阻拦系统动力学建模与仿真

电子与自动控制

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

阻拦系统动力学建模与仿真

朱齐丹, 闻子侠, 张智

哈尔滨工程大学自动化学院, 黑龙江哈尔滨 150001

收稿日期:2011-06-15 修回日期:2011-07-20 出版日期:2012-03-25 发布日期:2012-03-24
通讯作者: 朱齐丹 E-mail:zhuqidan@hrbeu.edu.cn

Kinetic Modeling and Simulation of Shipboard Arresting System

ZHU Qidan, WEN Zixia, ZHANG Zhi

College of Automation, Harbin Engineering University, Harbin 150001, China

Received:2011-06-15 Revised:2011-07-20 Online:2012-03-25 Published:2012-03-24

摘要/Abstract

摘要： 以Mark 7 Mod 1型阻拦系统为基础,借助其中的油液流量系数的经验公式,将其扩展到Mark 7 Mod 3型阻拦系统。首先,将K-5型凸轮曲线进行扩展,重新设计凸轮曲线,使主液压缸的行程增加到4.65 m,进而增加了阻拦系统的容量,实现阻拦系统的优化。其次,考虑到主液压缸的质量不能被忽略,通过引入绳索的弹性形变,实现了阻拦过程主液压缸惯性、滑轮缓冲装置的惯性和飞机惯性的综合动力学仿真。再次,增加了滑轮缓冲系统,使阻拦系统的液压模型更为准确、完整。最后,在考虑了凸轮阀控制曲线以及锥形阀流量系数等各项参数变化的情况下,研究飞机各状态与阻拦系统中各参数的相互影响情况。

关键词: 液压流体, 甲板阻拦装置, 动力学仿真, 重量选择器, 凸轮控制曲线

Abstract: This study is based on the shipboard Mark 7 Mod 1 arresting system and extends it to Mark 7 Mod 3 arresting system with the help of its experiential formula.First,the stroke of K-5 cam is extended to 4.65 m by redesigning the cam configuration to optimize the arresting system,so that the capacity of the arresting system is increased.Second,the mass of the main pressure carriage and the elasticity of the cable should be considered in the arresting system,so the kinetic simulation consists of the inertia of the main pressure carriage,the damper sheaves and the aircraft.Third,the arresting system model is extended with the addition of damper sheaves,so a more accurate and complete model is established.Finally,in light of the cam configuration and the discharge coefficient variation,an accurate hydraulic model is proposed to analyze the relationship between the states of the aircraft and the arresting system parameters.

Key words: hydraulic fluid, carrier-based arresting system, kinetic simulation, weight selector, contour of the cam

中图分类号:

V245.1

朱齐丹, 闻子侠, 张智. 阻拦系统动力学建模与仿真[J]. 航空学报, 2012, (3): 520.

ZHU Qidan, WEN Zixia, ZHANG Zhi. Kinetic Modeling and Simulation of Shipboard Arresting System[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, (3): 520.

参考文献

[1] Song J C, Wang Y, Zhang Z W,et al.Study on the electro-hydraulic proportional controlled aircraft arresting system.Acta Aeronautica et Astronautica Sinica,2005,26(5): 520-523.(in Chinese) 宋锦春, 王艳, 张志伟, 等.飞机阻拦系统电液比例控制研究.航空学报, 2005,26(5): 520-523.

[2] Wu J, Yuan Z H,He C A.Control principle and method analysis of an aircraft arresting system.Journal of Air Force Engineering University:Natural Science Edition,2002, 4(4): 1-3.(in Chinese) 吴娟, 袁朝辉, 何长安.某型飞机阻拦系统控制原理及方法分析.空军工程大学学报:自然科学版, 2002, 4(4): 1-3.

[3] Wu J.Research on analysis and control of airplane arresting system.Xi'an:Northwestern Polytechnical University,2003.(in Chinese) 吴娟.飞机拦阻系统分析与控制研究.西安:西北工业大学, 2003.

[4] Zhang S S, Jin D P.Nonlinear optimal control of aircraft arresting pross.Acta Aeronautica et Astronautica Sinica, 2009, 30(5): 849-854.(in Chinese) 张澍森, 金栋平.飞机阻拦过程的非线性最优控制.航空学报, 2009, 30(5): 849-854.

[5] Jin C J,Hong G X.Dynamic problems of carrier aircraft catapult launching and arrest landing.Acta Aeronautica et Astronautica Sinica,1990,11(12):B534-B542.(in Chinese) 金长江, 洪冠新.飞舰载机弹射起飞及拦阻着舰动力学问题.航空学报, 1990, 11(12): B534-B542.

[6] Zhang M H, Yuan L, Hong G X.Aircraft carrier hydraulic arresting gear arresting force modeling and simulation.Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(1): 100-103.(in Chinese) 张明辉, 袁理, 洪冠新. 航空母舰液压阻拦系统阻拦力建模与仿真.北京航空航天大学学报, 2010, 36(1): 100-103.

[7] Louise M F.A study of the effect of different cam designs on Mark 7 Mod 1 arresting gear performance.ADA 061486, 1978.

[8] George M L.Development of a mathematical performance prediction model for rotary-hydraulic-type arresting gears.AD893157, 1972.

[9] U.S.Navy Landing Signal Officer School.Landing signal officer reference manual. Virginia: Landing Signal Officers School Naval Air Station Oceana,1999: I-9-1-I-7-31.

[10] Kraut W K, Swiencinski H J.Reliability of the Mark 7 Mod 3 arresting gear.AD-845390, 1968.

[11] Barron R T.Design optimization and performance prediction of a shorebased aircraft recovery system by mathematical model computer simulation.AD-740098, 1972.

[12] Rolek L S, Jr.Performance analysis of a turbo-type energy absorber for an aircraft carrier arresting gear.AD-728682,1971.

[13] Cliff R, Kahn J P.Availability and expectation of successful operation of Mark7 arresting gear.AD-693468, 1969.

[14] Licoln J W.Aircraft landing dynamics analysis.Volume 1:equations of motion.ADA240123, 1987.

[15] Kevlin S G.Evaluation of the 500s arresting-gear system.AD-886597, 1971.

[16] Glessner C, Cane S T.Flight deck arresting gear and barricade configuration criteria for Mark 7 Mod 3 arresting engine.AD-864089, 1969.

[17] Mikhaluk D, Voinov I, Borovkov A. Finite element modeling of the arresting gear and simulation of the aircraft deck landing dynamics.7th European LS-DYNA Conference.2009.

[18] Li Z Y, Wan H X, He X F, et al.Hydraulic component and system.Beijing:China Machine Press, 2005: 165-166.(in Chinese) 李壮云, 万会雄, 贺小峰, 等.液压元件与系统.北京:机械工业出版社, 2005: 165-166.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

阻拦系统动力学建模与仿真

Kinetic Modeling and Simulation of Shipboard Arresting System

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

本文评价

[1]	王廷章, 全齐全, 艾鑫, 唐德威, 邓宗全. 小行星探测器电磁阻尼着陆缓冲遇阻特性[J]. 航空学报, 2023, 44(13): 227783-227783.
[2]	师妍, 万志强, 吴志刚, 杨超. 基于气动力降阶的弹性飞机阵风响应仿真分析及验证[J]. 航空学报, 2022, 43(1): 125474-125474.