航空学报 > 2005, Vol. 26 Issue (4): 397-401

空空导弹成像制导系统动态仿真技术研究

贾晓洪1, 梁晓庚2, 唐硕1, 周须峰1   

  1. 1. 西北工业大学 航天工程学院, 陕西 西安 710072;2. 洛阳光电技术发展中心, 河南 洛阳 471009
  • 收稿日期:2004-08-19 修回日期:2005-01-13 出版日期:2005-08-25 发布日期:2005-08-25

Research on Dynamic Simulation Technique for Infrared Imaging Air-to-Air Missile Guidance System

JIA Xiao-hong1, LIANG Xiao-geng2, TANG Shuo1, ZHOU Xu-feng1   

  1. 1. College of Astronautics, Northwestern Polytechnical University, Xi'an 710072, China;2. Luoyang Opto-Electro Technology Development Center, Luoyang 471009, China
  • Received:2004-08-19 Revised:2005-01-13 Online:2005-08-25 Published:2005-08-25

摘要: 提出了一种用于空空导弹制导系统动态仿真测试的数字成像导引回路设计与实现方法。通过设计合理的数字模拟接口并将真实的红外成像导引头用数学模型替代,可以实现数字导引头与导弹飞控舱实物的有效连接,完成灵活的制导系统数字/实物多重组合动态仿真。在保证必要的红外目标辐射特性和运动特性建模精度基础上,采用这种方法可以满足导弹制导算法的研制和调试需要。该方法目前已在某型红外数字化空空导弹的制导系统算法研制中获得应用,取得良好的应用效果。

关键词: 空空导弹, 动态仿真, 红外成像, 设计平台, 成像制导

Abstract: A design and implementation method is put forward which is applied to digital imaging guidance loop used in dynamic simulation for air-to-air missile guidance system. By reasonably-designed digital and analog interface, and replacing the true infrared imaging seeker with mathematical model, the digital seeker can be effectively connected with the true control section of missile. Thus the flexible combination of numerical real time and hardware-in-the-loop simulation for each guidance and control component can be realized in dynamic simulation for the infrared imaging air-to- air missile guidance system. Based on the necessary modeling accuracy for radiating characteristics and movement characteristics of infrared targets, it can meet the design and debug demand for the guidance algorithm of missile. This method was applied to the research on guidance algorithm of one infrared missile and gave ideal result.

Key words: air-to-air missile, dynamic simulation, infrared imaging, design platform, imaging guidance

中图分类号: