TiFe0．86Cr0．1／NaM复合贮氢材料的合成与性质

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 1994, Vol. 15 ›› Issue (4): 507-511.

• 论文 • Previous Articles Next Articles

SYNTHESIS AND PROPERTIES OF A COMPLEX HYDROGEN STORAGE MATERIAL-TiFe0.86Cr0.1/NaM

Dong Jinxiang¹, Cao Jinhue¹, Li Jinping¹, Zhang Shaorui²

1. Research Institute of Special Chemicals Taiyuan University of Technology,Taiyuan,030024;2. Electric Power Branch Institute of Taiyuan University of Technology,Taiyuan,030013

Received:1992-07-13 Revised:1992-12-28 Online:1994-04-25 Published:1994-04-25

Abstract

Abstract: The synthesis conditions for preparing a complex hydrogen storage material-TiFe0.86Cr0.1/NaM have been studied by employing the vapour phase method. The more suitable conditions of Na_2O/(Na_2+Al_2O_3+SiO_2),SiO_2/Al_2O_3and alloy/Zeolites have been found in the research.The influence of the synthesis conditions on the hydrogen-storage capacity has been examined.The results indicate that it is better that zeolite is a pure phase and the alloy size is larger than 74μm. And TiFe0.86Cr0.1/NaM possesses a good antioxygen and anticarbon monoxide property.

Key words: titanium alloys, synthesis(chemistry), hydrogen production-storage

CLC Number:

Dong Jinxiang;Cao Jinhue;Li Jinping;Zhang Shaorui. SYNTHESIS AND PROPERTIES OF A COMPLEX HYDROGEN STORAGE MATERIAL-TiFe0.86Cr0.1/NaM[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1994, 15(4): 507-511.

[1]	YANG Huanping, ZHUANG Wei, WANG Yaomian, YAN Wenbin. Influence of severe plastic deformation on thermal oxidation of titanium alloys [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 424656-424656.
[2]	DING Wenfeng, XI Xinxin, ZHAN Jinghua, XU Jiuhua, FU Yucan, SU Honghua. Research status and future development of grinding technology of titanium materials for aero-engines [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019, 40(6): 22763-022763.
[3]	LUO Bin, ZHANG Kaifu, LI Yuan, CHENG Hui, LIU Shunuan. Influence of stiffness on thrust force and exit burr in drilling titanium plates [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(7): 2321-2330.
[4]	GUO Lianggang, YANG He, DI Weijia, CHEN Fulong, ZHU Shuai. Filling rules in thin-walled and ribbed conical ring rolling for TC4 titanium alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(8): 2798-2806.
[5]	WU Xinchen, CHEN Minghe, XIE Lansheng, ZHANG Tielei, HU Zhihua. Twist-bend forming of aeroengine titanium TC4 wide-chord hollow fan blade with complex geometries [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(6): 2055-2063.
[6]	LIU Zhidong, YIN Chunjing, QIU Mingbo, TIAN Zongjun. Titanium alloy controllable melting and explosion efficient turning induced by EDM [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(3): 995-1001.
[7]	LIU Jianhua, YANG Kang, YU Mei, LI Songmei, WU Liang, YU Xiumei. Preparation, Characterization and Fatigue Performance of Anodic Oxide Film on Titanium Alloy TC18 in Sodium Tartrate Electrolyte [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(3): 902-910.
[8]	ZHU Shuai, YANG He, GUO Lianggang, DI Weijia, FAN Yu. Simulation of Microstructure Evolution During the Whole Process of Radial-axial Rolling of TA15 Titanium Alloy Ring [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(11): 3145-3155.
[9]	CHEN Yan, YANG Shubao, FU Yucan, XU Jiuhua, SU Honghua. FEM Estimation of Tool Wear in High Speed Cutting of Ti6Al4V Alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(9): 2230-2240.
[10]	HE Qingshan, FU Yucan, XU Hongjun, MA Ke, CHEN Chen. Development of Annular Heat Pipe Grinding Wheel for High Efficiency Machining of TC4 Titanium Alloy [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(7): 1740-1747.
[11]	GUO Lianggang, CHEN Jianhua, YANG He, GU Ruijie. Response Rules of Strain and Temperature Fields to Roll Sizes During Hot Rolling Process of TC4 Titanium Alloy Conical Ring [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(6): 1463-1473.
[12]	CHEN Longhai, LIU Zhidong, QIU Mingbo, TIAN Zongjun, YIN Chunjing. Technical Research of Combined Machining of TC4 Titanium Alloy by EDM Induced Controllable Combustion and Turning Dressing [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(11): 2626-2634.
[13]	WANG Xiangzhi, LIU Zhidong, XUE Rongyuan, TIAN Zongjun, HUANG Yinhui. Research on Self-mixed Oxygen in Discharge Gap to Improve the Processing Characteristics of Titanium Alloy Electrical Discharge Machining [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(10): 2419-2426.
[14]	HANG Chao, YANG Guang, LI Yulong, YU Qifeng, GUO Yazhou. Application of Digital Image Correction Method to Test of Mechanical Properties for Weld Materials [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013, 34(10): 2372-2382.
[15]	WANG Yaoqi, HOU Hongliang, SUN Zhonggang. Plastic Effect of Hydrogenated Ti-6Al-4V Alloy and Its Application [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011, 32(8): 1563-1568.

SYNTHESIS AND PROPERTIES OF A COMPLEX HYDROGEN STORAGE MATERIAL-TiFe0.86Cr0.1/NaM

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments