, 王振龙, 赵万生. 高频窄脉冲电流微细电解加工[J]. 机械工程学报, 2006, 42(1):162-167. LI X H, WANG Z L, ZHAO W S. Electrolytic micromachining with high frequency short pulse current[J]. Chinese Journal of Mechanical Engineering, 2006, 42(1):162-167(in Chinese).
[23] JIANG X C, LIU J, ZHU D, et al. Research on stagger coupling mode of pulse duration and tool vibration in electrochemical machining[J]. Applied Sciences, 2018, 8(8):1296.
[24] CAO W J, WANG D Y, ZHU D. Modeling and experimental validation of interelectrode gap in counter-rotating electrochemical machining[J]. International Journal of Mechanical Sciences, 2020, 187:105920.
[25] WANG D Y, ZHU Z W, WANG N F, et al. Investigation of the electrochemical dissolution behavior of Inconel 718 and 304 stainless steel at low current density in NaNO₃ solution[J]. Electrochimica Acta, 2015, 156:301-307.
[26] ZOU X H, FANG X L, ZENG Y B, et al. A high efficiency approach for wire electrochemical micromachining using cutting edge tools[J]. The International Journal of Advanced Manufacturing Technology, 2017, 91(9-12):3943-3952.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

脉动态电解加工

Pulse dynamic electrochemical machining

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王国乾, 李寒松, 韩国峰, 李若琪, 张彦. 基于周期性换向冲液的掩膜电解加工技术[J]. 航空学报, 2022, 43(4): 525575-525575.
[2]	赵静波, 徐正扬, 刘强. 扩压器扭曲型面电解加工阴极进给方向优化及试验[J]. 航空学报, 2022, 43(4): 525570-525570.
[3]	杨涛, 曾永彬, 杭雨森, 房晓龙. 榫槽结构浸没式管电极内喷液电解切割加工[J]. 航空学报, 2022, 43(4): 525588-525588.
[4]	马世赫, 李志超, 刘桂贤, 张永俊, 王瑞祥. 脉冲气体辅助掩模电解加工技术[J]. 航空学报, 2022, 43(4): 525646-525646.
[5]	张聚臣, 李世成, 刘洋, 李兴林. 基于Realizable k-ε模型的叶盘通道电解加工多场耦合分析[J]. 航空学报, 2022, 43(4): 525670-525670.
[6]	靳玉林, 刘治汶, 陈予恕. 航空发动机双转子系统叶片-机匣碰摩故障模拟[J]. 航空学报, 2022, 43(12): 425072-425072.
[7]	赵乐, 王维, 张乐福, 王伟超, 卢金玲, 楚武利. 变转速下跨声速压气机的耦合扩稳方法[J]. 航空学报, 2022, 43(1): 124942-124942.
[8]	曹振忠, 张帆, 章定国, 余毅. 带有安装边螺栓连接结构的机匣包容能力研究[J]. 航空学报, 2021, 42(9): 224563-224563.
[9]	王志伟, 蔺小军, 史耀耀, 高源, 张允. 基于压缩量偏差约束的整体叶盘砂布轮数控抛光路径规划[J]. 航空学报, 2020, 41(2): 623330-623330.
[10]	高航, 袁业民, 陈建锋, 王宣平. 航空发动机整体叶盘磨料水射流开坯加工技术研究进展[J]. 航空学报, 2020, 41(2): 623319-623319.
[11]	马英群, 徐蒙, 张锴, 赵巍, 赵庆军. 基于结构声强法的机匣振动能量传递特性[J]. 航空学报, 2019, 40(9): 222938-222938.
[12]	陈密, 房晓龙, 朱荻. 脉冲电流大厚度电解线切割加工试验[J]. 航空学报, 2019, 40(8): 422781-422781.
[13]	张皓光, 谭锋, 安康, 楚武利, 吴艳辉. 缝式机匣处理及其轴向偏转角对跨声速轴流压气机稳定性的改善[J]. 航空学报, 2018, 39(8): 122101-122101.
[14]	王晶, 罗明, 吴宝海, 张定华. 航空发动机机匣摆线粗加工轨迹规划方法[J]. 航空学报, 2018, 39(6): 421814-421814.
[15]	向宏辉, 葛宁, 高杰, 唐凯, 杨荣菲. 周向非均匀叶尖间隙对轴流压气机性能的影响[J]. 航空学报, 2018, 39(2): 121491-121491.