基于中性层偏移的Z型材滚弯成形回弹预测

doi:10.7527/S1000-6893.2019.23127

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 |

基于中性层偏移的Z型材滚弯成形回弹预测

王安恒¹, 薛红前¹, 杨艳丽¹, 魏耀光²

1. 西北工业大学机电学院, 西安 710072;
2. 航空工业成都飞机工业(集团)有限责任公司, 成都 610092

收稿日期:2019-05-05 修回日期:2019-05-28 出版日期:2019-12-15 发布日期:2019-07-02
通讯作者: 薛红前 E-mail:xuedang@nwpu.edu.cn
基金资助:
国家自然科学基金（91860206）；陕西省重点研发计划（2019KW-063）

Springback prediction for Z-shaped profiles in roll bending process based on neutral layer shift

WANG Anheng¹, XUE Hongqian¹, YANG Yanli¹, WEI Yaoguang²

1. School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China;
2. AVIC Chengdu Aircraft Industrial(Group) Co., Ltd., Chengdu 610092, China

Received:2019-05-05 Revised:2019-05-28 Online:2019-12-15 Published:2019-07-02
Supported by:
National Natural Science Foundation of China (91860206); Shaanxi Province Key R & D Program (2019KW-063)

摘要/Abstract

摘要： 以提高大截面Z型材四轴滚弯成形精度为目的，通过综合考虑材料属性、几何特征和成形半径等因素对回弹的影响，建立了引入中性层偏移的大截面Z型材弯曲回弹解析模型，研究了7075-O和7475-O铝合金Z型材在不同滚弯成形半径下的回弹规律，并进行滚弯成形实验验证。结果表明，与忽略中性层偏移影响的型材回弹预测经验模型相比，基于中性层偏移的回弹预测模型能够准确预测大截面Z型材的回弹量，在相同的曲率半径下，预测回弹变形的最大相对误差从11.681%减小到3.347%。

关键词: Z型材, 大截面, 回弹预测, 解析模型, 中性层偏移, 滚弯成形

Abstract: This paper focuses on improving the forming precision of Z-shaped profiles with large-section in the four-roll bending process. An analytical springback model is established for Z-shaped profiles with large-section by introducing neutral layer shift, considering the influence of material properties, geometric parameters, and forming radii on the springback. The bending springback laws of 7075-O and 7475-O aluminum alloy Z-section profiles under different forming radii are studied, and roll bending tests are carried out to validate the springback model. The results indicate that compared with the empirical model which ignores the influence of neutral layer shift, the proposed model based on neutral layer shift can accurately predict the springback for Z-shaped profiles with large cross-section. The maximum relative error of predicting springback deformation for Z-shaped profiles with the same radius of curvature changes from 11.681% to 3.347%.

Key words: Z-shaped profiles, large cross-section, springback prediction, analytical model, neutral layer shift, roll bending forming

中图分类号:

王安恒, 薛红前, 杨艳丽, 魏耀光. 基于中性层偏移的Z型材滚弯成形回弹预测[J]. 航空学报, 2019, 40(12): 423127-423127.

WANG Anheng, XUE Hongqian, YANG Yanli, WEI Yaoguang. Springback prediction for Z-shaped profiles in roll bending process based on neutral layer shift[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(12): 423127-423127.

参考文献 25

[1]	YU J Q, ZHAO G Q, CHEN L. Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles[J]. Journal of Materials Processing Technology, 2016, 230:153-166.
[2]	LOU S M, ZHAO G Q, WANG R, et al. Modeling of aluminum alloy profile extrusion process using finite volume method[J]. Journal of Materials Processing Technology, 2008, 206(1-3):481-490.
[3]	HUA M, BAINES K, COLE I M. Bending mechanisms, experimental techniques and preliminary tests for the continuous four-roll plate bending process[J]. Journal of Materials Processing Technology, 1995, 48:159-172.
[4]	CAI Z Y, LI M Z, LAN Y W. Three-dimensional sheet metal continuous forming process based on flexible roll bending:Principle and experiments[J]. Journal of Materials Processing Technology, 2012, 212(1):120-127.
[5]	BAEK G, SHIM D. FE Simulation-based process design for manufacturing structural members of commercial vehicle using pipes with rectangular cross-sections[J]. International Journal of Precision Engineering and Manufacturing, 2015, 16(4):723-733.
[6]	HUA M. The mechanics of continuous roller bending of plates[D]. Aston:Aston University, 1986.
[7]	HUA M, SANSOME D H, BAINES K. Mathematical modeling of the internal bending moment at the top roll contact in multi-pass four-roll thin-plate bending[J]. Journal of Materials Processing Technology, 1995, 52(2):425-459.
[8]	陈毓勋. 板材与型材弯曲回弹控制原理与方法[M]. 北京:国防工业出版社, 1990:116-123. CHEN Y X. Principle and method of springback control of plate and profiles[M]. Beijing:National Defense Industry Press, 1990:116-123(in Chinese).
[9]	EL-DOMIATY A A, ELSHARKAWY A A. Stretch-bending analysis of U-section beams[J]. International Journal of Machine Tools and Manufacture, 1998, 38(1):75-95.
[10]	ELSHARKAWY A A, EL-DOMIATY A A. Determination of stretch-bendability limits and springback for T-section beams[J]. Journal of Materials Processing Tech, 2001, 110(3):265-276.
[11]	YU C L, LI X Q. Theoretical analysis on springback of L-section extrusion in rotary stretch bending process[J]. Transactions of Nonferrous Metals Society of China, 2011, 21(12):2705-2710.
[12]	ZHAI R X, DING X H, YU S M, et al. Stretch bending and springback of profile in the loading method of prebending and tension[J]. International Journal of Mechanical Sciences, 2018, 144:746-764.
[13]	ZHU Y X, CHEN W, LI H P, et al. Springback study of RDB of rectangular H96 tube[J]. International Journal of Mechanical Sciences, 2018, 138:282-294.
[14]	LI H, YANG H, SONG F F, et al. Springback characterization and behaviors of high-strength Ti-3Al-2.5V tube in cold rotary draw bending[J]. Journal of Materials Processing Technology, 2012, 212(9):1973-1987.
[15]	LI H, MA J, LIU B Y, et al. An insight into neutral layer shifting in tube bending[J]. International Journal of Machine Tools and Manufacture, 2018, 126:51-70.
[16]	刘碧颖,李恒,李龙,等. 引入材料参数的弯管中性层偏移解析模型[J]. 航空学报, 2016,37(3):1074-1082. LIU B Y, LI H, LI L, et al. Analytical model of neutral layer displacement of pipe parameters[J]. Acta Aeronautica et Astronautica Sinica, 2016,37(3):1074-1082(in Chinese).
[17]	LIU T J, WANG Y J, WANG J B, et al. Springback analysis of Z & T-section 2196-T8511 and 2099-T83 Al-Li alloys extrusions in displacement controlled cold stretch bending[J]. Journal of Materials Processing Technology, 2015, 225:295-309.
[18]	马自勇,马立峰,黄庆学,等. 基于弹塑性压力中性层偏移的棒材二辊矫直回弹模型[J]. 中南大学学报(自然科学版), 2016, 47(9):3020-3030. MA Z Y, MA L F, HUANG Q X, et al. Neutral layer offset rebound model based on elastic-plastic pressure[J]. Journal of Central South University(Science and Techno-logy), 2016, 47(9):3020-3030(in Chinese).
[19]	ZHAN M, WANG Y, YANG H, et al. An analytic model for tube bending springback considering different parameter variations of Ti-alloy tubes[J]. Journal of Materials Processing Technology, 2016, 236:123-137.
[20]	ZHAN M, XING L, GAO P F, et al. An analytical springback model for bending of welded tube considering the weld characteristics[J]. International Journal of Mechanical Sciences, 2019, 150:594-609.
[21]	官英平,张庆,赵军. 中性层内移对弯曲回弹的影响[J]. 锻压技术, 2007, 32(2):26-28. GUAN Y P, ZHANG Q, ZHAO J. Influence of neutral layer in side displacement on bending springback[J]. Forging & Stamping Technology, 2007, 32(2):26-28(in Chinese).
[22]	MARCINIAK Z, DUNCAN J L, HU S J. Mechanics of sheet metal forming.[M]. Oxford:Butterworth-Heinemann, 2002:82-107.
[23]	HILL R. The mathematical theory of plasticity[M]. New York:Oxford University Press, 1950.
[24]	WAGONER R, LI M. Simulation of springback:Through-thickness integration[J]. International Journal of Plasticity, 2007, 23(3):345-360.
[25]	HAN C, FENG H, YUAN S J. Springback and compensation of bending for hydroforming of advanced high-strength steel welded tubes[J]. International Journal of Advanced Manufacturing Technology, 2017, 89(9-12):3619-3629.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

基于中性层偏移的Z型材滚弯成形回弹预测

Springback prediction for Z-shaped profiles in roll bending process based on neutral layer shift

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 25

相关文章 5

编辑推荐

Metrics

本文评价

[1]	陈泽灏, 陈晖, 高玉闪, 张航. 基于模型的液体火箭发动机故障诊断技术回顾与展望[J]. 航空学报, 2023, 44(23): 629016-629016.
[2]	杨路易, 张海联, 彭祺擘, 李海阳, 武新峰. 不同升降轨返回方式下定点返回轨道窗口解析分析方法[J]. 航空学报, 2023, 44(15): 528748-528748.
[3]	周如意, 丰文浩, 邓宗全, 高海波, 丁亮, 李楠. 轮地力学模型参数灵敏度分析与主参数估计[J]. 航空学报, 2021, 42(1): 524076-524076.
[4]	刘碧颖, 李恒, 李龙, 杨合, 谷瑞杰. 引入材料参数的弯管中性层偏移解析模型[J]. 航空学报, 2016, 37(3): 1074-1082.
[5]	李金魁;姚枚;王仁智. 喷丸残余应力场解析模型及其试验验证[J]. 航空学报, 1989, 10(11): 625-629.