一种针对局部结构的有限元模型修正方法

doi:10.7527/S1000-6893.2020.23834

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

一种针对局部结构的有限元模型修正方法

范新亮, 王彤, 夏遵平

南京航空航天大学机械结构力学及控制国家重点实验室, 南京 210016

收稿日期:2020-01-13 修回日期:2020-08-18 发布日期:2020-09-28
通讯作者: 王彤 E-mail:wt78@nuaa.edu.cn
基金资助:
航空科学基金（20161352011）；江苏高校优势学科建设工程资助

A finite element model updating method for local structures

FAN Xinliang, WANG Tong, XIA Zunping

State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2020-01-13 Revised:2020-08-18 Published:2020-09-28
Supported by:
Aeronautical Science Foundation of China(20161352011); A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions

摘要/Abstract

摘要： 针对实际结构有限元模型（FEM）的建模误差通常仅存在于局部区域，提出了一种对局部结构单独进行模型修正的方法。首先，根据频响函数（FRF）解耦理论得到由残余结构频响函数与包含待修正参数的局部结构动刚度所重构的整体结构频响函数的拟合值，然后通过迭代优化使其与测量值的残差最小化，从而得到参数的极大似然估计。在此基础上，将残差关于参数的灵敏度以局部结构动力学矩阵表示，建立了模型修正的基本方程，利用整体结构的测试数据即可直接对分离出来的局部结构进行模型修正。最后，对喷气式飞机和三角机翼飞机分别进行了数值模拟和实验研究，验证了所提方法的可行性和有效性。结果表明，所提方法可以成功地用于仅局部区域含有建模误差的实际结构有限元模型的修正，修正后的有限元模型的动态特性与实际结构有较好的一致性。

关键词: 模型修正, 频响函数, 局部结构, 频响函数解耦, 抗噪性

Abstract: For an actual structure, the modeling errors of the Finite Element Model(FEM) often only exist in some local area. A model updating method is presented to update the local structures. Firstly, according to the Frequency Response Function (FRF) decoupling method, the fitting FRF of the global structure is reconstructed from the residual structure FRF and the local structure dynamic stiffness including the parameters to be updated. Then, the iterative optimization process of maximum likelihood estimation is carried out to get the parameters minimizing the residual error between the fit value and the measured value. On this basis, the sensitivity of the residual error to the parameters is represented by the dynamic matrix of the local structure, and the fundamental equation for model updating is constructed. The measured FRF of the global structure is utilized to update the FEM of the separated local structure directly. Finally, numerical simulation of a jet plane and experimental investigation of the delta-winged aircraft are performed to validate the feasibility and efficiency of the present method. The obtained results show that the proposed method can be successfully used to update the model of the actual structure with modeling errors only in the local area, achieving a good agreement between the dynamic properties of the updated FEM and the actual structure.

Key words: model updating, frequency response function, local structure, FRF decoupling, noise resistance

中图分类号:

V214
O327

范新亮, 王彤, 夏遵平. 一种针对局部结构的有限元模型修正方法[J]. 航空学报, 2020, 41(12): 223834-223834.

FAN Xinliang, WANG Tong, XIA Zunping. A finite element model updating method for local structures[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020, 41(12): 223834-223834.

