航空学报 > 2013, Vol. 34 Issue (6): 1463-1473   doi: 10.7527/S1000-6893.2013.0243

TC4钛合金锥形环热辗轧应变及温度场对轧辊尺寸的响应规律

郭良刚1, 陈建华1, 杨合1, 谷瑞杰2   

  1. 1. 西北工业大学凝固技术国家重点实验室, 陕西 西安 710072;
    2. 中国重型机械研究院有限公司, 陕西 西安 710032
  • 收稿日期:2012-06-25 修回日期:2012-08-25 出版日期:2013-06-25 发布日期:2012-09-18
  • 通讯作者: 杨合, Tel.: 029-88495632 E-mail: yanghe@nwpu.edu.cn; glgglg66@nwpu.edu.cn E-mail:yanghe@nwpu.edu.cn; glgglg66@nwpu.edu.cn
  • 作者简介:郭良刚 男, 博士, 副教授, 硕士生导师。主要研究方向: 精确塑性成形与计算机建模仿真。 Tel: 029-88460212-807 E-mail: glgglg66@nwpu.edu.cn;陈建华 男, 硕士研究生。主要研究方向: 钛合金环件精确轧制过程的数值模拟。 E-mail: chen.jianhua1987@163.com;杨合 男, 博士, 国家杰出青年科学基金获得者, 长江学者特聘教授, 博士生导师。主要研究方向: 精确塑性成形与计算机建模仿真。 Tel: 029-88495632 E-mail: yanghe@nwpu.edu.cn
  • 基金资助:

    国家自然科学基金(51175427);国家自然科学重点基金(51135007);金属挤压与锻造装备技术国家重点实验室(中国重型机械研究院有限公司)开放基金(2011MEFETKF_03);"高档数控机床与基础制造装备"国家科技重大专项(2010ZX04004-131-07)

Response Rules of Strain and Temperature Fields to Roll Sizes During Hot Rolling Process of TC4 Titanium Alloy Conical Ring

GUO Lianggang1, CHEN Jianhua1, YANG He1, GU Ruijie2   

  1. 1. National Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an 710072, China;
    2. China National Heavy Machinery Research Institute Co., Ltd, Xi'an 710032, China
  • Received:2012-06-25 Revised:2012-08-25 Online:2013-06-25 Published:2012-09-18
  • Contact: 10.7527/S1000-6893.2013.0243 E-mail:yanghe@nwpu.edu.cn; glgglg66@nwpu.edu.cn
  • Supported by:

    National Natural Science Foundation of China (51175427);National Natural Science Foundation for Key Program of China (51135007);Fund of the State Key Laboratory of Metal Extrusion and Forging Equipment Technology (China National Heavy Machinery Research Institute Co., Ltd) (2011MEFETKF_03);"National High-end Numerical Control Machine and Basic Manufacture Equipment" National Science and Technology Major Project (2010ZX04004-131-07)

摘要:

提出采用等效半径来描述锥形轧辊(驱动辊和芯辊)及锥形环坯的呈线性变化的径向尺寸,进而建立了确定锥形环件辗轧关键工艺参数合理范围的方法。基于ABAQUS软件平台,研究建立了TC4钛合金锥形环热辗轧三维热力耦合有限元模型,进而模拟阐明了TC4钛合金锥形环热辗轧过程应变及温度场对轧辊尺寸(等效半径)的响应规律与机理。主要结果表明:随着驱动辊等效半径增大,环件内侧等效塑性应变及温度明显增大,环件温度分布越均匀;随着芯辊等效半径增大,环件内侧等效塑性应变及温度明显减小,温度分布越不均匀;驱动辊和芯辊各存在一个最佳的等效半径,使得环件应变分布最均匀。

关键词: 钛合金, 锥形环, 环件轧制, 轧辊尺寸, 等效半径, 热力耦合

Abstract:

A parameter of equivalent radius is proposed to describe the linearly changing radial sizes of the conical rolls and conical ring blank. Then a method to determine the reasonable range of the key process parameters for conical ring rolling is presented. Under the ABAQUS software environment, a coupled thermo-mechanical 3D-FE model is developed for hot conical ring rolling of TC4 titanium alloy, and the response rules and mechanism of strain and temperature fields to roll sizes are numerically revealed during the process. The main results show that: with the increase of the equivalent radius of the main roll, the equivalent plastic strain and temperature increases obviously in the inside surface layer of the ring, and the temperature distribution of the whole rolled ring becomes more homogeneous, with the increase of the equivalent radius of the mandrel, the equivalent plastic strain and temperature decrease obviously in the inside surface layer of the ring, and the temperature distribution of the whole rolled ring becomes more inhomogeneous, and for the main roll and the mandrel, there is a respective optimum equivalent radius at which the strain of the rolled ring is most evenly distributed.

Key words: titanium alloys, conical ring parts, ring rolling, roll size, equivalent radius, thermal-mechanical coupling

中图分类号: