[1] Zheng L Y, McMahon C A, Li L, et al. Key characteristics management in product lifecycle management: a survey of methodologies and practices. Proceedings of the Institution of Mechanical Eegineerings, Part B: Journal of Engineering Manufacture, 2008, 222(8): 989-1008. [2] Thornton A C. Variation risk management: focusing quality improvements in product development and production. New Jersey: Wiley, 2004. [3] Carlson J S. How to redce geometrical variation in assembled products. Goteborg: Department of Mathematical Statistics, Chalmers University of Technology and Goteborg University, 2000. [4] Marguet B, Ribere B. Measurement-assisted assembly applications on airbus final assembly line. SAE Transactions, 2003, 112(1): 372-375. [5] Qiu B G, Jiang J X, Bi Y B, et al. Posture alignment and joining test system for large aircraft fuselages. Acta Aeronautica et Astronautica Sinica, 2011, 32(5): 908-919. (in Chinese) 邱宝贵, 蒋君侠, 毕运波, 等. 大型飞机机身调姿与对接试验系统.航空学报, 2011, 32(5): 908-919. [6] Wang S F, Zhang J H, Liu Z G, et al. Motion planning for posture alignment machine tool oriented fuselage panel. Journal of Xi’an Jiao Tong University, 2011, 45(3): 102-106. (in Chinese) 王少峰, 张进华, 刘志刚, 等. 大型飞机机身壁板装配位姿调整系统的运动规划. 西安交通大学学报, 2011, 45(3): 102-106. [7] Beutler F, Hanebeck U D. Closed-form range-based posture estimation based on decoupling translation and orientation. 2005 IEEE International Conference on Acoustics, Speech, and Signal Processing, 2005, 4: 989-992. [8] Fischler M A, Bolls R C. Random sample consensus: a paradigm for model fitting with applications to image analysis and automated cartography. Communication of the ACM, 1981, 24(6): 381-395. [9] Lowe D G. Fitting parameterized three-dimensional models to images. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1991, 13(5): 441-450. [10] Vincze M, Prenninger J P, Gander H. A laser tracking system to measure position and orientation of robot end effectors under motion. The International Journal of Robotics Research, 1994, 13(4): 305-314. [11] Laroche E, Kagami S. Dynamical models for position measurement with global shutter and rolling shutter cameras. 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009: 5204-5209. [12] Matsubara H, Tsukada T, Ito H, et al. A three dimensional position measurement method using two pan-tilt cameras. R&D Review of Toyota CRDL, 2003, 38(2): 43-49. [13] Xu W. Study on the self-measuring method of the attitude and position based on geometrical characteristic parameter. Tianjin: College of Precision Instrument & Optic-Electronics Engineering, Tianjin University, 2008. (in Chinese) 许薇. 基于几何特征量的自主位姿测量方法的研究. 天津: 天津大学精密仪器与光电子工程学院, 2008. [14] Zhang S J, Cao X B, Chen X Q. Closed-form method for relative pose parameters of spacecraft based on optical measurement. Acta Aeronautica et Astronautica Sinica, 2005, 26(2): 214-218. (in Chinese) 张世杰, 曹喜滨, 陈雪芹. 航天器相对位姿参数光学测量解析算法. 航空学报, 2005, 26(2): 214-218. [15] Weber T, Motavalli S, Fallahi B, et al. A unified approach to form error evaluation. Precision Engineering, 2002, 26(3): 269-278. [16] Ni A J, Zheng L Y. Optimal configuration method for large-scale measurement systems based on form error uncertainty. Acta Metrologica Sinica, 2011, 32(4): 289-295. (in Chinese) 倪爱晶, 郑联语. 基于形状误差不确定度的大尺寸测量系统优化配置方法. 计量学报, 2011, 32(4): 289-295. [17] Zhang F M, Qu X H, Ye S H. Multiple sensor fusion in large scale measurement. Optic and Precision Engineering, 2008, 16(7): 1236-1240.(in Chinese) 张福民, 曲兴华, 叶声华. 大尺寸测量中多传感器的融合. 光学精密工程, 2008, 16(7): 1236-1240. [18] Shi Y. Particle swarm optimization: developments, applications and resources. Proceedings of the 2011 Congress on Evolutionary Computation, 2001, 1: 81-86. |