参考文献

[1] 张令弥. 动态有限元模型修正技术及其在航空航天结构中的应用[J]. 强度与环境, 1994(2):10-17. ZHANG L M. Dynamic finite element model updating and its application in aerospace structures[J]. Structure & Environment Engineering, 1994(2):10-17(in Chinese).
[2] YUAN P P, REN W X, ZHANG J. Dynamic tests and model updating of nonlinear beam structures with bolted joints[J]. Mechanical Systems and Signal Processing, 2019, 126:193-210.
[3] JHA A K, DEWANGAN P, SARANGI M. Model updating of rotor systems by using nonlinear least square optimization[J]. Journal of Sound & Vibration, 2016, 373:251-262.
[4] MODAK S V, KUNDRA T K, NAKRA B C. Comparative study of model updating methods using simulated experimental data[J]. Computers & Structures, 2002, 80(5-6):437-447.
[5] 彭珍瑞, 曹明明, 刘满东. 基于加速度频响函数小波分解的模型修正方法[J]. 航空学报, 2020, 41(7):223548. PENG Z R, CAO M M,LIU M D. A model updating method based on wavelet decomposition of acceleration frequency response function[J]. Acta Aeronautica et Astronautica Sinica,2020, 41(7):223548(in Chinese).
[6] ESFANDIARI A. Structural model updating using incomplete transfer function of strain data[J]. Journal of Sound & Vibration, 2014, 333(16):3657-3670.
[7] HOFMEISTER B, BRUNS M, ROLFES R. Finite element model updating using deterministic optimisation:A global pattern search approach[J]. Engineering Structures, 2019, 195:373-381.
[8] NGAN J W, CAPRANI C C, BAI Y. Full-field finite element model updating using zernike moment descriptors for structures exhibiting localized mode shapes[J]. Mechanical Systems and Signal Processing, 2019, 121:373-388.
[9] 费庆国, 张令弥, 李爱群, 等. 基于统计分析技术的有限元模型修正研究[J]. 振动与冲击, 2005, 24(3):23-26. FEI Q G, ZHANG L M, LI A Q, et al. Study on finite element model updating based on statistical analysis technology[J]. Journal of Vibration and Shock, 2005, 24(3):23-26(in Chinese).
[10] SESTIERI A, D'AMBROGIO W. Why be modal:How to avoid the use of modes in the modification of vibrating systems[J]. International Journal of Analytical and Experimental Modal Analysis, 1989, 26(4):25-30.
[11] WEISSENBURGER J T. Effect of local modifications on the vibration characteristics of linear systems[J]. Journal of Applied Mechanics, 1968, 35(2):327-322.
[12] ZHU D P, DONG X J, WANG Y, et al. Substructure stiffness and mass updating through minimization of modal dynamic residuals[J]. Journal of Engineering Mechanics, 2016, 142(5):04016013.
[13] 翁顺, 左越, 朱宏平, 等. 基于子结构的有限元模型修正方法[J]. 振动与冲击, 2017, 36(4):100-104. WENG S,ZUO Y,ZHU H P, et al. Model updating based on a substructuring method[J]. Journal of Vibration and Shock, 2017, 36(4):100-104(in Chinese).
[14] GUO N, YANG Z C, LE W, et al. A updating method using strain frequency response function with emphasis on local structure[J]. Mechanical Systems and Signal Processing, 2019, 115:637-656.
[15] WANG M, WANG D, ZHENG G. Joint dynamic properties identification with partially measured frequency response function[J]. Mechanical Systems and Signal Processing, 2012, 27:499-512.
[16] D'AMBROGIO W, FREGOLENT A. Substructure decoupling without using rotational DOFs:Fact or fiction?[J]. Mechanical Systems and Signal Processing, 2016, 72-73:499-512.
[17] DAMJAN C, MIHA B. Identification of the dynamic properties of joints using frequency-response functions[J]. Journal of Sound and Vibration, 2008, 317(1-2):158-174.
[18] JETMUNDSEN B, BIELAWA R L, FLANNELLY W G. Generalized frequency domain substructure synthesis[J]. Journal of the American Helicopter Society, 1988, 33(1):55-64.
[19] TOL S, OZGUVEN H N. Dynamic characterization of bolted joints using FRF decoupling and optimization[J]. Mechanical Systems and Signal Processing, 2015, 54-55:124-138.
[20] 王彤, 张令弥. 计及随机噪声的频域多输入多输出模态参数识别[J]. 航空学报, 2004, 25(6):560-564. WANG T, ZHANG L M. Freguency domain multiple input/output modal parameters identification with consideration of stochastic noise[J]. Acta Aeronautica et Astronautica Sinica, 2004, 25(6):560-564(in Chinese).
[21] PU Q H, HONG Y, CHEN L J, et al. Model updating-based damage detection of a concrete beam utilizing experimental damped frequency response functions[J]. Advances in Structural Engineering,2019, 22(4):935-947.
[22] GANG X Y, CHAI S, ALLEMANG R J, et al. A new iterative model updating method using incomplete frequency response function data[J]. Journal of Sound and Vibration, 2014, 333(9):2443-2453.
[23] 王缅. 有限元动力学宽频带计算与连接结构实验建模方法研究[D]. 北京:清华大学, 2011:56-73. WANG M. Broadband dynamic computation and experimental connenction modelling with finite element method[D]. Beijing:Tsinghua University, 2011:56-73(in Chinese).
[24] PEETERS P, MANZATO S, TAMAROZZI T, et al. Reducing the impact of measurement errors in FRF-based substructure decoupling using a modal model[J]. Mechanical Systems and Signal Processing, 2018, 99:384-402.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

