伴随压力分布反设计方法在大型客机气动优化中的初步探索

doi:10.7527/S1000-6893.2019.23372

飞行器气动外形数值优化与设计专栏

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

伴随压力分布反设计方法在大型客机气动优化中的初步探索

刘峰博¹, 蒋城¹, 马涂亮², 梁益华¹

1. 中国航空工业西安航空计算技术研究所, 西安 710065;
2. 中国商飞上海飞机设计研究院, 上海 201210

收稿日期:2019-08-12 修回日期:2019-09-02 出版日期:2020-05-15 发布日期:2019-09-30
通讯作者: 刘峰博 E-mail:lfbo0115@163.com

Aerodynamic optimization design of large civil aircraft using pressure distribution inverse design method based on discrete adjoint

LIU Fengbo¹, JIANG Cheng¹, MA Tuliang², LIANG Yihua¹

1. AVIC Aeronautics Computing Technique Research Institute, Xi'an 710065, China;
2. COMAC Shanghai Aircraft Design and Research Institute, Shanghai 201210, China

Received:2019-08-12 Revised:2019-09-02 Online:2020-05-15 Published:2019-09-30

摘要/Abstract

摘要： 从工程应用角度出发，对离散伴随压力分布反设计优化方法在宽体客机机翼设计中的应用进行了研究。提出了三维构型伴随压力分布反设计与伴随优化相结合的优化设计思路，促进了离散伴随气动优化设计方法的工程化。首先，针对CRM机翼构型进行了三维压力分布反设计，验证了离散伴随压力分布反设计在三维问题中的准确性和高效性。其次，应用提出的新的优化设计思路，在某宽体全机构型两点气动优化结果的基础上，引入压力分布反设计约束方法，改进了机翼压力分布和低马赫数的阻力蠕增特性，并取得了不错的减阻及阻力发散特性提升效果，提升了优化构型的工程适用性。

关键词: 气动优化设计, 离散伴随方法, 多设计点优化, 反设计, 超临界机翼

Abstract: From the engineering application point of view, the application of the discrete adjoint companion pressure distribution inverse design optimization method in the design of wide-body civil aircraft wing is studied. The optimization design idea of three-dimensional configuration combined with pressure distribution inverse design and adjoint optimization is proposed, which promotes the engineering of discrete adjoint aerodynamic optimization design method. Firstly, the three-dimensional pressure distribution inverse design is carried out for the CRM wing configuration, which verifies the accuracy and efficiency of the discrete adjoint pressure distribution inverse design in the three-dimensional problem. Secondly, based on the new optimization design idea proposed by the application, the pressure distribution inverse design constraint method is introduced on the basis of a wide-body full-body two-point aerodynamic optimization result, and the wing pressure distribution and the resistance creep increase characteristic of the low Mach number are improved. And achieved good drag reduction and resistance divergence characteristics to improve the engineering applicability of the optimized configuration.

Key words: aerodynamic optimization design, discrete adjoint method, multipoint optimization, inverse design, supercritical wing

中图分类号:

V211.3

刘峰博, 蒋城, 马涂亮, 梁益华. 伴随压力分布反设计方法在大型客机气动优化中的初步探索[J]. 航空学报, 2020, 41(5): 623372-623372.

LIU Fengbo, JIANG Cheng, MA Tuliang, LIANG Yihua. Aerodynamic optimization design of large civil aircraft using pressure distribution inverse design method based on discrete adjoint[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(5): 623372-623372.

参考文献 30

[1]	JAMESON A, VASSBERG J C. Select ADODG case studies in aerodynamic design optimization[C]//53rd AIAA Aerospace Sciences Meeting. Reston:AIAA, 2015.
[2]	KOO D, ZINGG D W. Progress in aerodynamic shape optimization based on the Reynolds-Averaged Navier-Stokes equations[C]//54th AIAA Aerospace Sciences Meeting. Reston:AIAA, 2016.
[3]	LEE C, KOO D, TELIDETZKI K, et al. Aerodynamic shape optimization of benchmark problems using jetstream[C]//53rd AIAA Aerospace Sciences Meeting. Reston:AIAA, 2015.
[4]	LYU Z, KENWAY G K W, MARTINS J R R A. Aerodynamic shape optimization investigations of the common research model wing benchmark[J]. AIAA Journal, 2015, 53(4):968-985.
[5]	KENWAY G K W, MARTINS J R R A. Multipoint aerodynamic shape optimization investigations of the common research model wing[J]. AIAA Journal, 2016, 54(1):113-128.
[6]	MARTINS J R R A. Chapter 19:multidisciplinary design optimization of aerospace systems. In:Advances and trends in optimization with engineering applications[M]. Philadelphia:Society for Industrial and Applied Mathematics, 2017:249-257.
[7]	杨旭东, 乔志德, 朱兵. 基于控制理论和NS方程的气动设计方法研究[J]. 空气动力学学报, 2005, 23(1):46-52. YANG X D, QIAO Z D, ZHU B. Aerodynamic design method based on control theory and NS equations[J]. Acta Aerodynamica Sinica, 2005, 23(1):46-52(in Chinese).
[8]	熊俊涛, 乔志德, 杨旭东, 等. 基于粘性伴随方法的跨声速机翼气动优化设计[J]. 航空学报, 2007, 28(2):281-285. XIONG J T, QIAO Z D, YANG X D, et al. Optimum aerodynamic design of transonic wing based on viscous adjoint method[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(2):281-285(in Chinese).
[9]	左英桃, 高正红, 何俊. 基于NS方程和离散共轭方法的气动外形设计[J]. 空气动力学学报, 2010, 28(5):509-512. ZUO Y T, GAO Z H, HE J. Aerodynamic design method based on NS equations and discrete adjoint approach[J]. Acta Aerodynamica Sinica, 2010, 28(5):509-512(in Chinese).
[10]	左英桃, 傅林, 高正红. 机翼-机身-短舱-挂架外形气动优化设计方法[J]. 航空动力学报, 2013, 28(9):2009-2015. ZUO Y T, FU L, GAO Z H. Aerodynamic optimization design of wing-body-nacelle-pylon configuration[J]. Journal of Aerospace Power, 2013, 28(9):2009-2015(in Chinese).
[11]	陈颂, 白俊强, 史亚云, 等. 民用客机机翼/机身/平尾构型气动外形优化设计[J]. 航空学报, 2015, 36(10):3195-3207. CHEN S, BAI J Q, SHI Y Y, et al. Aerodynamics shape op-timization design of civil jet wing-body-tail configuration[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(10):3195-3207(in Chinese).
[12]	李立, 白俊强, 郭同彪, 等. 考虑放宽静稳定度的民用客机气动优化设计[J]. 航空学报, 2017, 38(9):203-216. LI L, BAI J Q, GUO T B, et al. Aerodynamic optimization design for civil aircraft considering relaxed static stability[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(9):203-216(in Chinese).
[13]	唐智礼, 黄明恪. 基于控制理论的Euler方程翼型减阻优化设计[J]. 空气动力学学报, 2001, 19(3):262-270. TANG Z L, HUANG M K. Control theory based airfoil design using Euler equations[J]. Acta Aerodynamica Sinica, 2001, 19(3):262-270(in Chinese).
[14]	徐兆可, 夏健, 高宜胜. 基于三维非结构网格的连续伴随优化方法[J]. 南京航空航天大学学报, 2015, 47(1):145-152. XU Z K, XIA J, GAO Y S. Continuous adjoint approach to aerodynamic optimization on 3Dunstructured grids[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2015, 47(1):145-152(in Chinese).
[15]	杨洋, 欧阳绍修, 刘学强, 等. 基于伴随算子的跨声速机翼气动优化设计[J]. 南京航空航天大学学报, 2013, 45(3):347-352. YANG Y, OUYANG S X, LIU X Q, et al. Aerodynamic optimization of transonic wing using discrete adjoint operator[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2013, 45(3):347-352(in Chinese).
