| [1] Jiang H S, Duan S X. Aerial engine spare parts EDM technology research[J]. Electromachining & Mould, 1992(2): 9-15. (in Chinese) 蒋亨顺, 段绍信. 航空发动机零件电火花加工工艺研究[J]. 电加工与模具, 1992(2): 9-15.[2] Guo J S, Ding F Y, Zhang Y P. Experimental research on the method of time control applied to the precision surface of aerial part in EDM[J]. Electromachining & Mould, 2010(5): 52-55. (in Chinese) 郭建设, 丁凤英, 张云鹏, 等. 时间控制法应用于某航空精密型面零件的电火花加工试验研究[J]. 电加工与模具, 2010 (5): 52-55.[3] Wang L, Liu Z D, Qiu M B, et al. Study of TC4 controllable burned efficient grinding induced by electrical discharge machining[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(8): 1524-1530 (in Chinese) 王琳, 刘志东, 邱明波, 等. 钛合金TC4电火花诱导可控烧蚀高效磨削技术研究[J]. 航空学报, 2012, 33(8): 1524-1530.[4] Zhao W S. Advanced electrical discharge machining technology[M]. Beijing: National Defense Industry Press, 2003: 55-59. (in Chinese) 赵万生. 先进电火花加工技术[M]. 北京: 国防工业出版社, 2003: 55-59.[5] Liu G Z, Yang X D, Chi G X, et al. EDM milling technology and development[J]. Electromachining, 1998(1):1-5. (in Chinese) 刘光壮, 杨晓冬, 迟关心, 等. 电火花铣削加工技术及其发展状况[J]. 电加工, 1998 (1): 1-5.[6] Jiang Y Z. Application of EDM milling in Aerospace Manufacture[J]. Aviation of Precision Manufacturing Technology, 2013, 49(1): 54-56. (in Chinese) 姜玉珍. 电火花铣削在航空制造中的应用[J]. 航空精密制造技术, 2013, 49(1): 54-56.[7] Yu Z Y, Masuzawa T, Fujino M. Micro-EDM for three-dimensional cavities-development of uniform wear method[J]. CIRP Annals-Manufacturing Technology, 1998, 47(1): 169-172.[8] Yu H L, Luan J J, Li J Z, et al. A new electrode wear compensation method for improving performance in 3D micro EDM milling[J]. Journal of Micromechanics and Microengineering, 2010, 20(5): 1-7.[9] Bleys P, Kruth J P, Lauwers B, et al. Real-time tool wear compensation in milling EDM[J]. Annuals of the CIRP, 2002, 51(1): 157-160.[10] Bleys P, Kruth J P, Lauwers B. Sensing and compensation of tool wear in milling EDM[J], Journal of Materials Processing Technology, 2004, 149(1): 139-146.[11] Chang Y F, Chiu Z H. Electrode wear-compensation of electric discharge scanning process using a robust gap-control[J]. Mechatronics, 2004, 14(10): 1121-1139.[12] Mu T, Yan K Y, Huang C, et al. A study on electrode wear sensing and compensation in Micro-EDM using machine vision system[J]. Manufacturing Technology. 2009, 42(11-12): 1065-1073.[13] Liu G Z, Yang X D. Electrode wear compensation of EDM milling[J]. Manufacturing Technology & Machine Tool, 1998(8): 30-32. (in Chinese) 刘光壮, 杨晓冬. 电火花铣削加工的电极损耗补偿[J]. 制造技术与机床, 1998 (8): 30-32.[14] Chi G X, Chu X Y, Di S C, et al. Micro-EDM milling with tube electrode[J]. Journal of Jilin University. 2011, 41(Sup.1): 121-126. (in Chinese) 迟关心, 褚旭阳, 狄士春, 等. 管电极微细电火花铣削加工. 吉林大学学报[J]. 2011, 41(增刊1): 121-126.[15] Zhou Y, Liu Z X. Research on compensation of tool electrode wear in EDMM[J]. Aviation Precision Manufacturing Technology, 1998(34): 11-14. (in Chinese) 周勇, 刘正埙. 电火花铣削加工中工具电极损耗补偿策略研究[J]. 航空精密制造技术, 1998(34): 11-14.[16] Pei J Y, Deng R, Hu D J. Bottom surface profile of single slot and fix-length compensation method in micro-EDM process[J]. Journal of Shanghai Jiao Tong University, 2007(6): 42-46. (in Chinese) 裴景玉, 邓容, 胡德金. 微细电火花加工的底面轮廓模型及定长补偿方法[J]. 上海交通大学学报, 2007(6): 42-46.[17] Xu J L, Li J G, Pei J Y, et al. The fix-length compensation method in single-layer multi-channel machining micro-EDM[J]. Electromachining & Mould, 2009(3): 15-19. (in Chinese) 许加利, 李建功, 裴景玉, 等.单层多道微细电火花定长补偿加工方法[J]. 电加工与模具, 2009(3): 15-19. |
CJA
