李萨如图在磁记忆二维定量检测中的应用

doi:10.7527/S1000-6893.2013.0068

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

李萨如图在磁记忆二维定量检测中的应用

周培¹, 任吉林¹, 孙金立², 宋凯¹, 王振¹

1. 南昌航空大学无损检测技术教育部重点实验室, 江西南昌 330063;
2. 海军航空工程学院青岛分院, 山东青岛 266041

收稿日期:2012-11-01 修回日期:2013-01-04 出版日期:2013-08-25 发布日期:2013-01-22
通讯作者: 任吉林 E-mail:jlren@tom.com
作者简介:周培女,硕士研究生。主要研究方向:电磁检测,磁记忆检测。Tel:0791-83953491 E-mail:546589827@qq.com;任吉林男,教授,中国无损检测学会副理事长、江西省无损检测学会理事长。主要研究方向:电磁无损检测。Tel:0791-83953491 E-mail:jlren@tom.com
基金资助:
国家自然科学基金(51065022);江西省仪器科学与技术学科研究生教育创新基地资助项目

Application of Lissajous Figure in Two-dimensional Magnetic Memory Detection

ZHOU Pei¹, REN Jilin¹, SUN Jinli², SONG Kai¹, WANG Zhen¹

1. Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang Hangkong University, Nanchang 330063, China;
2. Qingdao Branch, Naval Aeronautical Engineering Academy, Qingdao 266041, China

Received:2012-11-01 Revised:2013-01-04 Online:2013-08-25 Published:2013-01-22
Supported by:
National Natural Science Foundation of China(51065022);Jiangxi Instrument Science and Technology Subject Graduate Education Innovation Base of Funded Projects

摘要/Abstract

摘要：

依据磁记忆二维检测原理,将磁信号法向分量存在过零点,切向分量存在最大值联合起来检测,并引入李萨如图分析法,对用法向分量和切向分量合成的类李萨如图以及将法向分量和切向分量微分后合成的李萨如图进行比较分析,得出可以利用微分后合成的李萨如图封闭区域面积的大小来判断应力集中程度及用在不同的应力集中程度下李萨如图面积数量级作为阈值的结论。从而可为利用李萨如图分析法对磁记忆二维检测进行定量分析的进一步研究提供试验分析依据。

关键词: 磁记忆, 二维检测法, 应力集中, 李萨如图, 定量分析

Abstract:

In the paper, the theory of two-dimensional magnetic memory testing is employed. The zero point in the normal component and the maximum point in the tangential component are together adopted for detection. Lissajous figure analysis is introduced. The Lissajous figure of synthesis for the normal and tangential components and the Lissajous figure of synthesis for the differential value of the normal component and the tangential component are used for analysis. It turns out that the area of the Lissajous figure of synthesis for the differential value of the normal and the tangential components can be used to determine the degree of stress concentration, and it is concluded that in different stress concentration degrees,the order of magnitude of the Lissajous figure area can be used as a threshold. This study can provide a test analysis basis for further research on the quantitative analysis of two-dimensional detection of magnetic memory by using the Lissajous figure analysis method.

Key words: metal magnetic memory, two-dimensional testing, stress concentration, Lissajous figure, quantitative analysis

中图分类号:

周培, 任吉林, 孙金立, 宋凯, 王振. 李萨如图在磁记忆二维定量检测中的应用[J]. 航空学报, 2013, 34(8): 1990-1997.

ZHOU Pei, REN Jilin, SUN Jinli, SONG Kai, WANG Zhen. Application of Lissajous Figure in Two-dimensional Magnetic Memory Detection[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(8): 1990-1997.

参考文献

[1] Ren J L, Lin J M. Metal magnetic memory testing. Beijing:China Electric Power Press, 2000: 3-4. (in Chinese) 任吉林, 林俊明. 金属磁记忆检测技术. 北京: 中国电力出版社, 2000: 3-4.

[2] Doubov A A. Diagnostics of metal items and equipment by means of metal magnetic memory. Proceeding of CHSNDT 7th Conference on NDT and International Research Symposium, 1999: 181-187.

[3] Ren J L, Lin J M. Electromagnetic non-destructive testing. Beijing: Science Press, 2008: 377-379. (in Chinese) 任吉林, 林俊明. 电磁无损检测. 北京: 科学出版社, 2008: 377-379.

[4] Doubov A A. Express method of quality control of a spot resistance welding with usage of metal magnetic memory. Welding in the World, 2002, 46(6): 317-320.

[5] Notoji A. Strain magnetization properties and do main structure change of silicon steel sheets due to plastic stress. IEEE Transactions on Magnetics, 2000, 36(5): 3074-3077.

[6] Zhong W C. Theoretical fundamentals of the metal magnetic memory diagnostics. Nondestructive Testing, 2001, 23(10): 424-426. (in Chinese) 仲维畅. 金属磁记忆法诊断的理论基础. 无损检测, 2001, 23(10): 424-426.

[7] Huang S L, Li L M. Stress distribution testing by metal magnetic memory method. Nondestructive Testing, 2002, 24(5): 212-214. (in Chinese) 黄松岭, 李路明. 用金属磁记忆方法检测应力分布. 无损检测, 2002, 24(5): 212-214.

[8] Yang J X. Study on the synthesized path of two simple harmonic vibrations with one vertical to another. Journal of Xihua University:Natural Science, 2008, 27(2): 76-78. (in Chinese) 杨继先. 相互垂直的谐振动合成轨迹研究.西华大学学报:自然科学版, 2008, 27(2): 76-78.

[9] Yang J X. Study on the properties of Lissajous' figures. Journal of Xihua University:Natural Science, 2008, 27(6): 98-100. (in Chinese) 杨继先. 李萨如图形的性质研究. 西华大学学报:自然科学版, 2008, 27(6): 98-100.