一种针对局部结构的有限元模型修正方法

A finite element model updating method for local structures

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	李玉涵, 杨宝玉, 吴亦农, 张强, 唐晓. 卫星光机载荷热模型参数高效修正方法研究进展[J]. 航空学报, 2024, 45(6): 628814-628814.
[2]	王震宇, 王计真, 杨婧艺, 何鹏远, 潘成浩, 周凌波, 何成, 何欢. 基于新型粒子群算法的结构动力学热振模型修正[J]. 航空学报, 2023, 44(7): 226559-226559.
[3]	李金晟, 庄凌, 宋加洪, 卢宝刚, 苏伟, 吴乔. 适用于工程数据的飞行器气动特性修正框架[J]. 航空学报, 2022, 43(5): 125157-125157.
[4]	彭珍瑞, 曹明明, 刘满东. 基于加速度频响函数小波分解的模型修正方法[J]. 航空学报, 2020, 41(7): 223548-223548.
[5]	张亦知, 程诚, 范钇彤, 李高华, 李伟鹏. 基于物理知识约束的数据驱动式湍流模型修正及槽道湍流计算验证[J]. 航空学报, 2020, 41(3): 123282-123282.
[6]	毕司峰, 邓忠民. 基于随机抽样与距离判别的GARTEUR模型修正与确认研究[J]. 航空学报, 2013, 34(12): 2757-2767.
[7]	张保强, 陈国平, 郭勤涛. 模型确认热传导挑战问题求解的贝叶斯方法[J]. 航空学报, 2011, 32(7): 1202-1209.
[8]	张安平;陈国平. 基于混合人工鱼群算法的结构有限元模型修正[J]. 航空学报, 2010, 31(5): 940-945.
[9]	孙鑫晖;张令弥;王彤. 基于左矩阵分式模型的模态参数识别方法[J]. 航空学报, 2010, 31(1): 125-130.
[10]	费庆国;张令弥;郭勤涛. GARTEUR有限元模型修正与确认研究[J]. 航空学报, 2004, 25(4): 372-375.
[11]	王彤;张令弥. 有理分式正交多项式频响函数模态参数识别[J]. 航空学报, 2003, 24(2): 140-143.
[12]	冯文贤;陈新. 基于实验复模态参数的有限元模型修正[J]. 航空学报, 1999, 20(1): 11-16.
[13]	齐丕骞;葛祖德;李炳功;许光启. 振动试验和颤振分析的一体化——颤振实时分析系统[J]. 航空学报, 1990, 11(11): 623-625.
[14]	王谓季;张阿舟. 振动特性敏感区上的结构故障诊断与监测[J]. 航空学报, 1987, 8(3): 138-144.
[15]	李岳锋;吕民富. 多输入一多输出频响函数估计[J]. 航空学报, 1986, 7(6): 596-603.