双向梯度复合材料裂纹尖端应力强度因子研究

doi:10.7527/S1000-6893.2013.0319

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

双向梯度复合材料裂纹尖端应力强度因子研究

陈康, 许希武, 郭树祥

南京航空航天大学机械结构力学及控制国家重点实验室, 江苏南京 210016

收稿日期:2012-09-17 修回日期:2012-11-28 出版日期:2013-08-25 发布日期:2012-12-24
通讯作者: 许希武 E-mail:xwxu@nuaa.edu.cn
作者简介:陈康男,博士研究生。主要研究方向:工程问题的力学建模与数值仿真。Tel:025-84891780 E-mail:chenkang@nuaa.edu.cn;许希武男,博士,教授,博士生导师。主要研究方向:复合材料结构力学,飞行器结构完整性评定技术和计算力学。Tel:025-84896588 E-mail:xwxu@nuaa.edu.cn
基金资助:
国家自然科学基金(11272146)

Stress Intensity Factors at Crack Tips in Two-directional Graded Composites

CHEN Kang, XU Xiwu, GUO Shuxiang

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2012-09-17 Revised:2012-11-28 Online:2013-08-25 Published:2012-12-24
Supported by:
National Natural Science Foundation of China (11272146)

摘要/Abstract

摘要：

为了进一步改善梯度复合材料力学分析及设计水平,推导了一种适用于双向梯度复合材料断裂特性分析的梯度扩展单元法(XFEM)。采用细观力学方法描述材料沿梯度方向变化的力学属性,通过线性插值位移场给出了4节点梯度扩展单元随空间位置变化的刚度矩阵,建立了结构的连续梯度有限元模型,并采用交互能量积分计算得到了裂纹尖端的应力强度因子(SIF)。通过与已有文献结果对比验证了梯度扩展单元的优越性,并讨论了双向梯度结构中相关参数对SIF的影响规律,得到结论:梯度扩展单元能够提高梯度材料中裂纹尖端SIF的计算精度,其计算结果随着网格密度的增加迅速收敛于精确解;双向梯度结构的组份分布形式和属性梯度能够明显影响裂纹尖端的SIF;对于多裂纹双向梯度结构,裂纹间的相互作用增大了裂纹尖端的SIF,弹性模量大的一侧SIF较大。

关键词: 双向梯度复合材料, 有限单元法, 应力强度因子, 梯度扩展单元法, 交互能量积分

Abstract:

To further improve the level of mechanical analysis and design of graded composites, a graded extended finite element method (XFEM) is proposed for fracture characteristic analysis in two-directional graded composites whose varying properties along gradient directions are predicted by a micromechanics method. The spatially varying stiffness matrices of 4-node graded extended finite elements are calculated by linear interpolation of displacement fields and a continuous gradient finite element model is established. The stress intensity factors (SIFs) of crack-tip are finally calculated by the interaction energy integral method. The superiority of graded XFEM is verified through comparison with relevant literature. Furthermore, the influence of material parameters on SIFs in two-directional graded structures is discussed in detail. The calculation accuracy of SIFs can be obviously improved by graded XFEM and the results converge to accurate solutions quickly as mesh density increases. The SIFs in two-directional graded structures can be markedly affected by constituent distribution and property gradients. In two-directional graded structures with multiple interior cracks, the SIFs are enlarged by the interaction between cracks and are larger at positions with higher elastic modulus.

Key words: two-directional graded composite, finite element method, stress intensity factor, graded extended finite element method, interaction energy integral

中图分类号:

陈康, 许希武, 郭树祥. 双向梯度复合材料裂纹尖端应力强度因子研究[J]. 航空学报, 2013, 34(8): 1832-1845.

CHEN Kang, XU Xiwu, GUO Shuxiang. Stress Intensity Factors at Crack Tips in Two-directional Graded Composites[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(8): 1832-1845.

参考文献

[20]

[20]

[1] Yin H M, Paulino G H, Buttlar W G, et al. Micromechanics-based thermoelastic model for functionally graded particulate materials with particle interactions. Journal of the Mechanics and Physics of Solids, 2007, 55(1): 132-160.

[2] Wang B L, Han J C, Du S Y. Thermal stresses analysis and optimization of substrate/functional graded coating structure. Acta Aeronautica et Astronautica Sinica, 2000, 21(3): 286-288. (in Chinese) 王保林, 韩杰才, 杜善义. 基底/功能梯度涂层结构的动态热应力分析及结构优化. 航空学报, 2000, 21(3): 286-288.

[3] Konda N, Erdogan F. The mixed mode crack problem in a nonhomogeneous elastic medium. Engineering Fracture Mechanics, 1994, 47(4): 533-545.

[4] Kim J H, Paulino G H. Finite element evaluation of mixed mode stress intensity factors in functionally graded materials. International Journal for Numerical Methods in Engineering, 2002, 53(8): 1903-1935.

[5] Zhang X H, Li Y H, Han J C, et al. Cracking problem analysis of TiC-Ni FGM using finite element method. Acta Materiae Compositae Sinica, 2001, 18(4): 87-92. (in Chinese) 张幸红, 李亚辉, 韩杰才, 等. TiC-Ni系功能梯度材料的断裂力学有限元分析. 复合材料学报, 2001, 18(4): 87-92.

[6] Huang G Y, Wang Y S, Yu S W. A new multi-layered model for in-plane fracture analysis of functionally graded materials (FGM). Acta Mechanica Sinica, 2005, 37(1): 1-8. (in Chinese) 黄干云, 汪越胜, 余寿文. 功能梯度材料的平面断裂力学分析. 力学学报, 2005, 37(1): 1-8.

[7] Nemat-Alla M, Noda N. Edge crack problem in a semi-infinite FGM plate with a bi-directional coefficient of thermal expansion under two-dimensional thermal loading. Acta Mechanica, 2003, 144(3-4): 211-229.

[8] Nemat-Alla M. Reduction of thermal stresses by developing two-dimensional functionally graded materials. International Journal of Solids and Structures, 2003, 40(26): 7339-7356.

[9] Nemat-Alla M, Ahmed Khaled I E, Hassad-Allah I. Elastic-plastic analysis of two-dimensional functionally graded materials under thermal loading. International Journal of Solids and Structures, 2009, 46(14-15): 2774-2786.

[10] Nemat-Alla M. Reduction of thermal stresses by composition optimization of two-dimensional functionally graded materials. Acta Mechanica, 2009, 208(3-4): 147-161.

[11] Asgari M, Akhlaghi M. Transient heat conduction in two-dimensional functionally graded hollow cylinder with finite length. Heat Mass Transfer, 2009, 45(11): 1383-1392.

[12] Asgari M, Akhlaghi M. Transient thermal stresses in two-dimensional functionally graded thick hollow cylinder with finite length. Archive of Applied Mechanics, 2010, 80(4): 353-376.

[13] Torshizian M R, Kargarnovin M H, Nasirai C. Mode Ⅲ fracture of an arbitrary oriented crack in two dimensional functionally graded material. Mechanics Research Communications, 2011, 38(3): 164-169.

[14] Alipour M M, Shariyat M, Shaban M. A semi-analytical solution for free vibration of variable thickness two-directional-functionally graded plates on elastic foundations. International Journal of Mechanics and Materials in Design, 2010, 6(4): 293-304.

[15] Aragh B S, Hedayati H. Static response and free vibration of two-dimensional functionally graded metal/ceramic open cylindrical shells under various boundary conditions. Acta Mechanica, 2012, 223(2): 309-330.

[16] Asemi K, Salehi M, Akhlaghi M. Elastic solution of a two-dimensional functionally graded thick truncated cone with finite length under hydrostatic combined loads. Acta Mechanica, 2011, 217(1-2): 119-134.

[17] Nie G J, Zhong Z. Axisymmetric bending of two-directional functionally graded circular and annular plates. Acta Mechanica Solida Sinica, 2007, 20(4): 289-295.

[18] Hedia H S, Shabara M A N, El-Midany T T, et al. Improved design of cementless hip stems using two-dimensional functionally graded materials. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2006, 79(1): 42-49.

[19] Sukumar N, Prevost J H. Modeling quasi-static crack growth with the extended finite element method, Part I: computer implementation. International Journal of Solids and Structures, 2003, 40(26): 7513-7537.

[20] Kim J H, Paulino G H. An accurate scheme for mixed-mode fracture analysis of functionally graded materials using the interaction integral and micromechanics models. International Journal for Numerical Methods in Engineering, 2003, 58(10): 1457-1497.

[21] Erdogan F, Wu B H. The surface crack problem for a plate with functionally graded properties. ASME Journal of Applied Mechanics, 1997, 61(3): 449-456.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

双向梯度复合材料裂纹尖端应力强度因子研究

Stress Intensity Factors at Crack Tips in Two-directional Graded Composites

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	赵鋆赫, 王生楠. 基于深度学习的权函数法应力强度因子求解[J]. 航空学报, 2023, 44(19): 228367-228367.
[2]	冯振宇, 柴崇博, 邹君, 牟浩蕾. 含多裂纹对接板应力强度因子三维有限元分析[J]. 航空学报, 2021, 42(5): 524250-524250.
[3]	段佳桐, 隋福成, 刘汉海, 解放, 欧阳天, 鲍蕊. 弯曲载荷下薄壁结构疲劳裂纹扩展性能[J]. 航空学报, 2021, 42(5): 524326-524326.
[4]	袁维东, 高瞻, 刘浩康, 缪国峰. 基于改进准则法的复合壳阻尼结构拓扑减振动力学优化[J]. 航空学报, 2020, 41(1): 223162-223162.
[5]	赵晓辰, 吴学仁, 童第华, 徐武, 陈勃, 胡本润. 无限板孔边裂纹问题的高精度解析权函数解[J]. 航空学报, 2018, 39(9): 221976-221987.
[6]	李政鸿, 徐武, 张晓晶, 余音. 多孔多裂纹平板的疲劳裂纹扩展试验与分析方法[J]. 航空学报, 2018, 39(7): 221867-221867.
[7]	刘双燕, 李玉龙, 薛璞, 石霄鹏. 裂纹参数和筋条布局对共振九宫板动态应力强度因子的影响[J]. 航空学报, 2018, 39(1): 221423-221423.
[8]	柴国钟, 吕君, 鲍雨梅, 姜献峰, 丁浩. 表面裂纹疲劳扩展和寿命计算的高效高精度数值分析方法[J]. 航空学报, 2017, 38(12): 221291-221291.
[9]	祝青钰, 韩峰, 隋明丽. 无限大板孔边双裂纹应力强度因子和裂纹面张开位移[J]. 航空学报, 2016, 37(3): 883-893.
[10]	童第华, 吴学仁, 刘建中. 由裂纹嘴位移确定双悬臂梁试样应力强度因子的权函数解法[J]. 航空学报, 2016, 37(2): 609-616.
[11]	景致, 吴学仁, 童第华, 陈勃. 焊接残余应力强度因子的权函数法求解[J]. 航空学报, 2015, 36(11): 3586-3594.
[12]	汤英, 张晓晶, 吴学仁. 单边缺口拉伸试样喷丸强化残余应力及其三维应力强度因子分析[J]. 航空学报, 2012, 33(7): 1265-1274.
[13]	王森;刘马宝;王国力;王新波. 广布损伤的试验研究与有限元分析[J]. 航空学报, 2010, 31(8): 1578-1583.
[14]	陈勃;高玉魁;吴学仁;马少俊. 喷丸强化7475-T7351铝合金的小裂纹行为和寿命预测[J]. 航空学报, 2010, 31(3): 519-525.
[15]	杨茂胜;陈跃良. 微动疲劳结构应力强度因子有限元分析[J]. 航空学报, 2010, 31(10): 1968-1973.