[10] Ren J L, Wang J. New method for metal magnetic memory quantitative analysis. Chinese Journal of Scientific Instrument, 2010, 31(2): 431-436. (in Chinese) 任吉林, 王进. 一种磁记忆检测定量分析的新方法. 仪器仪表学报, 2010, 31(2):431-436.

[11] Ren J L, Chen X, Luo S C, et al. Analysis of high-cycle fatigue damage by two-dimensional metal magnetic memory testing. Acta Aeronautica et Astronautica Sinica, 2012, 33(2):1147-1155. (in Chinese) 任吉林,陈曦,罗声彩,等. 高周疲劳损伤的磁记忆二维检测研究.航空学报,2012, 33(2):1147-1155.

[12] Su L H, Ma X H, Chen G, et al. Study on magnetic memory effect of fatigue damage of ferromagnetic material. Journal of Test and Measurement Technology, 2009, 23(2): 145-150. (in Chinese) 苏兰海, 马祥华, 陈工, 等. 铁磁材料零件疲劳损伤磁记忆检测方法的实验. 测试技术学报, 2009, 23(2): 145-150.

[13] Li J M, Zhang Y L. Study of magnetic memory effect of Q235 steel material under tension condition. Pressure Vessel Technology, 2008, 25(7): 10-13. (in Chinese) 李济民, 张亦良. Q235钢材料拉伸时磁记忆效应的试验研究. 压力容器, 2008, 25(7): 10-13.

[14] Tang J H, Pan Q H, Ren J L, et al. Characteristic analysis of magnetic memory signals of 20# steel under static loading tensile. Chinese Journal of Scientific Instrument, 2011, 32(2): 336-341. (in Chinese) 唐继红, 潘强华, 任吉林, 等. 静载拉伸下磁记忆信号变化特征分析. 仪器仪表学报,2011, 32(2): 336-341.

[15] Ren J L, Gao C F, Song K. Application of magnetic memory testing on ferromagnetic items in power station. Chinese Journal of Scientific Instrument, 2003, 24(5): 470-476. (in Chinese) 任吉林, 高春法, 宋凯. 电站铁磁构件的磁记忆检测. 仪器仪表学报, 2003, 24(5): 470-476.

[16] Wang D, Dong S Y, Xu B S, et al. Study on metal magnetic memory testing of stress concentration position. Failure Analysis and Prevention, 2007, 2 (2): 12-15. (in Chinese) 王丹, 董世运, 徐滨士, 等. 应力集中部位的金属磁记忆检测研究. 失效分析与预防, 2007, 2 (2): 12-15.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

李萨如图在磁记忆二维定量检测中的应用

Application of Lissajous Figure in Two-dimensional Magnetic Memory Detection

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张宏献, 李学军, 蒋玲莉, 杨大炼, 陈雨蒙. 航空发动机双转子系统不对中研究进展[J]. 航空学报, 2019, 40(6): 22717-022717.
[2]	任尚坤, 祖瑞丽. 基于磁记忆技术对含缺陷焊缝的疲劳试验[J]. 航空学报, 2019, 40(3): 422454-422454.
[3]	李伟斌, 魏东, 杜雁霞, 易贤, 杨肖峰. 动态结冰微观孔隙结构定量分析[J]. 航空学报, 2018, 39(2): 121536-121536.
[4]	任尚坤, 徐振瀚. 铁磁试件应变损伤微结构蜕变的灵敏微分磁导率评价[J]. 航空学报, 2014, 35(5): 1452-1458.
[5]	胡春燕, 刘新灵, 陈星, 陶春虎. 主起落架上转轴开裂原因分析[J]. 航空学报, 2014, 35(2): 461-468.
[6]	姜杰凤, 董辉跃, 毕运波. 高锁螺栓干涉配合安装工艺参数对凸瘤的影响分析[J]. 航空学报, 2013, 34(4): 936-945.
[7]	任吉林, 陈曦, 罗声彩, 周培, 刘昌奎. 高周疲劳损伤的磁记忆二维检测研究[J]. 航空学报, 2012, (6): 1147-1155.
[8]	李新蕾;任吉林;任尚坤;陈曦;付任珍. 铁磁构件残余寿命评估方法[J]. 航空学报, 2010, 31(10): 2109-2114.
[9]	刘昌奎;陶春虎;陈星;董世运. 基于金属磁记忆技术的18CrNi4A钢缺口试件疲劳损伤模型[J]. 航空学报, 2009, 30(9): 1641-1647.
[10]	张成成;姚卫星;叶彬. 连接件疲劳寿命分析的等效SSF法[J]. 航空学报, 2009, 30(2): 271-275.
[11]	Ren Jilin;Bai Lu;Fan Zhenzhong;Liu Changkui. 航空铁磁材料磁记忆检测新方法[J]. 航空学报, 2009, 30(11): 2224-2228.
[12]	任吉林;王东升;宋凯;任尚坤;唐继红. 应力状态对磁记忆信号的影响[J]. 航空学报, 2007, 28(3): 724-728.
[13]	张义民;郑建校;李世德. 基于FEM-NN-MCS模拟应力集中系数的结构可靠性分析[J]. 航空学报, 2006, 27(6): 1102-1106.
[14]	吴声;张晓莉;麦汉超;唐金标. 含SMA纤维的复合材料层合板的应力集中实验与分析[J]. 航空学报, 2003, 24(2): 134-136.
[15]	龚明;赵建华;董本涵;王贤峰;李承智. 含孔薄板孔边疲劳裂纹的萌生和扩展[J]. 航空学报, 2002, 23(3): 202-205.