[16]	李彬, 邓有奇, 唐静, 等. 基于三维非结构混合网格的离散伴随优化方法[J]. 航空学报, 2014, 35(3):674-686. LI B, DENG Y Q, TANG J, et al. Discrete adjoint optimization method for 3D unstructured grid[J]. Acta Aeronauticaet Astronautica Sinica, 2014, 35(3):674-686(in Chinese).
[17]	吴文华, 范召林, 陈德华, 等. 基于伴随算子的大飞机气动布局精细优化设计[J]. 空气动力学学报, 2013, 30(6):719-724. WU W H, FAN Z L, CHEN D H, et al. Adjoint based on high precise aerodynamic shape optimization for transonic civil aircraft[J]. Acta Aerodynamica Sinica, 2013, 30(6):719-724(in Chinese).
[18]	黄江涛, 高正红, 余婧, 等. 大型民用飞机气动外形典型综合设计方法分析[J]. 航空学报, 2019, 40(2):122369. HUANG J T, GAO Z H, YU J, et al. The analysis of a typical integrated design method for large civil aircraft aerodynamic optimization[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(2):122369(in Chinese).
[19]	黄江涛, 刘刚, 周铸, 等. 基于离散伴随方程求解梯度信息的若干问题研究[J]. 空气动力学学报, 2017, 35(4):554-562. HUANG J T, LIU G, ZHOU Z, et al. Investigation of gradient computation based on discrete adjoint method[J]. Acta Aerodynamica Sinica, 2017, 35(4):554-562(in Chinese).
[20]	TRANEN T L. A rapid computer-aided transonic airfoil de-sign method[C]//7th Fluid and Plasma Dynamics Conference, 1974.
[21]	HENNE P A. Inverse transonic wing design method[J]. Journal of Aircraft, 1981, 18(2):121-127.
[22]	乔志德. 自然层流超临界翼型的设计研究[J]. 流体力学实验与测量, 1998, 12(4):23-31. QIAO Z D. Design of supercritical airfoils with natural laminar flow[J]. Experiments and Measurements in Fluid Mechanics, 1998, 12(4):23-31(in Chinese).
[23]	朱自强, 夏志勋, 吴礼义. 跨音速翼型和机翼的反设计计算方法[J]. 航空学报, 1992, 13(10):B463-B468. ZHU Z Q, XIA Z X, WU L Y. An inverse design method of transonic airfoil and wing[J]. Acta Aeronautica et Astronautica Sinica, 1992, 13(10):B463-B468(in Chinese).
[24]	陈静, 宋文萍, 朱震, 等. 跨声速层流翼型的混合反设计/优化设计方法[J]. 航空学报, 2018, 39(12):122219. CHEN J, SONG W P, ZHU Z, et al. A hybrid inverse/direct optimization design method for transonic laminar flow airfoil[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(12):122219(in Chinese).
[25]	HAN Z H, CHEN J, ZHANG K S, et al. Aerodynamic shape optimization of natural-laminar-flow wing using surrogate-based approach[J]. AIAA Journal, 2018, 56(7):2579-2593.
[26]	李焦赞, 高正红, 詹浩. 基于目标压力分布优化的翼型反设计方法研究[J]. 弹箭与制导学报, 2008, 28(1):187-190. LI J Z, GAO Z H, ZHAN H. Study on inverse design meth-od of airfoil based on optimization of target pressure distri-bution[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2008, 28(1):187-190(in Chinese).
[27]	杨昆淼, 张卫民, 王斌. 基于机翼气动设计准则的超临界机翼气动优化研究[J]. 航空学报, 2013, 34(2):263-272. YANG K M, ZHANG W M, WANG B. Research of supercritical wing optimization based on aerodynamic design principle of wing[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(2):263-272(in Chinese).
[28]	张宇飞, 陈海昕, 符松, 等. 一种实用的运输类飞机机翼/发动机短舱一体化优化设计方法[J]. 航空学报, 2012, 33(11):1993-2001. ZHANG Y F, CHEN H X, FU S, et al. A practical optimization design method for transport aircraft wing/nacelle integration[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(11):1993-2001(in Chinese).
[29]	李润泽, 张宇飞, 陈海昕. "人在回路"思想在飞机气动优化设计中演变与发展[J]. 空气动力学学报, 2017, 35(4):529-543. LI R Z, ZHANG Y F, CHEN H X. Evolution and development of "man-in-loop" in aerodynamic optimization design[J]. Acta Aerodynamica Sinica, 2017, 35(4):529-543(in Chinese).
[30]	蒋城, 刘峰博, 李典, 等. 面向阻力发散的CRM机翼气动优化设计[J]. 航空计算技术, 2018, 48(5):46-49. JIANG C, LIU F B, LI D, et al. Aerodynamic optimization design of CRM wing faced on drag divergence[J]. Aeronautical Computing Technique, 2018, 48(5):46-49(in Chinese).

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

伴随压力分布反设计方法在大型客机气动优化中的初步探索

Aerodynamic optimization design of large civil aircraft using pressure distribution inverse design method based on discrete adjoint

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 30

相关文章 15

编辑推荐

Metrics

本文评价

[1]	顾奕然, 黄江涛, 陈树生, 刘德园, 高正红. 基于逆向增广Burgers方程的声爆反演技术[J]. 航空学报, 2023, 44(2): 626258-626258）.
[2]	姜丽红, 饶寒月, 兰夏毓, 杨体浩, 耿建中, 白俊强. 混合层流机翼气动设计与综合收益影响[J]. 航空学报, 2022, 43(11): 526791-526791.
[3]	韩忠华, 许晨舟, 乔建领, 柳斐, 池江波, 孟冠宇, 张科施, 宋文萍. 基于代理模型的高效全局气动优化设计方法研究进展[J]. 航空学报, 2020, 41(5): 623344-623344.
[4]	张鑫帅, 刘俊, 罗世彬. 基于改进多目标布谷鸟搜索算法的翼型气动优化设计[J]. 航空学报, 2019, 40(6): 122550-122550.
[5]	张彦军, 段卓毅, 雷武涛, 白俊强, 徐家宽. 超临界自然层流机翼设计及基于TSP技术的边界层转捩风洞试验[J]. 航空学报, 2019, 40(4): 122429-122429.
[6]	韩忠华, 张瑜, 许晨舟, 王凯, 吴猛猛, 朱震, 宋文萍. 基于代理模型的大型民机机翼气动优化设计[J]. 航空学报, 2019, 40(1): 522398-522398.
[7]	孙祥程, 韩忠华, 柳斐, 宋科, 宋文萍. 高超声速飞行器宽速域翼型/机翼设计与分析[J]. 航空学报, 2018, 39(6): 121737-121737.
[8]	陈静, 宋文萍, 朱震, 许朕铭, 韩忠华. 跨声速层流翼型的混合反设计/优化设计方法[J]. 航空学报, 2018, 39(12): 122219-122219.
[9]	李立, 白俊强, 郭同彪, 陈颂. 考虑放宽静稳定度的民用客机气动优化设计[J]. 航空学报, 2017, 38(9): 121112-121112.
[10]	韩少强, 宋文萍, 韩忠华, 王乐. 基于梯度增强型Kriging模型的气动反设计方法[J]. 航空学报, 2017, 38(7): 120817-120817.
[11]	王科雷, 周洲, 祝小平. 耦合多螺旋桨滑流影响的低雷诺数机翼设计[J]. 航空学报, 2017, 38(6): 120813-120813.
[12]	田旭, 李杰. 一种改进的果蝇优化算法及其在气动优化设计中的应用[J]. 航空学报, 2017, 38(4): 120370-120370.
[13]	张鑫, 黄勇, 王勋年, 王万波, 唐坤, 李华星. 超临界机翼介质阻挡放电等离子体流动控制[J]. 航空学报, 2016, 37(6): 1733-1742.
[14]	张淼, 刘铁军, 马涂亮, 陈迎春, 程攀, 周峰. 基于CFD方法的大型客机高速气动设计[J]. 航空学报, 2016, 37(1): 244-254.
[15]	王迅, 蔡晋生, 屈崑, 刘传振. 基于改进CST参数化方法和转捩模型的翼型优化设计[J]. 航空学报, 2015, 36(2): 449-461.