航空学报 > 1995, Vol. 16 Issue (2): 46-50

圆孔周边应力集中的非局部度量

刘振国1, 诸德培1, 周振功2   

  1. 1. 西北工业大学飞机系强度所, 西安, 710072;2. 西安交通大学工程力学系, 西安, 710049
  • 收稿日期:1994-01-04 修回日期:1994-09-24 出版日期:1995-04-25 发布日期:1995-04-25

ON THE NONLOCAL THEORY MEASUREMENT OF STRESS CONCENTRATION NEAR THE EDGE OF A CIRCULAR HOLE

Liu Zhenguo Zhu Depei1   

  1. Department of Aircraft Engineering, Northwestern Polytechnical University, Xi'an, 710072;Department of Engineering Mechanics, Xi'an Jiaotong University, Xi'an, 710049
  • Received:1994-01-04 Revised:1994-09-24 Online:1995-04-25 Published:1995-04-25

摘要: 应用非局部线弹性理论详细研究了含圆孔无限大板受单向均匀拉伸时孔边的应力集中问题。研究结果表明,孔边的应力集中系数不再恒等于3,而是随孔径与材料内部特征长度的比值变化而变化,因而较经典线弹性理论结果更符合实际。

关键词: 应力集中, 特征分析, 圆孔

Abstract: The problem of stress concentration near the edge of a circular hole in an infinitely large plate under uniform uniaxial tension is studied based on the nonlocal linear elasticity. The study shows that the maximum stress near the edge of a circular hole is not three times the uniform tension stress, but varies with the ratio of hore radius to internal characteristic length of materials, so the result is more in accord with the actual situation than that of classical linear elasticity.

Key words: st ress concentration, signature aralysis, circular hole

中图分类号: