2.5D碳/碳复合材料指尖密封动态性能分析

doi:10.7527/S1000-6893.2013.0270

材料工程与机械制造

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

2.5D碳/碳复合材料指尖密封动态性能分析

路菲, 陈国定, 苏华, 王莉娜

西北工业大学机电学院, 陕西西安 710072

收稿日期:2013-01-18 修回日期:2013-06-06 出版日期:2013-11-25 发布日期:2013-06-09
通讯作者: 陈国定，Tel.：029-88493929 E-mail：gdchen@nwpu.edu.cn E-mail:gdchen@nwpu.edu.cn
作者简介:路菲女，博士研究生。主要研究方向：机械系统密封与润滑等。 E-mail：lufei@mail.nwpu.edu.cn；陈国定男，博士，教授。主要研究方向：润滑与密封技术、机电系统热分析和现代机械设计理论与方法等。 Tel：029-88493929 E-mail：gdchen@nwpu.edu.cn；苏华女，博士，副教授。主要研究方向：润滑与密封技术、机械系统及零部件动力学分析和优化设计。 E-mail：huasu@nwpu.edu.cn；王莉娜女，博士研究生。主要研究方向：机械系统密封与润滑等。 E-mail：wangxiweigood@163.com
基金资助:
国家自然科学基金（50575182）;陕西省自然科学基金（2009JM7002）

Analysis of Dynamic Performance for 2.5D Carbon-carbon Composite Finger Seals

LU Fei, CHEN Guoding, SU Hua, WANG Li'na

School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China

Received:2013-01-18 Revised:2013-06-06 Online:2013-11-25 Published:2013-06-09
Supported by:
National Natural Science Foundation of China (50575182);Natural Science Foundation of Shaanxi Province (2009JM7002).

摘要/Abstract

摘要：

指尖密封的泄漏与磨损一直是影响其工作性能和寿命的重要因素，且因两者性能改善途径的相互制约，使得指尖密封的优化设计举措难以两全，迄今尚无更好的技术解决这一难题。采用诸如碳/碳复合材料制备指尖密封零件，利用碳/碳复合材料具有的自润滑功能以更多地关注密封泄漏性能的改善，可能是改善上述研究现状的可行技术途径，而作为设计理论的基础，开展碳/碳复合材料指尖密封性能分析是很有意义的工作。论文利用细观组分材料的性能来计算2.5D碳/碳复合材料刚度矩阵，由此预测材料宏观弹性性能，建立2.5D碳/碳复合材料指尖密封动态性能分析的有限元模型，研究材料纱线密度和纱线编织结构对指尖密封动态性能的影响规律。研究结果表明：增大指尖密封圆周方向上的纱线密度、采用浅交直联纱线编织结构都可以显著提高指尖密封的密封性能，较之金属材料指尖密封，2.5D碳/碳复合材料指尖密封的动态性能表现出更好的品质。本文研究支持了碳/碳复合材料应用于指尖密封制备的可行性。

关键词: 碳/碳复合材料, 指尖密封, 刚度矩阵, 动态分析, 位移响应, 接触压力

Abstract:

Leakage and wear of a finger seal are two key factors that affect seal dynamic performance and service life. Optimum design of a finger seal structure is difficult to realize because of the mutual suppression between the two factors in seal performance improvement. Carbon-carbon composites are applied to finger seal component preparation to improve seal performance for its self-lubrication property, which may prove to be a most feasible solution to this issue. It is meaningful work to carry out an analysis for carbon-carbon composite finger seal performance to provide the theoretical basis for its design. This paper evaluated the elastic properties of the materials by using the constituent material properties to calculate the stiffness matrix of the 2.5D carbon-carbon composites, and established a finite element model for carbon-carbon composite finger seal dynamic performance analysis. By this model, the effects of yarn density and weaving mode on the dynamic performance of finger seals are studied. The results show that increasing the yarn density in the circumferential direction of the finger seal and using shallow direct-joint structure can improve the finger seal dynamic performance. Finally, compared with metalseals, the 2.5D carbon-carbon composite finger seal exhibits better seal dynamic performance. The study shows that it is feasible to use carbon-carbon composites for finger seal component preparation.

Key words: carbon-carbon composites, finger seal, stiffness matrix, dynamic analysis, displacement response, contact pressure

中图分类号:

V257
TB743

路菲, 陈国定, 苏华, 王莉娜. 2.5D碳/碳复合材料指尖密封动态性能分析[J]. 航空学报, 2013, 34(11): 2616-2625.

LU Fei, CHEN Guoding, SU Hua, WANG Li'na. Analysis of Dynamic Performance for 2.5D Carbon-carbon Composite Finger Seals[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(11): 2616-2625.

参考文献

[1] Proctor M P,Kumar A,Delgado I R.High-speed,high-temperature finger seal test results.Journal of Propulsion and Power,2004,20(2): 312-318.

[2] Proctor M P,Delgado I R.Leakage and power loss test results for competing turbine engine seals.NASA/TM-2004-213049,2004: 441-451.

[3] Gibson N E,Takeuchi D,Hynes T,et al.Second generation air-to-air mechanical seal design and performance.AIAA-2011-5636,2011.

[4] Li E S,Chen G D.Study on a new shape-curve of finger seal with low-hysteresis and low-wear.Journal of Aerospace Power,2008,23(4): 759-764.(in Chinese) 李二圣,陈国定.一种低迟滞低磨损的指尖密封型线构形的研究.航空动力学报,2008,23(4): 759-764.

[5] Su H,Chen G D.Study on the comprehensive capability of finger seal with assembling finger-cell.China Mechanical Engineering,2007,18(4): 379-381.(in Chinese) 苏华,陈国定.单元组合形式的指尖密封综合性能研究.中国机械工程,2007,18(4): 379-381.

[6] Wu Y E,Chen G D,Lei Y N.Engineering optimization design of shape-curve of finger-seal of aero-engine.Jounal of Northwestern Polytechnical University,2006,24(2): 260-264.(in Chinese) 吴银娥,陈国定,雷燕妮.指尖密封型线主动控制优化设计研究.西北工业大学学报,2006,24(2): 260-264.

[7] Su H,Chen G D.APDI based structural optimization and sensitivity analysis for low hysteresis finger seal.Proceedings of the 6th international conference on frontiers of design and manufacturing.Xi'an,China: Science Press USA Incorporated,2004.

[8] Zong Z K,Su H.Geometric feature and structure optimization of arc finger seal.Acta Aeronoutica et Astronautica Sinica,2010,31(2): 393-399.(in Chinese) 宗兆科,苏华.圆弧型指尖密封的几何构型特征及结构优化.航空学报,2010,31(2): 393-399.

[9] Su H,Chen G D.Structural optimization of finger seal based on conceptions of "customized" and "generalized" finger curves.Acta Aeronoutica et Astronautica Sinica,2007,28(6): 1506-1512.(in Chinese) 苏华,陈国定."定制"与"广义"概念下的指尖密封结构优化.航空学报,2007,28(6): 1506-1512.

[10] Zhang Y C,Chen G D,Zhou L J,et al.New method for performance optimization of finger seals.Journal of Mechanical Engineering,2010,46(10): 156-163.(in Chinese) 张延超,陈国定,周连杰,等.指尖密封性能优化的一种新方法.机械工程学报,2010,46(10): 156-163.

[11] Dong W F,Xiao J,Li Y,et al.Theoretical study on elastic properties of 2.5D braided composites.Journal of Nanjing University of Aeronautics & Astronautics,2005,37(5): 659-663.(in Chinese) 董伟锋,肖军,李勇,等.2.5维编织复合材料弹性性能的理论研究.南京航空航天大学学报,2005,37(5): 659-663.

[12] Yi X S,Du S Y,Zhang L T.Composites handbook.Beijing: Chemical Industry Press,2009: 192-197.(in Chinese) 益小苏,杜善义,张立同.复合材料手册.北京: 化学工业出版社,2009: 192-197.

[13] Chinese Aeronautical Establishment.Composites structures design handbook.Beijing: Aviation Industry Press,2001: 577-581.(in Chinese) 中国航空研究院.复合材料结构设计手册.北京:航空工业出版社,2001: 577-581.

[14] Nehme S,Hallal A,Fardoun F,et al.Numerical/analytical methods to evaluate the mechanical behavior of interlock composites.Journal of Composite Materials,2011,45(16): 1699-1716.

[15] Shen G L,Hu G K.Mechanics of composite materials.Beijing: Tsinghua University Press,2006: 37-42.(in Chinese) 沈观林,胡更开.复合材料力学.北京: 清华大学出版社,2006: 37-42.

[16] Voyiadjis G Z,Kattan P I.Mechanics of composite materials with MATLAB.Springer,2005.

[17] Hallal A,Younes R,Nehme S,et al.A corrective function for the estimation of the longitudinal Young's modulus in a developed analytical model for 2.5D woven composites.Journal of Composite Materials,2010,45(17): 1793-1804.

[18] Zhang Y C,Chen G D,Shen X L.Analysis of dynamic performance and leakage for finger seal.Acta Aeronoutica et Astronautica Sinica,2009,30(11): 2193-2199.(in Chinese) 张延超,陈国定,申晓龙.指尖密封动态性能分析与泄漏量计算.航空学报,2009,30(11): 2193-2199.

[19] Wang B L.Investigation on the mechanical properties and size effect of three-dimensionial braided composites.Harbin: Center for Composite Materials,Harbin Institute of Technology,2009.(in Chinese) 王宝来.三维编织复合材料的力学性能和尺寸效应研究.哈尔滨: 哈尔滨工业大学复合材料与结构研究所,2009.ysteresis finger seal. Proceedings of the 6 International Conference on Frontiers of Design and Manufacturing. Xi an, China: June 21—23, 2004.

[8] Zong Zhaoke, Su Hua. Geometric Feature and Structure Optimization of Arc Finger Seal. ACTA AERONAUTICA ET ASTRONAUTICA SINICA, 2010, 31(2):393-399. (in Chinese)

宗兆科, 苏华. 圆弧型指尖密封的几何构型特征及结构优化. 航空学报, 2010, 31(2):393-399.

[9] Su Hua, Chen Guoding. Structual Optimization of Finger Seal Based on Conceptions of “Customized” and “Generalized” Finger Curves. ACTA AERONAUTICA ET ASTRONAUTICA SINICA, 2007, 28(6):1506-1512. (in Chinese)

苏华, 陈国定. “定制”与“广义”概念下的指尖密封结构优化. 航空学报, 2007, 28(6):1506-1512.

[10] ZHANG Yanchao, CHEN Guoding, ZHOU Lianjie et al. New Method for Performance Optimization of Finger Seals. JOURNAL OF MECHANICAL ENGINEERING, 2010, 46(10):156-163. (in Chinese)

张延超, 陈国定, 周连杰等. 指尖密封性能优化的一种新方法. 机械工程学报, 2010, 46(10):156-163.

[11] DONG Wei-feng, XIAO Jun, LI Yong et al. Theoretical Study on Elastic Properties of 2.5D Braided Composites. Journal of Nanjing University of Aeronautics & Astronautics, 2005, 37(5):659-663. (in Chinese)

董伟锋, 肖军, 李勇等. 2.5维编织复合材料弹性性能的理论研究. 南京航空航天大学学报, 2005, 37(5):659-663.

[12] YI Xiao-su, Du ShanYi, ZHANG Li-tong. Composites Handbook. Beijing: Chemical Industry Press, 2009: 192-197. (in Chinese)

益小苏, 杜善义, 张立同. 复合材料手册. 北京: 化学工业出版社, 2009: 192-197

[13] Chinese Aeronautical Establishment. Composites Structures Design Handbook. Beijing: Chemical Industry Press, 2009: 192-197. (in Chinese)

中国航空研究院编著. 复合材料结构设计手册. 北京:航空工业出版社, 2001: 577-581

[14] Nehme, S. Numerical/analytical methods to evaluate the mechanical behavior of interlock composites. JOURNAL OF COMPOSITE MATERIALS, 2011. 45(16): 1699-1716

[15] SHEN Guanlin, HU Gengkai. Mechanics of composite materials. Beijing: TSINGHUA UNIVERSITY PRESS, 2006:37-42. (in Chinese)

沈观林, 胡更开. 复合材料力学. 北京：清华大学出版社, 2006:37-42.

[16] Voyiadjis, G. Z.. Mechanics of Composite Materials with MATLAB. Springer, 2005.

[17] Hallal, A., et al.. A corrective function for the estimation of the longitudinal Young's modulus in a developed analytical model for 2.5D woven composites. JOURNAL OF COMPOSITE MATERIALS. 2011, 45(17): 1793-1804.

[18] ZHANG Yanchao, CHEN Guoding, SHEN Xiaolong. Analysis of Dynamic Performance and leakage for Finger Seal. ACTA AERONAUTICA ET ASTRONAUTICA SINICA. 2009, 30(11):2193-2199. (in Chinese)

张延超, 陈国定, 申晓龙. 指尖密封动态性能分析与泄漏量计算. 航空学报. 2009, 30(11): 2193-2199.

[19] Wang Baolai. INVESTIGATION ON THE MECHANICAL PROPERTIES AND SIZE EFFECT OF THREE-DIMENSIONIAL BRAIDED COMPOSITES. Harbin: Center for Composite Materials, 2009. (in Chinese)

王宝来. 三维编织复合材料的力学性能和尺寸效应研究. 哈尔滨：哈尔滨工业大学复合材料与结构研究所, 2009.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

2.5D碳/碳复合材料指尖密封动态性能分析

Analysis of Dynamic Performance for 2.5D Carbon-carbon Composite Finger Seals

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	罗贺, 李晓多, 王国强. 能耗均衡的三维最优持久编队通信拓扑生成[J]. 航空学报, 2022, 43(1): 324922-324922.
[2]	骆燕燕, 蔡明, 于长潮, 王彪. 振动对电连接器接触性能退化的影响[J]. 航空学报, 2017, 38(8): 220936-220936.
[3]	曲巍崴, 侯鹏辉, 杨根军, 黄官平, 尹富成, 石鑫. 机器人加工系统刚度性能优化研究[J]. 航空学报, 2013, 34(12): 2823-2832.
[4]	郎达学, 苏华. 表面织构靴底流体动压指尖密封的性能分析[J]. 航空学报, 2012, 33(8): 1540-1546.
[5]	王喜春;苏华;宗兆科. 周向收敛型动压式指尖密封的结构优化及其动态性能仿真[J]. 航空学报, 2011, 32(2): 360-367.
[6]	宗兆科;苏华. 圆弧型指尖密封的几何构型特征及结构优化[J]. 航空学报, 2010, 31(2): 393-399.
[7]	杨茂胜;陈跃良. 微动疲劳结构应力强度因子有限元分析[J]. 航空学报, 2010, 31(10): 1968-1973.
[8]	高思阳;张晶;付强;刘芳. 纤维复合材料刚度设计的力学原理及其应用[J]. 航空学报, 2009, 30(7): 1227-1235.
[9]	张延超;陈国定;申晓龙. 指尖密封动态性能分析与泄漏量计算[J]. 航空学报, 2009, 30(11): 2193-2199.
[10]	马晓林;陈国定. 基于等效模型的流体动压指尖密封动力学及泄漏量分析[J]. 航空学报, 2008, 29(5): 1356-1263.
[11]	苏华;陈国定. “定制”与“广义”概念下的指尖密封结构优化[J]. 航空学报, 2007, 28(6): 1506-1512.
[12]	赵建国;李克智;李贺军;李爱军;席琛. 碳/碳复合材料导热性能的研究[J]. 航空学报, 2005, 26(4): 501-504.
[13]	毕燕洪;何永乐;金志浩. 碳/碳复合材料吸油和去油特性研究[J]. 航空学报, 2005, 26(4): 515-519.
[14]	侯宇;方宗德;刘岚;傅卫平. 仿生微扑翼飞行器机构动态分析与工程设计方法[J]. 航空学报, 2005, 26(2): 173-178.
[15]	孙万昌;李贺军;张秀莲. 高温处理对液相气化沉积碳/碳复合材料微观组织结构及力学性能的影响[J]. 航空学报, 2002, 23(3): 276-278.